3 minutes ago, bobokun said:

 

Figured out what was wrong...it was stupid on my end. I'll post here so others won't make the dumb mistake like I did. In the template it shows that port 53 was assigned twice (Host 1 and Host 2) However I remember reading in this thread saying it's a duplicate and no need for one of those so I stupidly deleted the Host Port 2. Now I realized you need both (One is for UDP and one for TCP)

 

Yes - I need to add proper labels on those!

Thanks

Tony

It won't let me access it. let me try from MC.

5 minutes ago, LordShad0w said:

It won't let me access it. let me try from MC.

 

k, I have to go offline now.

Maybe a value was added to the allowed networks settings on the plex server via web interface (or automatically). Plex doesnt like the "not fully formed" ip address and is refusing to let you in....

 

Good luck!

Edited July 24, 20178 yr by spants

13 minutes ago, spants said:

is there a 192.168.1 item in allowedNetworks key in your Preferences.xml file

 

OK I got into it via MC and it shows 192.168.1/255.255.255.0 after LAN networks bandwidth? it's a bit hard to read in there.

Change 192.168.1 to 192.168.1.1 if that is your network ip range

Sent from my SM-G935F using Tapatalk

Or it might be 192.168.1.0 ...!

Sent from my SM-G935F using Tapatalk

pihole has been running now for a couple months no problems, Sunday I woke up to the error below when trying to start pihole. Unraid gui return's the error " Execution error - No such container" I run Dual eth network Balancerr & have been for quite some time. The only way I can start the container is if I turn off my bonding, or remove the custom IP i have set for pihole?

 

Could this be related to a recent update? or do you think its related to something with unraid?

 

time="2017-08-08T10:23:58.708812587-06:00" level=info msg="libcontainerd: new containerd process, pid: 27520" 
time="2017-08-08T10:23:59.714371318-06:00" level=warning msg="failed to rename /var/lib/docker/tmp for background deletion: %!s(<nil>). Deleting synchronously" 
time="2017-08-08T10:23:59.887721140-06:00" level=info msg="Graph migration to content-addressability took 0.00 seconds" 
time="2017-08-08T10:23:59.888489572-06:00" level=info msg="Loading containers: start." 
time="2017-08-08T10:24:00.276362739-06:00" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address" 
time="2017-08-08T10:24:00.544928841-06:00" level=info msg="Loading containers: done." 
time="2017-08-08T10:24:00.557624793-06:00" level=info msg="Daemon has completed initialization" 
time="2017-08-08T10:24:00.557677989-06:00" level=info msg="Docker daemon" commit=89658be graphdriver=btrfs version=17.05.0-ce 
time="2017-08-08T10:24:00.569239361-06:00" level=info msg="API listen on /var/run/docker.sock" 
time="2017-08-08T10:24:00.891177311-06:00" level=error msg="Handler for POST /v1.29/networks/create returned error: network dm-31b59fc8085d is already using parent interface bond0" 
time="2017-08-08T10:24:02.040671280-06:00" level=warning msg="error locating sandbox id ea52458552dd38030fab9124b30372d40ef1871940d78c37cd07dc743c5d53fa: sandbox ea52458552dd38030fab9124b30372d40ef1871940d78c37cd07dc743c5d53fa not found" 
time="2017-08-08T10:24:02.040740253-06:00" level=warning msg="failed to cleanup ipc mounts:\nfailed to umount /var/lib/docker/containers/072375b20f443d7f3843d59459cebc6df451b6aeb81abd3fe121ad7ca59c3023/shm: invalid argument" 
time="2017-08-08T10:25:53.842543439-06:00" level=warning msg="error locating sandbox id ea52458552dd38030fab9124b30372d40ef1871940d78c37cd07dc743c5d53fa: sandbox ea52458552dd38030fab9124b30372d40ef1871940d78c37cd07dc743c5d53fa not found" 
time="2017-08-08T10:25:53.842595917-06:00" level=warning msg="failed to cleanup ipc mounts:\nfailed to umount /var/lib/docker/containers/072375b20f443d7f3843d59459cebc6df451b6aeb81abd3fe121ad7ca59c3023/shm: invalid argument" 

 

what version of unraid are you using?

I am on 6.4.0-rc7a

 

1 hour ago, clowrym said:

I am on 6.4.0-rc7a

 

 

did an update happen at the same time? I know that there is now a drop down menu that you select what network the docker is attaching to on the latest 6.4 rc.

 

I have a dual nic server but only one is connected and I dont have an issue....

I'm not aware of any updates, none to unraid, not sure on the docker as I have it set to auto update. Its been running with no issues with my bonded connection until now. I loose my option to change the IP with the drop down until I turn of bonding. 

userland proxy: listen tcp 0.0.0.0:53: bind: address already in use.

Any body know what could be running on port 53? I cant start pihole because port 53 is in use but I don't have any applications using it.

 

I'm stumped...

 

Edit: You must stop the VM Manager and reboot server.

Edited August 25, 20178 yr by MowMdown

On 17/08/2017 at 9:35 AM, MowMdown said:

userland proxy: listen tcp 0.0.0.0:53: bind: address already in use.

Any body know what could be running on port 53? I cant start pihole because port 53 is in use but I don't have any applications using it.

 

I'm stumped...

 

I'm having the same issue and if I change the port 53 to something else the docker fails.

Sorry for quick reply I'm out and about... Read a few posts back about setting an ip for the docker if clash occurs. Something to do with vm or kvm dnsmasq.. Good luck

Sent from my SM-G935F using Tapatalk

Pihole must be on 53

Sent from my SM-G935F using Tapatalk

On 8/18/2017 at 6:46 AM, docbrown said:

 

I'm having the same issue and if I change the port 53 to something else the docker fails.

 

On 8/18/2017 at 7:04 AM, spants01 said:

Sorry for quick reply I'm out and about... Read a few posts back about setting an ip for the docker if clash occurs. Something to do with vm or kvm dnsmasq.. Good luck

Sent from my SM-G935F using Tapatalk
 

 

The issue is the VM Manager. You must disable it and reboot the server for pihole to work. 

 

I got pihole up and running. Doesn't look like you can run VM's and pihole at the same time.

Edited August 25, 20178 yr by MowMdown

On 8/25/2017 at 3:19 PM, MowMdown said:

 

 

The issue is the VM Manager. You must disable it and reboot the server for pihole to work. 

 

I got pihole up and running. Doesn't look like you can run VM's and pihole at the same time.

As long as you're bonding to a bridge, and have a DHCP on your network, you can disable dnsmasq in libvirtd for VMs so it won't bind to port 53:

virsh net-autostart --disable default
virsh net-destroy default

Hope that helps
 

A few pages back was the detail on how to give the pihole docker its own ip to get around this issue. It is strange that I don't have the problem even with vms and kvm enabled

Sent from my SM-G935F using Tapatalk

3 hours ago, spants01 said:

A few pages back was the detail on how to give the pihole docker its own ip to get around this issue. It is strange that I don't have the problem even with vms and kvm enabled

Sent from my SM-G935F using Tapatalk
 

 

I'll need to play around with it more. I wasn't really planning on running VMs anyways but it would be nice to have the option to do both in the future.

 

I'm very green when it comes to networking of any kind, so I don't venture very far into that subject.  Pi-Hole has been working pretty good though, with the exception of Video Ads in YouTube and other Video Providers.

5 hours ago, MowMdown said:

 Pi-Hole has been working pretty good though, with the exception of Video Ads in YouTube and other Video Providers.

 

Not tried it, but: https://discourse.pi-hole.net/t/how-do-i-block-ads-on-youtube/253

Next version of unraid will support separate ip for each docker and will solve that problem?

12 hours ago, etsi said:

Next version of unraid will support separate ip for each docker and will solve that problem?

 

I believe that you can do this with 6.4 but I havent tried it as yet. My system is very stable and I dont want to tweak it whilst I sort out an intermittent network switch problem on my network! 

Can someone tell me the specific URL to add to get Diginc's template loaded to the docker tab?  I was able to run the command via ssh and it just loaded up a broken image and pi-hole that was inaccessible for configuration.  The ssh command was docker pull diginc/pi-hole from https://hub.docker.com/r/diginc/pi-hole/ I keep seeing screenshots of people who are able to edit the variables from template mode but am unsure how to get it to pull in the first place.  I have dug through all 8 pages of this and I cant find an actual step by step install process of this docker image.

 

Template URLs I have tried were

https://github.com/diginc/docker-pi-hole

https://github.com/diginc/

https://hub.docker.com/r/diginc/pi-hole/

 

Thanks!

2 hours ago, Alkali said:

Can someone tell me the specific URL to add to get Diginc's template loaded to the docker tab?  I was able to run the command via ssh and it just loaded up a broken image and pi-hole that was inaccessible for configuration.  The ssh command was docker pull diginc/pi-hole from https://hub.docker.com/r/diginc/pi-hole/ I keep seeing screenshots of people who are able to edit the variables from template mode but am unsure how to get it to pull in the first place.  I have dug through all 8 pages of this and I cant find an actual step by step install process of this docker image.

 

Template URLs I have tried were

https://github.com/diginc/docker-pi-hole

https://github.com/diginc/

https://hub.docker.com/r/diginc/pi-hole/

 

Thanks!

 

What are you trying to do? My template just is a loader for the diginc docker.... no changes are made

The URL is:

https://hub.docker.com/r/diginc/pi-hole

 

But just use my template!

 

EDIT: you do have the Community Applications plugin installed, do you?

Edited August 31, 20178 yr by spants

I did not!  That seems to be the missing link for me.  Thank you so much for the assistance!