Tergo247 Posted July 7, 2019 Share Posted July 7, 2019 Hey Guys, I've been using this container for some time now and have a pretty sizable media library, so thanks for your efforts. Recently however, I've lost my ability to rip discs. The hard stop seems to be that it doesn't recognize my fairly new optical drive with the auto ripper (nothing shows up) and in the GUI (says no optical drives), despite this being in the log on start up: Registration key already up-to-date. [cont-init.d] 90-makemkv.sh: exited 0. [cont-init.d] 95-check-optical-drive.sh: executing... [cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives... [cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg3], group 19. [cont-init.d] 95-check-optical-drive.sh: exited 0. [cont-init.d] 96-install-autodiscripper-srv.sh: executing... [cont-init.d] 96-install-autodiscripper-srv.sh: installing automatic disc ripper service... [cont-init.d] 96-install-autodiscripper-srv.sh: exited 0. Now there are tons of errors related to fontconfigs that I assume are unrelated as I have been ripping despite them without issue until now. Thanks for any help you can provide. Quote Link to comment
Djoss Posted July 8, 2019 Author Share Posted July 8, 2019 15 hours ago, Tergo247 said: Hey Guys, I've been using this container for some time now and have a pretty sizable media library, so thanks for your efforts. Recently however, I've lost my ability to rip discs. The hard stop seems to be that it doesn't recognize my fairly new optical drive with the auto ripper (nothing shows up) and in the GUI (says no optical drives), despite this being in the log on start up: Registration key already up-to-date. [cont-init.d] 90-makemkv.sh: exited 0. [cont-init.d] 95-check-optical-drive.sh: executing... [cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives... [cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg3], group 19. [cont-init.d] 95-check-optical-drive.sh: exited 0. [cont-init.d] 96-install-autodiscripper-srv.sh: executing... [cont-init.d] 96-install-autodiscripper-srv.sh: installing automatic disc ripper service... [cont-init.d] 96-install-autodiscripper-srv.sh: exited 0. Now there are tons of errors related to fontconfigs that I assume are unrelated as I have been ripping despite them without issue until now. Thanks for any help you can provide. This same drive was recognized in the past? Quote Link to comment
Tergo247 Posted July 8, 2019 Share Posted July 8, 2019 17 minutes ago, Djoss said: This same drive was recognized in the past? Yes, I've ripped in something to the tune of 50 discs with it. Quote Link to comment
Djoss Posted July 10, 2019 Author Share Posted July 10, 2019 On 7/7/2019 at 9:15 PM, Tergo247 said: Yes, I've ripped in something to the tune of 50 discs with it. Could you provide the output of the following commands: docker exec MakeMKV lsscsi -g -k docker exec MakeMKV env HOME=/config s6-applyuidgid -u 99 -g 100 -G 19 /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 Quote Link to comment
Tergo247 Posted July 10, 2019 Share Posted July 10, 2019 root@GowingNAS:~# docker exec MakeMKV lsscsi -g -k [0:0:0:0] disk SanDisk Cruzer Fit 1.00 /dev/sda /dev/sg0 [1:0:0:0] disk ATA WDC WD40EFRX-68N 0A82 /dev/sdb /dev/sg1 [2:0:0:0] disk ATA WDC WD40EFRX-68N 0A82 /dev/sdc /dev/sg2 [3:0:0:0] cd/dvd ASUS BC-12B1ST b 3.00 /dev/sr0 /dev/sg3 [4:0:0:0] disk ATA Samsung SSD 840 4B0Q /dev/sdd /dev/sg4 root@GowingNAS:~# docker exec MakeMKV env HOME=/config s6-applyuidgid -u 99 -g 100 -G 19 /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 MSG:1005,0,1,"MakeMKV v1.14.4 linux(x64-release) started","%1 started","MakeMKV v1.14.4 linux(x64-release)" MSG:5042,0,0,"The program can't find any usable optical drives.","The program can't find any usable optical drives." DRV:0,256,999,0,"","","" DRV:1,256,999,0,"","","" DRV:2,256,999,0,"","","" DRV:3,256,999,0,"","","" DRV:4,256,999,0,"","","" DRV:5,256,999,0,"","","" DRV:6,256,999,0,"","","" DRV:7,256,999,0,"","","" DRV:8,256,999,0,"","","" DRV:9,256,999,0,"","","" DRV:10,256,999,0,"","","" DRV:11,256,999,0,"","","" DRV:12,256,999,0,"","","" DRV:13,256,999,0,"","","" DRV:14,256,999,0,"","","" DRV:15,256,999,0,"","","" MSG:5010,0,0,"Failed to open disc","Failed to open disc" Here's what I got. I ordered an external 5.25 enclosure. I'll be able to test the drive on another computer when it arrives. Quote Link to comment
Djoss Posted July 11, 2019 Author Share Posted July 11, 2019 22 hours ago, Tergo247 said: root@GowingNAS:~# docker exec MakeMKV lsscsi -g -k [0:0:0:0] disk SanDisk Cruzer Fit 1.00 /dev/sda /dev/sg0 [1:0:0:0] disk ATA WDC WD40EFRX-68N 0A82 /dev/sdb /dev/sg1 [2:0:0:0] disk ATA WDC WD40EFRX-68N 0A82 /dev/sdc /dev/sg2 [3:0:0:0] cd/dvd ASUS BC-12B1ST b 3.00 /dev/sr0 /dev/sg3 [4:0:0:0] disk ATA Samsung SSD 840 4B0Q /dev/sdd /dev/sg4 root@GowingNAS:~# docker exec MakeMKV env HOME=/config s6-applyuidgid -u 99 -g 100 -G 19 /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 MSG:1005,0,1,"MakeMKV v1.14.4 linux(x64-release) started","%1 started","MakeMKV v1.14.4 linux(x64-release)" MSG:5042,0,0,"The program can't find any usable optical drives.","The program can't find any usable optical drives." DRV:0,256,999,0,"","","" DRV:1,256,999,0,"","","" DRV:2,256,999,0,"","","" DRV:3,256,999,0,"","","" DRV:4,256,999,0,"","","" DRV:5,256,999,0,"","","" DRV:6,256,999,0,"","","" DRV:7,256,999,0,"","","" DRV:8,256,999,0,"","","" DRV:9,256,999,0,"","","" DRV:10,256,999,0,"","","" DRV:11,256,999,0,"","","" DRV:12,256,999,0,"","","" DRV:13,256,999,0,"","","" DRV:14,256,999,0,"","","" DRV:15,256,999,0,"","","" MSG:5010,0,0,"Failed to open disc","Failed to open disc" Here's what I got. I ordered an external 5.25 enclosure. I'll be able to test the drive on another computer when it arrives. Could you also provide the output of: ls -l /dev/sr0 /dev/sg3 Do you know if the problem started after an updated version of MakeMKV ? Quote Link to comment
thorkull Posted July 19, 2019 Share Posted July 19, 2019 Hey guys I'm having a problem where, when I start the MakeMKV docker, several of my CPU threads go to 100%. This is on unraid 6.7.2 and wasn't happening before. Latest versions of community applications and MakeMKV. Also have Plex and Handbrake dockers. Any ideas? Quote Link to comment
Djoss Posted July 21, 2019 Author Share Posted July 21, 2019 On 7/19/2019 at 1:57 PM, thorkull said: Hey guys I'm having a problem where, when I start the MakeMKV docker, several of my CPU threads go to 100%. This is on unraid 6.7.2 and wasn't happening before. Latest versions of community applications and MakeMKV. Also have Plex and Handbrake dockers. Any ideas? Does MakeMKV is ripping a disc? Quote Link to comment
thorkull Posted July 21, 2019 Share Posted July 21, 2019 18 hours ago, Djoss said: Does MakeMKV is ripping a disc? No, just starting the Docker is enough to cause this to happen. Quote Link to comment
Djoss Posted July 22, 2019 Author Share Posted July 22, 2019 5 hours ago, thorkull said: No, just starting the Docker is enough to cause this to happen. You can try to run "htop" to see which process is using the cpu. Quote Link to comment
thorkull Posted July 25, 2019 Share Posted July 25, 2019 On 7/21/2019 at 7:23 PM, Djoss said: You can try to run "htop" to see which process is using the cpu. 1 [| 0.7%] 5 [ 0.0%] 2 [| 0.7%] 6 [ 0.0%] 3 [| 0.7%] 7 [ 0.0%] 4 [ 0.0%] 8 [ 0.0%] Mem[||||||||||||||||||||||||||||||||||||||||||||||||||||| 1.69G/31.4G] Tasks: 89, 179 thr; 2 running Swp[ 0K/0K] Load average: 5.27 4.97 3.58 Uptime: 6 days, 00:19:12 PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 9412 root 20 0 6364 4468 3100 R 0.7 0.0 0:09.21 htop 3310 root 20 0 1090M 58452 35252 S 0.7 0.2 19:31.76 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 2997 nobody 20 0 146M 8480 3980 S 0.7 0.0 1:31.73 nginx: worker process 20334 root 20 0 111M 13384 7840 S 0.7 0.0 0:00.06 php-fpm: pool www 3325 root 20 0 1090M 58452 35252 S 0.7 0.2 0:38.14 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 16951 root 20 0 603M 29588 21656 S 0.7 0.1 0:37.50 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 11372 nobody 20 0 290M 42356 31744 S 0.0 0.1 0:02.96 /opt/makemkv/bin makemkv 20307 root 20 0 111M 13388 7840 S 0.0 0.0 0:00.07 php-fpm: pool www 4277 nobody 35 15 1666M 53828 10396 S 0.0 0.2 2:05.64 Plex Plug-in [com.plexapp.system] /usr/lib/plexmediaserver/Resources/Plug-ins-ad17d5f9e/Framework.bundle/Conte 4122 nobody 20 0 2227M 175M 38540 S 0.0 0.5 15:31.46 /usr/lib/plexmediaserver/Plex Media Server 3329 root 20 0 603M 29588 21656 S 0.0 0.1 15:36.14 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 3350 root 20 0 1090M 58452 35252 S 0.0 0.2 0:57.34 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 4304 nobody 20 0 2386M 605M 19044 S 0.0 1.9 22:41.17 /usr/lib/plexmediaserver/Plex DLNA Server 2993 root 20 0 13272 4308 3240 S 0.0 0.0 12:49.19 ttyd -d 0 -i /var/run/ttyd.sock login -f root 11363 root 20 0 19412 7684 3132 S 0.0 0.0 0:01.14 /usr/bin/x11vnc -display :0 -rfbport 5900 -rfbportv6 -1 -no6 -noipv6 -httpportv6 -1 -forever -desktop MakeMKV 11399 nobody 20 0 521M 11464 9408 S 0.0 0.0 0:01.16 /opt/makemkv/bin/makemkvcon guiserver G0012 4512 nobody 20 0 2386M 605M 19044 S 0.0 1.9 2:13.55 /usr/lib/plexmediaserver/Plex DLNA Server 3803 nobody 20 0 2386M 605M 19044 S 0.0 1.9 3:27.77 /usr/lib/plexmediaserver/Plex DLNA Server 32558 nobody 20 0 1666M 53828 10396 S 0.0 0.2 0:03.78 Plex Plug-in [com.plexapp.system] /usr/lib/plexmediaserver/Resources/Plug-ins-ad17d5f9e/Framework.bundle/Conte 3346 root 20 0 603M 29588 21656 S 0.0 0.1 0:47.32 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 3345 root 20 0 603M 29588 21656 S 0.0 0.1 0:48.73 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 4151 nobody 35 15 1666M 53828 10396 S 0.0 0.2 8:14.22 Plex Plug-in [com.plexapp.system] /usr/lib/plexmediaserver/Resources/Plug-ins-ad17d5f9e/Framework.bundle/Conte 4432 nobody 20 0 2386M 605M 19044 S 0.0 1.9 0:03.96 /usr/lib/plexmediaserver/Plex DLNA Server 4123 nobody 20 0 2227M 175M 38540 S 0.0 0.5 0:36.17 /usr/lib/plexmediaserver/Plex Media Server 3324 root 20 0 1090M 58452 35252 S 0.0 0.2 1:01.52 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 4494 nobody 20 0 2386M 605M 19044 S 0.0 1.9 0:02.92 /usr/lib/plexmediaserver/Plex DLNA Server 4282 nobody 20 0 2227M 175M 38540 S 0.0 0.5 2:30.99 /usr/lib/plexmediaserver/Plex Media Server 11398 nobody 20 0 521M 11464 9408 S 0.0 0.0 0:01.31 /opt/makemkv/bin/makemkvcon guiserver G0012 3328 root 20 0 1090M 58452 35252 S 0.0 0.2 1:02.94 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 14723 root 20 0 1090M 58452 35252 S 0.0 0.2 0:58.13 /usr/bin/dockerd -p /var/run/dockerd.pid --storage-driver=btrfs --log-level=error 3338 root 20 0 603M 29588 21656 S 0.0 0.1 0:41.69 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 11640 root 20 0 603M 29588 21656 S 0.0 0.1 0:48.19 containerd --config /var/run/docker/containerd/containerd.toml --log-level error 4507 nobody 20 0 2386M 605M 19044 S 0.0 1.9 2:13.35 /usr/lib/plexmediaserver/Plex DLNA Server Note that the above doesn't match the GUI: Quote Link to comment
Djoss Posted July 26, 2019 Author Share Posted July 26, 2019 Is the UI always showing 100% ? Or it's only spikes? Quote Link to comment
Typhoon Posted July 31, 2019 Share Posted July 31, 2019 Hi guys. Does anybody know how to fix the 'your application has temporarily expired' issue? This is the first time I have seen it. It asks about a beta registration key or something. Thanks! Quote Link to comment
Djoss Posted August 1, 2019 Author Share Posted August 1, 2019 21 hours ago, Typhoon said: Hi guys. Does anybody know how to fix the 'your application has temporarily expired' issue? This is the first time I have seen it. It asks about a beta registration key or something. Thanks! The beta key you had probably expired. Try to restart the container to get the latest one. Quote Link to comment
NPSF3000 Posted August 28, 2019 Share Posted August 28, 2019 Hi Djoss, Similar issue to what Tergo247 faced, albeit this is my first time running unraid/makemkv. root@Tower:~# docker exec MakeMKV lsscsi -g -k ... [6:0:0:0] cd/dvd ASUS BW-16D1HT 3.10 /dev/sr0 /dev/sg3 ... root@Tower:~# docker exec MakeMKV env HOME=/config s6-applyuidgid -u 99 -g 100 -G 19 /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 MSG:1005,0,1,"MakeMKV v1.14.4 linux(x64-release) started","%1 started","MakeMKV v1.14.4 linux(x64-release)" MSG:5042,0,0,"The program can't find any usable optical drives.","The program can't find any usable optical drives." DRV:0,256,999,0,"","","" DRV:1,256,999,0,"","","" DRV:2,256,999,0,"","","" DRV:3,256,999,0,"","","" DRV:4,256,999,0,"","","" DRV:5,256,999,0,"","","" DRV:6,256,999,0,"","","" DRV:7,256,999,0,"","","" DRV:8,256,999,0,"","","" DRV:9,256,999,0,"","","" DRV:10,256,999,0,"","","" DRV:11,256,999,0,"","","" DRV:12,256,999,0,"","","" DRV:13,256,999,0,"","","" DRV:14,256,999,0,"","","" DRV:15,256,999,0,"","","" MSG:5010,0,0,"Failed to open disc","Failed to open disc" TCOUNT:0 root@Tower:~# ls -l /dev/sr0 /dev/sg3 crw-rw---- 1 root root 21, 3 Aug 27 19:33 /dev/sg3 brw-rw---- 1 root cdrom 11, 0 Aug 27 19:54 /dev/sr0 Quote Link to comment
Taddeusz Posted September 1, 2019 Share Posted September 1, 2019 This container doesn't seem to be picking up the correct playlists for BD+ titles any more. I see it in the log that it says it's using java in /usr/lib/jvm/jdk/bin/java but when it's done reading it hasn't picked on the main title or anything. Quote Link to comment
Taddeusz Posted September 1, 2019 Share Posted September 1, 2019 I just popped the same disc in my Windows box and made sure Java 8 was installed and it picked up the main title like it should. Quote Link to comment
NPSF3000 Posted September 2, 2019 Share Posted September 2, 2019 Physically reinstalled the Bluray drive (different sata port etc) and now it seems to work. Went from sr0 | sg3 to sr0 | sg1. root@Tower:~# docker exec MakeMKV lsscsi -g -k ... [2:0:0:0] cd/dvd ASUS BW-16D1HT 3.10 /dev/sr0 /dev/sg1 ... root@Tower:~# docker exec MakeMKV env HOME=/config s6-applyuidgid -u 99 -g 100 -G 19 /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 MSG:1005,0,1,"MakeMKV v1.14.4 linux(x64-release) started","%1 started","MakeMKV v1.14.4 linux(x64-release)" DRV:0,1,999,0,"BD-RE ASUS BW-16D1HT 3.10","","/dev/sr0" DRV:1,256,999,0,"","","" DRV:2,256,999,0,"","","" DRV:3,256,999,0,"","","" DRV:4,256,999,0,"","","" DRV:5,256,999,0,"","","" DRV:6,256,999,0,"","","" DRV:7,256,999,0,"","","" DRV:8,256,999,0,"","","" DRV:9,256,999,0,"","","" DRV:10,256,999,0,"","","" DRV:11,256,999,0,"","","" DRV:12,256,999,0,"","","" DRV:13,256,999,0,"","","" DRV:14,256,999,0,"","","" DRV:15,256,999,0,"","","" MSG:5010,0,0,"Failed to open disc","Failed to open disc" TCOUNT:0 root@Tower:~# ls -l /dev/sr0 /dev/sg1 crw-rw---- 1 root cdrom 21, 1 Sep 2 14:23 /dev/sg1 brw-rw---- 1 root cdrom 11, 0 Sep 2 15:18 /dev/sr0 Quote Link to comment
Djoss Posted September 3, 2019 Author Share Posted September 3, 2019 On 9/1/2019 at 6:56 PM, Taddeusz said: This container doesn't seem to be picking up the correct playlists for BD+ titles any more. I see it in the log that it says it's using java in /usr/lib/jvm/jdk/bin/java but when it's done reading it hasn't picked on the main title or anything. This is a known issue. I've been in talk with the developper of MakeMKV but didn't get a solution yet. Quote Link to comment
dave Posted September 4, 2019 Share Posted September 4, 2019 Is there a workaround for the fontconfig errors with this container? I see the latest commit on the GitHub addresses it but there has not been a new version released yet to include the change. This is what I am seeing in the log; Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 4: unknown element "its:rules" Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 5: unknown element "its:translateRule" Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'translate' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'selector' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'xmlns:its' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'version' Fontconfig error: Cannot load default config file Quote Link to comment
Djoss Posted September 4, 2019 Author Share Posted September 4, 2019 14 hours ago, dave said: Is there a workaround for the fontconfig errors with this container? I see the latest commit on the GitHub addresses it but there has not been a new version released yet to include the change. This is what I am seeing in the log; Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 4: unknown element "its:rules" Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 5: unknown element "its:translateRule" Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'translate' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'selector' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'xmlns:its' Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'version' Fontconfig error: Cannot load default config file These errors are harmless. However, a new release should be done soon, so the fix for this will be included. Quote Link to comment
Taddeusz Posted September 8, 2019 Share Posted September 8, 2019 @Djoss I use the RealVNC VNC Viewer on my Mac and iOS devices and it's always complaining about unencrypted connections so I was playing around with enabling the secure feature on your containers. It appears that RealVNC uses their own type of encryption and is not compatible with SSL/TLS type encryption? Quote Link to comment
Djoss Posted September 9, 2019 Author Share Posted September 9, 2019 15 hours ago, Taddeusz said: @Djoss I use the RealVNC VNC Viewer on my Mac and iOS devices and it's always complaining about unencrypted connections so I was playing around with enabling the secure feature on your containers. It appears that RealVNC uses their own type of encryption and is not compatible with SSL/TLS type encryption? Correct. SSVNC is a VNC viewer that works, but to my knowledge it's Windows/Linux only. https://github.com/jlesage/docker-makemkv#ssvnc Quote Link to comment
hocky Posted September 21, 2019 Share Posted September 21, 2019 Hi, just updated the docker and now i only get a black screen when opening the WebUI. Before the update, it worked well for quite some months now. Any idea? Quote Link to comment
Djoss Posted September 22, 2019 Author Share Posted September 22, 2019 On 9/21/2019 at 4:18 AM, hocky said: Hi, just updated the docker and now i only get a black screen when opening the WebUI. Before the update, it worked well for quite some months now. Any idea? I don't have the issue on my side... Can you provide the output of: find /mnt/user/appdata/MakeMKV Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.