HaveAGitGat Posted February 17, 2020 Author Share Posted February 17, 2020 On 2/16/2020 at 5:20 AM, mwells said: First off thank you. I just started using this container and I like all the options you have to control your media files. I'm having an issue with the container not using the PUID:99 and PGID: 100 defined in the template. When the container writes any file it does so as root. Most of the containers when the PUID and PGID are set it uses this when writing files created. Can you please change the container to use these settings? I don't want my media files created as root that are output from this container. Anyone else having this issue? I thought I might have setup something incorrectly, but everything else is working fine. Only issue is the files are being created with the wrong owner. Thanks Ok I'll have a look at the Docker settings. Quote Link to comment
HaveAGitGat Posted February 17, 2020 Author Share Posted February 17, 2020 10 hours ago, cryzis said: Need a little plugin help. I want a plugin that searches all audio streams for an AC3 5.1 audio track, it will then set that stream to the "default" audio stream. Any ideas? There's not a plugin which doesn that at the moment but can add it to the to-do list. Quote Link to comment
caplam Posted February 17, 2020 Share Posted February 17, 2020 (edited) Hello, i've just installed the container and i'm trying to understand how it works. My purpose is to reencode all my video fileswhich are not in hevc in hevc and let audio and subtitles streams untouched (passtrough) I created my first library. It's a movie one which was reencoded last mont with unmanic. As i don't want to break my library i first run health check with 4 workers. it was ok. For the setup of the library : source : ok the folder is correctly mapped and i can select the movie subfolder transcode cache : i selected /tmp/Tdarr for mapping : the cache folder will be in ram (i have plenty) output folder: i let it untouched. In my understanding it means transcoded files will overwrite original ones. containers : i removed m2ts from the list : in a bluray there are hundreds of m2ts i don't want to convert it all. transcode : i checked plugin stack i checked Tdarr_Plugin_lmg1_Reorder_Streams to have streams in correct order i checked Tdarr_Plugin_075a_FFMPEG_HEVC_Generic as i want only video encoding of non hevc files. Then i checked process library and run scan (new). I then select 1 transcode worker. I had a bug as 3 transcode worker were started. i killed 2; 1 is enough to see result. Waiting to see the result. For now i have a concern. The library has been scanned with 462 files. 7 are h264 videos and 455 are h265. Despite the transcode settings 205 files have been queued for encoding: why not only 7 ? In the search tab why i search for h264 it finds 9 files. It clearly indicates that 2 are hevc. When i look at the queue i see hevc files but i shouldn't. Do you know what might be the problem? When i click on skip in the queue it indicates transcode success. The files which were not in the queue are marked "not required". Edit: 30 minutes after the beginning tdarr deleted the 199 h264 files in the queue and marked them as transcode not required. I don't know why exactly. Edited February 17, 2020 by caplam Quote Link to comment
letrain Posted February 17, 2020 Share Posted February 17, 2020 (edited) If this has already been asked, i am sorry. i did search but couldn't find an answer. Is it possible to passthrough the same GPU to Tdarr and Plex? and have it used at the same time? Edited February 17, 2020 by letrain Quote Link to comment
caplam Posted February 17, 2020 Share Posted February 17, 2020 i added tvshow library and all files went in queue. I have a third already in hevc. I guess i have to wait before there are marked as transcoded not required? Quote Link to comment
cryzis Posted February 17, 2020 Share Posted February 17, 2020 15 hours ago, HaveAGitGat said: There's not a plugin which doesn that at the moment but can add it to the to-do list. That would be great! For context this is ideal when someone wants a certain track as the default for their players, in my case I need the 5.1 AC3 channel as the default, but I want to keep the existing audio streams for other systems. Quote Link to comment
caplam Posted February 18, 2020 Share Posted February 18, 2020 After the night it seems to run quite well. Like unmanic it transcode almost 4 files at a time in an hour with the cpu. I have around 3000 files left to transcode which should take around 4 months. I'm looking a gpu (for now i have an old nvidia quadro 280 which is useless) to accelerate the process. The P400 is not expensive and draw around 30W. It can transcode 2 streams simultanously but i don't know at what speed. The P2000 is more expensive and draw 75W. Do this 2 cards work with tdarr ? What would you choose ? When my library will be transcoded i will not need more than 2 transcodes at a time. Can tdarr transcode 2 files with the gpu and 2 others with the cpu at the same time ? Quote Link to comment
HaveAGitGat Posted February 18, 2020 Author Share Posted February 18, 2020 16 hours ago, caplam said: i added tvshow library and all files went in queue. I have a third already in hevc. I guess i have to wait before there are marked as transcoded not required? Yes eventually all your files should be in transcode success/not required. Quote Link to comment
HaveAGitGat Posted February 18, 2020 Author Share Posted February 18, 2020 16 hours ago, letrain said: If this has already been asked, i am sorry. i did search but couldn't find an answer. Is it possible to passthrough the same GPU to Tdarr and Plex? and have it used at the same time? Yes pretty sure it's possible to do that if you follow the unraid nvenc setup instructions for both containers: unRAID: Enable NVENC: https://forums.unraid.net/topic/77813-plugin-linuxserverio-unraid-nvidia/ Quote Link to comment
HaveAGitGat Posted February 18, 2020 Author Share Posted February 18, 2020 1 hour ago, caplam said: After the night it seems to run quite well. Like unmanic it transcode almost 4 files at a time in an hour with the cpu. I have around 3000 files left to transcode which should take around 4 months. I'm looking a gpu (for now i have an old nvidia quadro 280 which is useless) to accelerate the process. The P400 is not expensive and draw around 30W. It can transcode 2 streams simultanously but i don't know at what speed. The P2000 is more expensive and draw 75W. Do this 2 cards work with tdarr ? What would you choose ? When my library will be transcoded i will not need more than 2 transcodes at a time. Can tdarr transcode 2 files with the gpu and 2 others with the cpu at the same time ? Yes, any card which supports NVENC will work with Tdarr: https://developer.nvidia.com/video-encode-decode-gpu-support-matrix P400 would be fine for me. I use a 1050Ti. Those cards perform the same for transcoding but the P2000 has unlimited concurrent transcodes. NVENC still uses lots of CPU so you probably wouldn't want to use 2 separate transcodes on the CPU. You can do that though. Quote Link to comment
caplam Posted February 18, 2020 Share Posted February 18, 2020 24 minutes ago, HaveAGitGat said: Yes, any card which supports NVENC will work with Tdarr: https://developer.nvidia.com/video-encode-decode-gpu-support-matrix P400 would be fine for me. I use a 1050Ti. Those cards perform the same for transcoding but the P2000 has unlimited concurrent transcodes. NVENC still uses lots of CPU so you probably wouldn't want to use 2 separate transcodes on the CPU. You can do that though. I have an old machine but it can run 4 transcodes with cpu. I have 2x2650V2 with 128Gb ram. I wonder how fast would be a p400 compare to that? Quote Link to comment
letrain Posted February 18, 2020 Share Posted February 18, 2020 Yes pretty sure it's possible to do that if you follow the unraid nvenc setup instructions for both containers: unRAID: Enable NVENC: https://forums.unraid.net/topic/77813-plugin-linuxserverio-unraid-nvidia/Ok. I already have Plex working in docker with hardware transcoding just making sure adding it to both wouldn't crash one or the other. ThanksSent from my Pixel 2 XL using Tapatalk Quote Link to comment
nicksphone Posted February 18, 2020 Share Posted February 18, 2020 (edited) 4 hours ago, caplam said: I have an old machine but it can run 4 transcodes with cpu. I have 2x2650V2 with 128Gb ram. I wonder how fast would be a p400 compare to that? Save your money and get a 1050ti and use the driver mod to let it do more than 2 transcodes. you will run out of cpu before you run out of gpu. i have a 2700x pinned on 6 cores and i get maxed out on the cpu at 6 transcodes i dropped it to 3 so less failed and my system did not lag the gpu was reading 35% usage. it churns through the files fast enough when i was just using 2 GPU encoding is soooooooo much faster than cpu as it uses both. Edited February 18, 2020 by nicksphone spelling Quote Link to comment
cryzis Posted February 18, 2020 Share Posted February 18, 2020 8 hours ago, nicksphone said: Save your money and get a 1050ti and use the driver mod to let it do more than 2 transcodes. you will run out of cpu before you run out of gpu. i have a 2700x pinned on 6 cores and i get maxed out on the cpu at 6 transcodes i dropped it to 3 so less failed and my system did not lag the gpu was reading 35% usage. it churns through the files fast enough when i was just using 2 GPU encoding is soooooooo much faster than cpu as it uses both. This is interesting, I have a p2000 handling 20 HEVC transcodes and my cpu it sitting around 60% with the gpu at 25%, its an intel xeon e3-1240v5 3.5 4core/4ht cores. Quote Link to comment
nicksphone Posted February 19, 2020 Share Posted February 19, 2020 (edited) 18 hours ago, cryzis said: This is interesting, I have a p2000 handling 20 HEVC transcodes and my cpu it sitting around 60% with the gpu at 25%, its an intel xeon e3-1240v5 3.5 4core/4ht cores. That was 4k reencodes i max out the load and stress. With 20 encodes you might want to get some test files made to see the transcode times. I noticed 3 to 4 times longer when in had more transcodes going so your not saving any time and adding more wear on the drives. Edited February 19, 2020 by nicksphone Typo Quote Link to comment
cryzis Posted February 21, 2020 Share Posted February 21, 2020 On 2/19/2020 at 1:21 PM, nicksphone said: That was 4k reencodes i max out the load and stress. With 20 encodes you might want to get some test files made to see the transcode times. I noticed 3 to 4 times longer when in had more transcodes going so your not saving any time and adding more wear on the drives. Good point, I took the workers down to four, seems to be working better overall Quote Link to comment
mwells Posted February 21, 2020 Share Posted February 21, 2020 On 2/18/2020 at 10:48 AM, nicksphone said: Save your money and get a 1050ti and use the driver mod to let it do more than 2 transcodes. you will run out of cpu before you run out of gpu. i have a 2700x pinned on 6 cores and i get maxed out on the cpu at 6 transcodes i dropped it to 3 so less failed and my system did not lag the gpu was reading 35% usage. it churns through the files fast enough when i was just using 2 GPU encoding is soooooooo much faster than cpu as it uses both. I have a 1050ti I use as well. However, what driver mod are you referring to that will allow more then 2 transcodes on the 1050ti? Quote Link to comment
JonathanM Posted February 21, 2020 Share Posted February 21, 2020 1 minute ago, mwells said: However, what driver mod are you referring to that will allow more then 2 transcodes on the 1050ti? That's not to be discussed on this forum. Find the info elsewhere. Quote Link to comment
cryzis Posted February 21, 2020 Share Posted February 21, 2020 (edited) On 2/17/2020 at 2:49 AM, HaveAGitGat said: There's not a plugin which doesn that at the moment but can add it to the to-do list. You could add an option to the "Transcode Audio Stream" generic plugin to set the newly created audio stream as default. I think it would also have to remove default from any other existing streams. This may not be a good fit for that plugin but it was a thought. Edited February 21, 2020 by cryzis Quote Link to comment
propman07 Posted February 21, 2020 Share Posted February 21, 2020 I'm trying to get tdarr configured, but not having much luck. I have edited the container to try to point it to a test folder that I have on the server. Here is my folder structure: /mnt/user/media/movies (movie folder) /mnt/user/media/series (tv shows) /mnt/user/media/tdarr (tdarr test folder) Plan is to copy some movies / tv shows into the tdarr folder for testing purposes. I can start the container, but when I try to browse to the test folder, it keeps telling me that the path is invalid? I tried to add "/" to the folder path, then hit the browse button, but I am only able to get to a folder called media. Not really sure where that is.... I'm having the same trouble setting up the cache folder as well...I thought that was defined in the docker config setting? Thanks. Quote Link to comment
JonathanM Posted February 21, 2020 Share Posted February 21, 2020 44 minutes ago, propman07 said: I'm trying to get tdarr configured, but not having much luck. I have edited the container to try to point it to a test folder that I have on the server. Here is my folder structure: /mnt/user/media/movies (movie folder) /mnt/user/media/series (tv shows) /mnt/user/media/tdarr (tdarr test folder) That's your host paths, what are they mapped to on the container side? 45 minutes ago, propman07 said: I can start the container, but when I try to browse to the test folder, it keeps telling me that the path is invalid? You need to browse to the folders defined for the container half of the docker mapping. Quote Link to comment
propman07 Posted February 23, 2020 Share Posted February 23, 2020 Thanks for the reply. I was able to get tdarr to browse to the correct folder....thanks to you reply...I needed to look to where the docker half of the mapping was pointed to. Now, I need to figure out how to add files for transcoding. Quote Link to comment
caplam Posted February 23, 2020 Share Posted February 23, 2020 For now it's working as intended. I'm waiting for a quadro p400 to accelerate the process. I have a question: how would you do to have tdarr reencode hevc into hevc if the bitrate is higher a certain value. For now it's converting my h264 media files in hevc. I have also some big hevc files and i'd like to have it downsized. For now tdarr doesn't touch hevc files. Quote Link to comment
kri kri Posted February 24, 2020 Share Posted February 24, 2020 Is there a way to prevent this docker from filling up my docker.img? Everything looks fine in my settings that I can tell. My encodes share is a cache-only share. I am using a P2000 nvidia card. Quote Link to comment
nicksphone Posted February 26, 2020 Share Posted February 26, 2020 On 2/24/2020 at 5:20 PM, ice pube said: Is there a way to prevent this docker from filling up my docker.img? Everything looks fine in my settings that I can tell. My encodes share is a cache-only share. I am using a P2000 nvidia card. its using 2.5gigs of the 4 gigs its saved its self i would not worry about it unless your docker.img is on a small cache drive krusadar a simple file manager uses 2.4 gigs of docker space. ive been running it for months and im using 2.5 gigs still. if your running low on docker space change the size a few gigs. if your docker is filling up something else might be the hog. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.