milanp Posted May 15, 2018 Share Posted May 15, 2018 9 hours ago, CHBMB said: I'd appreciate it if someone does. I just install the drivers in Unraid for people to use, I really have no control over whether they work or not. Unless people report broken stuff to the manufacturers, then stuff will stay broken. Opened a ticket at Digital Devices: Case Tracking ID: PQB-Q98-951V Lets see if they care about linux at all. It's a pity that Digital Devices cards once configured, run perfectly, but I had a long frustrating period with them when I was running them on Ubuntu. Link to comment
du.perin Posted May 17, 2018 Share Posted May 17, 2018 (edited) Hi First of all, great plugin. Been using it for months, never had a single problem. With 6.5.2 version, i'm getting errors related to my tuner (DVBSky T330). May 17 18:03:35 NAS kernel: si2157 6-0060: found a 'Silicon Labs Si2157-A30'May 17 18:03:35 NAS kernel: si2157 6-0060: firmware version: 3.0.5May 17 18:03:35 NAS kernel: usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)May 17 18:03:35 NAS kernel: si2168 5-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2May 17 18:03:35 NAS kernel: si2168 5-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2May 17 18:03:35 NAS kernel: si2168 5-0064: firmware file 'dvb-demod-si2168-02.fw' not found lsusb: Bus 001 Device 003: ID 0572:0320 Conexant Systems (Rockwell), Inc. DVBSky T330 DVB-T2/C tuner unRAID Version: 6.5.2 Linux Kernel Version: 4.14.40 DVB Version: LibreELEC Driver Version: 1.22 DVB Kernel: Detected DVB Adapter Drivers: Detected DVB Adapter 0: Silicon Labs Si2168 The "/lib/firmware/" is read-only, so I tried to copy the fw file using the go script. I copied the fw file to /boot/firmware/ and added to the script: #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & #copy dvb fw echo "Copy fw" | logger cp /boot/firmware/*fw /lib/firmware/ May 17 20:32:24 NAS root: plugin: installed May 17 20:32:24 NAS root: Starting go script May 17 20:32:24 NAS root: Copy fw May 17 20:32:24 NAS root: Starting emhttpd But i cant find the 'dvb-demod-si2168-02.fw' on the /lib/firmware folder Any ideas? Edited May 17, 2018 by du.perin add lsusb info / go script Link to comment
DMcK Posted May 18, 2018 Share Posted May 18, 2018 Hi, CHBMB Can you think of any reason why LE 6.5.2-rc2 works on my Hauppauge 950q, but 6.5.2 doesn't? With 6.5.2, the driver is loaded, the adapter is detected, but I get no signal when trying to tune a channel. Only thing I see is that the filesize of bzfirmware is 11M with 6.5.2-rc2 and 4.5M with 6.5.2. Link to comment
du.perin Posted May 18, 2018 Share Posted May 18, 2018 1 hour ago, DMcK said: Hi, CHBMB Can you think of any reason why LE 6.5.2-rc2 works on my Hauppauge 950q, but 6.5.2 doesn't? With 6.5.2, the driver is loaded, the adapter is detected, but I get no signal when trying to tune a channel. Only thing I see is that the filesize of bzfirmware is 11M with 6.5.2-rc2 and 4.5M with 6.5.2. Same here! Just tried with LE 6.5.2-rc2 and my tuner is back to business. May 17 23:54:06 NAS kernel: si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' May 17 23:54:07 NAS kernel: si2168 5-0064: firmware version: B 4.0.11 May 17 23:54:07 NAS kernel: si2157 6-0060: found a 'Silicon Labs Si2157-A30' May 17 23:54:07 NAS kernel: si2157 6-0060: firmware version: 3.0.5 Link to comment
CHBMB Posted May 18, 2018 Share Posted May 18, 2018 Think I know what's happened. Will redo them tonight. Link to comment
ProGEEK Posted May 18, 2018 Share Posted May 18, 2018 (edited) hey @CHBMB, Drivers for cx23885 seem to have gone again too, from both 6.5.2-rc2 and 6.5.2 - LibreELEC build root@Daedalus:~# modprobe cx23885 modprobe: FATAL: Module cx23885 not found in directory /lib/modules/4.14.40-unRAID Edited May 18, 2018 by ProGEEK Link to comment
CHBMB Posted May 18, 2018 Share Posted May 18, 2018 hey [mention=6219]CHBMB[/mention], Drivers for cx23885 seem to have gone again too, from both 6.5.2-rc2 and 6.5.2 - LibreELEC buildroot@Daedalus:~# modprobe cx23885modprobe: FATAL: Module cx23885 not found in directory /lib/modules/4.14.40-unRAID I know, see the above three posts. I was playing around/breaking the script. Link to comment
DMcK Posted May 19, 2018 Share Posted May 19, 2018 Think I know what's happened. Will redo them tonight.Thanks! Will try it on the weekend. Link to comment
milanp Posted May 19, 2018 Share Posted May 19, 2018 @CHBMB Many thanks for the Digital Devices 6.5.2(GitHub) image, installed it a few hours ago, and so far it's working as expected. Link to comment
CHBMB Posted May 19, 2018 Share Posted May 19, 2018 @CHBMB Many thanks for the Digital Devices 6.5.2(GitHub) image, installed it a few hours ago, and so far it's working as expected.Yeah, I only did it to cover the Spectre/Meltdown issues fully. It will be the last one. Link to comment
CHBMB Posted May 19, 2018 Share Posted May 19, 2018 All builds rebuilt, although the error should only have affected LibreELEC and TBS varieties. Link to comment
NewDisplayName Posted May 19, 2018 Share Posted May 19, 2018 Is the a new version for the newest unraid version for libre? When i go to unraid DVB plugin, it just loads forever "Updating available builds" Link to comment
saarg Posted May 19, 2018 Share Posted May 19, 2018 1 hour ago, nuhll said: Is the a new version for the newest unraid version for libre? When i go to unraid DVB plugin, it just loads forever "Updating available builds" Try uninstalling/installing the plugin again and/or a reboot. Link to comment
DMcK Posted May 19, 2018 Share Posted May 19, 2018 7 hours ago, CHBMB said: All builds rebuilt, although the error should only have affected LibreELEC and TBS varieties. Working nicely now. Thanks again! Link to comment
du.perin Posted May 19, 2018 Share Posted May 19, 2018 7 hours ago, CHBMB said: All builds rebuilt, although the error should only have affected LibreELEC and TBS varieties. thanks! working 100% now Link to comment
ProGEEK Posted May 19, 2018 Share Posted May 19, 2018 Still missing the cx23885 module. And now that the 6.4* images have been removed I can't roll back to a working version Link to comment
CHBMB Posted May 19, 2018 Share Posted May 19, 2018 Hmmm, what version did you upgrade from, I did remove the older versions in an effort to reduce our hosting costs..... Link to comment
ProGEEK Posted May 19, 2018 Share Posted May 19, 2018 (edited) 7 minutes ago, CHBMB said: Hmmm, what version did you upgrade from, I did remove the older versions in an effort to reduce our hosting costs..... Upgraded from 6.4.2 to 6.5.2 as all previous 6.5.x releases have given me issues Im building the modules manually and i see that in your .config, CX23885 is disabled Edited May 19, 2018 by ProGEEK Link to comment
CHBMB Posted May 19, 2018 Share Posted May 19, 2018 Upgraded from 6.4.2 to 6.5.2 as all previous 6.5.x releases have given me issues Im building the modules manually and i see that in your .config, CX23885 is disabledYeah, must have buggered up the config, will fix it..... Link to comment
CHBMB Posted May 20, 2018 Share Posted May 20, 2018 Upgraded from 6.4.2 to 6.5.2 as all previous 6.5.x releases have given me issues Im building the modules manually and i see that in your .config, CX23885 is disabledRebuilt it again last night. Try now. Link to comment
NewDisplayName Posted May 21, 2018 Share Posted May 21, 2018 (edited) Hmm... i installed the newest version of unraid and reinstalled the plugin, still im not able to get beyond "Updating available builds". Which DNS Name it does try to resolve when clicking on the plugin? Edited May 21, 2018 by nuhll Link to comment
NewDisplayName Posted May 21, 2018 Share Posted May 21, 2018 (edited) Hm. Doesnt show up in piholes log at all. It might be the case that pihole is blocking the accesses. No doesnt show up, also, in unraid, pihole is not set as dns server, but just wanted to make sure. (tried again restarting) Any idea? Finally found something in log May 21 13:31:05 Unraid-Server nginx: 2018/05/21 13:31:05 [error] 4429#4429: *660 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.86.42, server: , request: "POST /plugins/UnraidDVB/include/exec.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.86.2:81", referrer: "http://192.168.86.2:81/Settings/UnraidDVB" Edited May 21, 2018 by nuhll Link to comment
CHBMB Posted May 23, 2018 Share Posted May 23, 2018 On 5/21/2018 at 12:21 PM, nuhll said: Hm. Doesnt show up in piholes log at all. It might be the case that pihole is blocking the accesses. No doesnt show up, also, in unraid, pihole is not set as dns server, but just wanted to make sure. (tried again restarting) Any idea? Finally found something in log ping -c4 mirror.linuxserver.io See if that works from your Unraid machine, if it doesn't and your plugin is the most recent version (2018.03.14) then it's something your end. Link to comment
NewDisplayName Posted May 23, 2018 Share Posted May 23, 2018 (edited) 30 minutes ago, CHBMB said: ping -c4 mirror.linuxserver.io See if that works from your Unraid machine, if it doesn't and your plugin is the most recent version (2018.03.14) then it's something your end. Thanks for your help! Good idea. root@Unraid-Server:~# ping -c4 mirror.linuxserver.io PING mirror.linuxserver.io (46.101.228.190) 56(84) bytes of data. 64 bytes from 46.101.228.190: icmp_seq=1 ttl=54 time=36.9 ms 64 bytes from 46.101.228.190: icmp_seq=2 ttl=54 time=47.8 ms 64 bytes from 46.101.228.190: icmp_seq=3 ttl=54 time=35.9 ms 64 bytes from 46.101.228.190: icmp_seq=4 ttl=54 time=44.7 ms --- mirror.linuxserver.io ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 7095ms rtt min/avg/max/mdev = 35.973/41.391/47.882/5.083 ms 2018.03.14 Edited May 23, 2018 by nuhll Link to comment
Recommended Posts