gacpac Posted April 26, 2019 Share Posted April 26, 2019 Hi, I'm trying to use the fog project container and it doesn't have a webui tab, that I know I can set in the settings but it's not picking up. Am I Missing something? There's no forum set for fogproject yet but I figure this shouldn't be really complicated to set manually Quote Link to comment
itimpi Posted April 26, 2019 Share Posted April 26, 2019 Are you sure that the container has been built to expect its GUI to be exposed on port 80? What type of networking have you set up for the container (host/bridged/custom). If have set the networking to host have you set up any port mapping to avoid clashing with Unraid's use of Port 80 for its own GUI? Quote Link to comment
gacpac Posted April 26, 2019 Author Share Posted April 26, 2019 the docker works fine using port 80 and I have set it to use custom in br0. So it's not a problem at all. It's running fine, I'm just wondering why the WebUI option doesn't show. Quote Link to comment
itimpi Posted April 26, 2019 Share Posted April 26, 2019 7 minutes ago, gacpac said: the docker works fine using port 80 and I have set it to use custom in br0. So it's not a problem at all. It's running fine, I'm just wondering why the WebUI option doesn't show. No idea then, it looks like you have done everything correctly just a thought though - did you copy/paste when setting up the entry? If so it might be worth deleting the entry and typing it in manually as copy/paste has been known to insert hidden characters which can upset things. Quote Link to comment
gacpac Posted April 26, 2019 Author Share Posted April 26, 2019 Right This is one of the things that I'll just let it be. Until the forum is opened by the developer. I wouldn't mind being a tester for this kind of stuff. I think is @Mudislander as it says in the docker settings. Quote Link to comment
bonienl Posted April 26, 2019 Share Posted April 26, 2019 1 hour ago, gacpac said: I'm just wondering why the WebUI option doesn't show. This option only shows when the "WebUI" field is filled in (see advanced view). Content should look like http://[IP]:[PORT:80]/ Quote Link to comment
gacpac Posted April 26, 2019 Author Share Posted April 26, 2019 This option only shows when the "WebUI" field is filled in (see advanced view). Content should look likehttp://[iP]:[PORT:80]/ And it is [emoji26] that's why it doesn't make sense. Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
Squid Posted April 26, 2019 Share Posted April 26, 2019 You could always remove the container, then Apps, Previous Apps, Reinstall it and enter in the UI before hitting apply. Quote Link to comment
gacpac Posted April 27, 2019 Author Share Posted April 27, 2019 You could always remove the container, then Apps, Previous Apps, Reinstall it and enter in the UI before hitting apply.And I just did and still nothing. FYI. I'm using the latest 6.7.0rc7Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
Squid Posted April 27, 2019 Share Posted April 27, 2019 1 hour ago, gacpac said: And I just did and still nothing. FYI. I'm using the latest 6.7.0rc7 Sent from my Pixel 2 XL using Tapatalk post /config/plugins/dockerMan/templates-user/fogproject.xml from the flash drive Quote Link to comment
gacpac Posted April 27, 2019 Author Share Posted April 27, 2019 11 hours ago, Squid said: post /config/plugins/dockerMan/templates-user/fogproject.xml from the flash drive Here it is. Check my-fogproject.xml Quote Link to comment
Squid Posted April 27, 2019 Share Posted April 27, 2019 I suspect its something with the build of the container itself. Not quite sure. It will work if you switch to bridge mode. But, you will run into trouble though with not giving the container a static IP address on br0. You are relying upon DHCP to always assign it the same IP, and that is not guaranteed to ever happen. Quote Link to comment
gacpac Posted April 27, 2019 Author Share Posted April 27, 2019 I suspect its something with the build of the container itself. Not quite sure. It will work if you switch to bridge mode. But, you will run into trouble though with not giving the container a static IP address on br0. You are relying upon DHCP to always assign it the same IP, and that is not guaranteed to ever happen.That's the same I'm thinking. I was able to do bridge, but then nothing on the container works. I need to remap all the ports, but docker is supposed to hit the network to image or clone computers. Not sure I can make it work but well.I'm in for a Ride. If I get it working I'll reply back or try to message the developer. Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
gansuk Posted February 22, 2020 Share Posted February 22, 2020 i know this is late but im also having the same issue and its somthing todo with the custom network setting if i use bridge\host it works fine but the webui link gets removed with custom (br0) this seems like a bug that unraid needs to fix Quote Link to comment
trurl Posted February 22, 2020 Share Posted February 22, 2020 1 hour ago, gansuk said: i know this is late Probably not even the same version of Unraid. You will have to give a lot more information if you want help. Quote Link to comment
gansuk Posted February 22, 2020 Share Posted February 22, 2020 im using the latest stable version 6.8.2 and this has been an issue with any docker container that has webui link if there is a way to fix this it would be nice as having a diff ip for each docker container is nice and a simple url link getting removed is just annoying but its not a huge deal to get around Quote Link to comment
Squid Posted February 22, 2020 Share Posted February 22, 2020 I just switched one of my containers from host to a static IP on br0 and the webUI still worked and was populated properly. Probably would be worthwhile to post an applicable xml from /config/plugins/dockerMan/templates-user Quote Link to comment
halorrr Posted March 18, 2020 Share Posted March 18, 2020 On 2/22/2020 at 3:53 PM, Squid said: I just switched one of my containers from host to a static IP on br0 and the webUI still worked and was populated properly. Probably would be worthwhile to post an applicable xml from /config/plugins/dockerMan/templates-user I'm having the same thing with the HOOBS container. If I use Bridge or Host the WebUI option shows up, as soon as I switch to br0 (which I need to do for the container to work for me) the option disappears. I'm curious if you test on that docker if you can replicate the behaviour as well or if it works as intended for you. It seems to be container specific (I have no idea why) but the WebUi doesn't disappear if I use br0 on the linuxserver plex docker as an example. Here is an applicable XML for my HOOBS one: my-HOOBS.xml Quote Link to comment
hdlineage Posted December 27, 2020 Share Posted December 27, 2020 I think I know exactly what is happening here. If there is no port mapping that binds from the container to host, the web ui link doesn't show. I have a custom bridge network that doesn't require port mapping, and WEB UI link doesn't show no matter what I put in the WEBUI field. As soon as I map even one port to host the webui appears. It's kind of annoying, is there a way to force WEB UI link setting? Quote Link to comment
coldtech Posted January 3, 2021 Share Posted January 3, 2021 Same issue here. Unfortunately, I can not even map ports (at least not through the GUI). I have some port mappings set, but when hitting "apply" they are not even included in the command being executed to start the container. As soon as I use bridge networking, everything works. I need to listen for multicast packets on a specific interface though, so I need to use br2 (in my case). Unless anyone has another solution? Quote Link to comment
casperse Posted January 10, 2021 Share Posted January 10, 2021 On 3/18/2020 at 7:34 AM, halorrr said: I'm having the same thing with the HOOBS container. If I use Bridge or Host the WebUI option shows up, as soon as I switch to br0 (which I need to do for the container to work for me) the option disappears. I'm curious if you test on that docker if you can replicate the behaviour as well or if it works as intended for you. It seems to be container specific (I have no idea why) but the WebUi doesn't disappear if I use br0 on the linuxserver plex docker as an example. Here is an applicable XML for my HOOBS one: my-HOOBS.xml 4.21 kB · 4 downloads Did you find a solution to the HOOBS problem? I am struggling with the same problem: https://forums.unraid.net/topic/89206-support-malvarez00-hoobs/?do=findComment&comment=933413 Quote Link to comment
halorrr Posted February 15, 2021 Share Posted February 15, 2021 On 1/9/2021 at 7:48 PM, casperse said: Did you find a solution to the HOOBS problem? I am struggling with the same problem: https://forums.unraid.net/topic/89206-support-malvarez00-hoobs/?do=findComment&comment=933413 Nope no luck Quote Link to comment
benfishbus Posted February 21, 2021 Share Posted February 21, 2021 On 12/27/2020 at 4:59 PM, hdlineage said: I think I know exactly what is happening here. If there is no port mapping that binds from the container to host, the web ui link doesn't show. I have a custom bridge network that doesn't require port mapping, and WEB UI link doesn't show no matter what I put in the WEBUI field. As soon as I map even one port to host the webui appears. It's kind of annoying, is there a way to force WEB UI link setting? Yep, I have the same problem. Quote Link to comment
Urban Posted March 21, 2021 Share Posted March 21, 2021 Yes this has been the case from at least 6.8 through to the current 6.9.1. If you change the network type to "none" and then add "--net=container:<ContainerName>" to extra parameters in order to route it though a different container it removes the "WebUI" option from the context menu. Everything else works fine but its just incredibly annoying accessing containers setup this way. Quote Link to comment
JohnStainsby Posted May 5, 2021 Share Posted May 5, 2021 You can force the WebUI option to appear by adding a port parameter e.g. -p '80:80/tcp' to the extra parameters field in advanced settings. Just put in whatever port the container's webui is using. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.