binhex Posted January 15, 2019 Author Share Posted January 15, 2019 3 hours ago, just-magic said: Hi, when will there be an update to v4.0? thanks when its released as stable, its currently in beta. 1 Quote Link to comment
thostr Posted January 15, 2019 Share Posted January 15, 2019 (edited) 19 minutes ago, binhex said: when its released as stable, its currently in beta. Not correct. Emby 4.0 has been released. Docker images is already updated https://emby.media/announcing-emby-server-40.html Edited January 15, 2019 by thostr 1 Quote Link to comment
binhex Posted January 15, 2019 Author Share Posted January 15, 2019 (edited) 26 minutes ago, thostr said: Not correct. Emby 4.0 has been released. Docker images is already updated https://emby.media/announcing-emby-server-40.html ok that has changed then, i had a look at the downloads page and it was marked as beta, in any case the new image wont be built until arch linux repo has updated, fyi here is the link:- https://www.archlinux.org/packages/community/any/emby-server/ Looks like its still the case on the emby downloads page, note the BETA next to the download for 4.0.0.1 in the screenshot below:- Edited January 15, 2019 by binhex 2 Quote Link to comment
just-magic Posted January 19, 2019 Share Posted January 19, 2019 @binhex arch linux repo is now updated. thanks for your work. Quote Link to comment
just-magic Posted January 19, 2019 Share Posted January 19, 2019 (edited) unraid showed me the new update. after the update the version is still 3.5.3. do I still have to execute a command to get the update? Edited January 19, 2019 by just-magic 2 Quote Link to comment
bobdole Posted January 19, 2019 Share Posted January 19, 2019 3 hours ago, just-magic said: unraid showed me the new update. after the update the version is still 3.5.3. do I still have to execute a command to get the update? +1. same issue. took the latest update but did not get 4.x 1 Quote Link to comment
binhex Posted January 20, 2019 Author Share Posted January 20, 2019 +1. same issue. took the latest update but did not get 4.xTry latest now, had to raise a bug on arch repo but I saw a change which I assume has now fixed this.Sent from my EML-L29 using Tapatalk 2 Quote Link to comment
just-magic Posted January 23, 2019 Share Posted January 23, 2019 Hi binhex, i have the same problem like the release before. I have installed the Unraid Docker Update, but the version is still 4.0.0.2 😣 Quote Link to comment
binhex Posted January 23, 2019 Author Share Posted January 23, 2019 2 hours ago, just-magic said: Hi binhex, i have the same problem like the release before. I have installed the Unraid Docker Update, but the version is still 4.0.0.2 😣 uggh, ok i will verify this and raise another bug, this is getting annoying, according to arch linux package maintainer the issue is with the release from the emby team (upstream). Quote Link to comment
killeriq Posted January 23, 2019 Share Posted January 23, 2019 not sure if its here the right place to ask - but ive tried Emby, AirSonic, LibreSonic (with enabled uPnP) ...but my Denon receiver or Mobile app (BubbleUpnp) could see only PlexMediaServer or Serviio content. So cant really use those apps thanks Quote Link to comment
binhex Posted January 23, 2019 Author Share Posted January 23, 2019 (edited) 15 hours ago, just-magic said: Hi binhex, i have the same problem like the release before. I have installed the Unraid Docker Update, but the version is still 4.0.0.2 😣 ok so ive rebuilt it again and its now up to date, raised this as a bug as its clearly an issue but sadly arch package mantainer has his head firmly planted in his ass, sorry i meant sand, and refuses to look into it so its most probably going to happen again :--(. Edited January 23, 2019 by binhex 1 Quote Link to comment
Coolsaber57 Posted January 25, 2019 Share Posted January 25, 2019 (edited) Hey there, quick question: where do files get transcoded to? Is it the appdata folder or the mapped folder in the Template? Edit: actually I think I was able to answer my own question: Edited January 25, 2019 by Coolsaber57 Quote Link to comment
Coolsaber57 Posted January 25, 2019 Share Posted January 25, 2019 Hey @binhex I wanted to see if this was something you might have control over or if it was the maintainer: I've been trying to get an issue fixed with playback when my Bluetooth headset is connected to my emby client (Nvidia Shield) and Emby is pointing out that this docker uses an FFFMPEG build that is higher than what is officially supported by Emby (4.1). Is there a reason that FFMPEG in this docker container uses a different version that what's supported by Emby? Should that even matter? Quote Link to comment
binhex Posted January 26, 2019 Author Share Posted January 26, 2019 Hey [mention=11148]binhex[/mention] I wanted to see if this was something you might have control over or if it was the maintainer: I've been trying to get an issue fixed with playback when my Bluetooth headset is connected to my emby client (Nvidia Shield) and Emby is pointing out that this docker uses an FFFMPEG build that is higher than what is officially supported by Emby (4.1). Is there a reason that FFMPEG in this docker container uses a different version that what's supported by Emby? Should that even matter?Fixed.Sent from my EML-L29 using Tapatalk Quote Link to comment
Coolsaber57 Posted January 29, 2019 Share Posted January 29, 2019 On 1/26/2019 at 3:51 PM, binhex said: Fixed. Sent from my EML-L29 using Tapatalk Thank you! I'll give it a try and see if that fixes the issue I was having. Quote Link to comment
ClintSouthwood Posted January 30, 2019 Share Posted January 30, 2019 Mostly a lurker here but I didn't see this mentioned yet. The latest update seems to have removed the ability to use hardware transcoding for non-premium users. I really dislike the underhanded nature of placing current features behind a paywall and neglecting to mention their removal in the changelog. I've begun testing the Jellyfin fork though I had to set the docker up manually since there isn't a prebuilt one in the community apps yet. Quote Link to comment
binhex Posted January 30, 2019 Author Share Posted January 30, 2019 13 minutes ago, clintSoutwood said: I've begun testing the Jellyfin fork though I had to set the docker up manually since there isn't a prebuilt one in the community apps yet. oh yes there is 😁i built it yesterday, check CA 2 Quote Link to comment
ClintSouthwood Posted January 30, 2019 Share Posted January 30, 2019 (edited) 5 minutes ago, binhex said: oh yes there is 😁i built it yesterday, check CA Thank you for all your awesome builds, kind sir. Will migrate over to your container ASAP. Edited January 30, 2019 by clintSoutwood Quote Link to comment
Reloth Posted January 30, 2019 Share Posted January 30, 2019 2 hours ago, clintSoutwood said: I really dislike the underhanded nature of placing current features behind a paywall Totally agree with you man, 2 hours ago, clintSoutwood said: and neglecting to mention their removal in the changelog. but it is in the announcement -> https://emby.media/community/index.php?/topic/67937-announcing-emby-server-40/ (Don't want to be THAT guy, but I actually posted just to link the extended post, you might find some more info about the 4.0 version ) Quote Link to comment
ClintSouthwood Posted January 31, 2019 Share Posted January 31, 2019 (edited) On 1/30/2019 at 5:36 PM, Reloth said: Totally agree with you man, but it is in the announcement -> https://emby.media/community/index.php?/topic/67937-announcing-emby-server-40/ (Don't want to be THAT guy, but I actually posted just to link the extended post, you might find some more info about the 4.0 version ) Fair enough, I do see it in the post now, thanks for linking it. I did skim this post before upgrading but obviously missed that pertinent bit. I'll certainly be more careful going forward. Still, removing current (core/key) features, no matter how "improved" they are, is pretty low, IMO. This is not new behavior from the Emby team and, quite frankly, I'm not surprised - they've been on this trajectory for quite some time now. I respect developers and understand that they want to be paid for their effort but to change the entire business model just after gaining a decent userbase (most of whom likely jumped ship from Plex for similar reasons) is disturbing. I sincerely hope that Jellyfin takes off, it's mere existence indicates that I'm not the only one upset with the transition of FOSS into a closed-source, subscription-based model. Apologies for the rant, I know this isn't the place for it. Edited February 17, 2019 by clintSoutwood Quote Link to comment
gnollo Posted February 1, 2019 Share Posted February 1, 2019 Just to clarify, to update to 4.0.1 I will stop the old emby docker and then co to CA and install the new version? I do regular backups of the server via the backup plugin as well, so I guess if anything goes wrong I will restore the backup. Quote Link to comment
gnollo Posted February 2, 2019 Share Posted February 2, 2019 Well, I wish I never did that. My share where all my movies files does not work anymore. The files are still there but the share is broken. I have two different emby dockers, and both of them ask me to configure them like this is the first time I installed unraid. I cannot find the backup to reinstall it. I am not a happy camper. Quote Link to comment
gnollo Posted February 2, 2019 Share Posted February 2, 2019 Well, I solved the problem by removing the new version and manually deleting the folder. I think it's because the current Emby docker is not a binex one. How can I find out which variant of the docker it is?Sent from my SM-A520F using Tapatalk Quote Link to comment
JonathanM Posted February 2, 2019 Share Posted February 2, 2019 1 hour ago, gnollo said: How can I find out which variant of the docker it is? On the docker page change to advanced view in the upper right corner, and then look at the by: line beside the docker's icon. Quote Link to comment
gnollo Posted February 2, 2019 Share Posted February 2, 2019 by emby/embyserverSent from my SM-A520F using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.