Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array

dlandon · April 4, 2023

4 hours ago, zzgus said:

Any idea why I can't mount disks on a dual usb enclosure?

Both disks have the same mount point name. They need to be unique.

zzgus · April 4, 2023

3 hours ago, dlandon said:

Both disks have the same mount point name. They need to be unique.

Thankyou
Gus

Wiseone001 · April 5, 2023

I know this is most likely a very simple issue but on one of my 3 pro unraid servers, my unassigned devices constantly looking for devices and never populates, on top of that i can not search or connect a remote share... i have matched settings from all 3 systems and just this one does this.

Suggestions? what information can i post that you can use to check it?

ibm3650-diagnostics-20230403-0914.zip

dlandon · April 5, 2023

2 hours ago, Wiseone001 said:

I know this is most likely a very simple issue but on one of my 3 pro unraid servers, my unassigned devices constantly looking for devices and never populates, on top of that i can not search or connect a remote share... i have matched settings from all 3 systems and just this one does this.

Suggestions? what information can i post that you can use to check it?

A couple suggestions:

Remove all the UD disks if possible.
Set the "Debug Log Level" to "Udev and Hotplug", navigate to the UD page for a minute or so, then post new diagnostics. Go back and set the "Debug Log Level" back to none, because the debug messages can be quite chatty.

Wiseone001 · April 6, 2023

5 hours ago, dlandon said:

A couple suggestions:

Remove all the UD disks if possible.

Set the "Debug Log Level" to "Udev and Hotplug", navigate to the UD page for a minute or so, then post new diagnostics. Go back and set the "Debuibm3650-diagnostics-20230405-2051.zipg Log Level" back to none, because the debug messages can be quite chatty.

I removed any unassigned drives and rebooted. i even uninstalled the plugin /deleted the file for unassigned in the config folder and then re-installed.. same thing over and over.

here is the new diag.

dlandon · April 6, 2023

23 minutes ago, Wiseone001 said:

I removed any unassigned drives and rebooted. i even uninstalled the plugin /deleted the file for unassigned in the config folder and then re-installed.. same thing over and over.

here is the new diag.

You have something going on your network:

Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299553,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.122.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299654,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299711,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.31.200.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299763,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.21.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299816,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.20.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299872,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.17.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****

I'm trying to come up with a debug mode so I can find out where UD is getting stuck.

Wiseone001 · April 6, 2023

12 hours ago, dlandon said:

You have something going on your network:

Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299553,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.122.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299654,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299711,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.31.200.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299763,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.21.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299816,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.20.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299872,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.17.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****

I'm trying to come up with a debug mode so I can find out where UD is getting stuck.

i have changed the debug mode to udev and hotplug.. sorry i did not have that set with the other diag.. here is the current one.

ibm3650-diagnostics-20230406-0931.zip

Wiseone001 · April 6, 2023

14 hours ago, dlandon said:

You have something going on your network:

Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299553,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.122.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299654,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299711,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.31.200.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299763,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.21.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299816,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.20.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]: [2023/04/05 20:39:07.299872,  0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2)
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   Samba name server IBM3650 is now a local master browser for workgroup WORKGROUP on subnet 172.17.0.1
Apr  5 20:39:07 IBM3650  nmbd[10786]:   
Apr  5 20:39:07 IBM3650  nmbd[10786]:   *****

I'm trying to come up with a debug mode so I can find out where UD is getting stuck.

Noticed this :

So I stopped the array, added 2 of them as they are similar 1 TB drives to the main array, and created a new pool device which was the 8 Gig USB drive.. now i no longer have any devices that are unassigned but i do not get the option to format the 2 (1TB Drives ) i just added to my main array.. it wants to clear instead.

Another debu/diagnostic for your review.

plus i removed all of the custom docker networks leaving only the default ones..

ibm3650-diagnostics-20230406-1121.zip

itimpi · April 6, 2023

1 hour ago, Wiseone001 said:

but i do not get the option to format the 2 (1TB Drives ) i just added to my main array.. it wants to clear instead.

This is expected! When adding drives to an array the drives first have to be cleared (zeroes written to every sector) so that they do not impact parity. Once that has completed then you will be able to format them (which is very quick).

dlandon · April 6, 2023

7 hours ago, Wiseone001 said:

i have changed the debug mode to udev and hotplug.. sorry i did not have that set with the other diag.. here is the current one.

So through out all your tests, UD is still showing the Unraid wave constantly?

Do you have any remote shares set up or mounted in UD?

Wiseone001 · April 7, 2023

14 hours ago, dlandon said:

So through out all your tests, UD is still showing the Unraid wave constantly?

Do you have any remote shares set up or mounted in UD?

Correct. the status still has not changed, i have 0 remote connections and share set up.. i also removed the 8gig flash drive that was in addition to the Unraid flash drive... also removed the usb plugin's.. i have made drastic changes, removed plugin's and it still gives me the waves.

Wiseone001 · April 7, 2023

17 hours ago, itimpi said:

This is expected! When adding drives to an array the drives first have to be cleared (zeroes written to every sector) so that they do not impact parity. Once that has completed then you will be able to format them (which is very quick).

after the clear you were correct the option to format shows now in the mian window at the bottom where the parity check is listed but because of the unassigned devices plugin not responding i can not format the drives indiviually. so i can not select the individual drive and modify

dlandon · April 7, 2023

4 minutes ago, Wiseone001 said:

Correct. the status still has not changed, i have 0 remote connections and share set up.. i also removed the 8gig flash drive that was in addition to the Unraid flash drive... also removed the usb plugin's.. i have made drastic changes, removed plugin's and it still gives me the waves.

I'm suspecting a php error/warning. Any chance you'd be comfortable updating to 6.12.rc? It has the php logging that might help here.

Wiseone001 · April 7, 2023

Just now, dlandon said:

I'm suspecting a php error/warning. Any chance you'd be comfortable updating to 6.12.rc? It has the php logging that might help here.

I have no issue with that.. however i had attempted to run this and lost access to file manager and reverted this version back but let see what it will do.

stand by I will update and bounce it in a few min

dlandon · April 7, 2023

2 minutes ago, Wiseone001 said:

I have no issue with that.. however i had attempted to run this and lost access to file manager and reverted this version back but let see what it will do.

stand by I will update and bounce it in a few min

Once you upgrade, go to Tools->PHP Settings and "All Categories" for "Error Reporting Level". Then go to the UD page and let it sit for a bit. Then go back to the PHP Settings page and look at the log. Report the errors/warnings back here.

Wiseone001 · April 7, 2023

1 hour ago, dlandon said:

Once you upgrade, go to Tools->PHP Settings and "All Categories" for "Error Reporting Level". Then go to the UD page and let it sit for a bit. Then go back to the PHP Settings page and look at the log. Report the errors/warnings back here.

here is the log which doesnt seem to include unmanaged devices

[07-Apr-2023 08:30:00 America/New_York] PHP Warning: Undefined array key "adminer:latest" in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:30:00 America/New_York] PHP Warning: Trying to access array offset on value of type null in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:30:08 America/New_York] PHP Warning: Undefined array key "adminer:latest" in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:30:08 America/New_York] PHP Warning: Trying to access array offset on value of type null in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:30:35 America/New_York] PHP Warning: Undefined variable $override in /usr/local/emhttp/plugins/ipmi/include/ipmi_check.php on line 4
[07-Apr-2023 08:30:35 America/New_York] PHP Warning: Undefined variable $oboard in /usr/local/emhttp/plugins/ipmi/include/ipmi_check.php on line 4
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 13
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 269
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 274
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 403
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 403
[07-Apr-2023 08:30:38 America/New_York] PHP Deprecated: Using ${var} in strings is deprecated, use {$var} instead in /usr/local/emhttp/plugins/ipmi/scripts/ipmifan on line 403
[07-Apr-2023 08:30:41 America/New_York] PHP Warning: Undefined array key "adminer:latest" in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:30:41 America/New_York] PHP Warning: Trying to access array offset on value of type null in /usr/local/emhttp/plugins/community.applications/include/exec.php on line 2367
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:35:00 America/New_York] PHP Warning: Undefined array key "fsStatus" in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 408
[07-Apr-2023 08:41:02 America/New_York] PHP Warning: Undefined variable $parentPID in /usr/local/emhttp/plugins/ca.backup2/scripts/killRsync.php on line 21
[07-Apr-2023 08:41:30 America/New_York] PHP Warning: Undefined variable $parentPID in /usr/local/emhttp/plugins/ca.backup2/scripts/killRsync.php on line 21
[07-Apr-2023 08:41:32 America/New_York] PHP Warning: Undefined array key "enableTurbo" in /usr/local/emhttp/plugins/ca.mover.tuning/mover.php on line 36
[07-Apr-2023 08:41:32 America/New_York] PHP Warning: Undefined array key "moverNice" in /usr/local/emhttp/plugins/ca.mover.tuning/mover.php on line 42
[07-Apr-2023 08:41:32 America/New_York] PHP Warning: Undefined array key "moverIO" in /usr/local/emhttp/plugins/ca.mover.tuning/mover.php on line 43
[07-Apr-2023 08:41:32 America/New_York] PHP Warning: Undefined array key "logging" in /usr/local/emhttp/plugins/ca.mover.tuning/mover.php on line 12

dlandon · April 7, 2023

8 minutes ago, Wiseone001 said:

here is the log which doesnt seem to include unmanaged devices

Correct, I don't see any UD warnings in the log.

@Squid will have to look at the CA warnings.

Wiseone001 · April 7, 2023

7 minutes ago, dlandon said:

Correct, I don't see any UD warnings in the log.

@Squid will have to look at the CA warnings.

but yet i still cant see anything for unassigned devices and i can not get a remote share connected.... including the latest Diag from right now.. maybe you see something i do not.

IBM3650_Diag.zip

dlandon · April 7, 2023

18 minutes ago, Wiseone001 said:

but yet i still cant see anything for unassigned devices and i can not get a remote share connected.... including the latest Diag from right now.. maybe you see something i do not.

I'll release an update to UD today with some debugging to help find where UD is getting hung.

Wiseone001 · April 7, 2023

15 minutes ago, dlandon said:

I'll release an update to UD today with some debugging to help find where UD is getting hung.

new delema now.... rebooted server and the cache drives names changed and wont start the array, and im not sure how to get the names to match especially without the unassigned devices plugin active for it.. when i went into disks under the plugin it shows nothing for drives and no ability to rename either.

now system down..

image.png.1204060877bd417262b92b4328603ca4.png

Edited April 7, 2023 by Wiseone001

Squid · April 7, 2023

1 hour ago, dlandon said:

@Squid will have to look at the CA warnings.

thx fixed

dlandon · April 7, 2023

3 hours ago, Wiseone001 said:

new delema now.... rebooted server and the cache drives names changed and wont start the array, and im not sure how to get the names to match especially without the unassigned devices plugin active for it.. when i went into disks under the plugin it shows nothing for drives and no ability to rename either.

now system down..

Pool devices are not unassigned devices.

dlandon · April 7, 2023

3 hours ago, Wiseone001 said:

new delema now.... rebooted server and the cache drives names changed and wont start the array, and im not sure how to get the names to match especially without the unassigned devices plugin active for it.. when i went into disks under the plugin it shows nothing for drives and no ability to rename either.

now system down..

Re-assign the disks to the slots. You can figure out which disks go where by the last part of the serial numbers.

JorgeB · April 7, 2023

@Wiseone001do what Dan mentioned but before, unassign all pool devices, start array, stop array, now re-assign all pool devices, if not the red xs will still be there next time.

Wiseone001 · April 7, 2023

3 minutes ago, JorgeB said:

@Wiseone001do what Dan mentioned but before, unassign all pool devices, start array, stop array, now re-assign all pool devices, if not the red xs will still be there next time.

I have the array started again, it was for my cache pool, if i lost it because of name change it would have wiped all the appdata etc..

I was able to get it back by installing another plugin.

Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array

Recommended Posts

Link to comment

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

dlandon

dlandon

dlandon

Posted Images

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Join the conversation