Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Lost entire docker custom vlan definitions after upgrading. Downgrading did not fix the issue. Custom defined VLAN no longer appear in docker network droodown nasvm-diagnostics-20250624_0745.zip
- Closed
- 530 views
-
Unraid 7.1.4 Using Adguard-Home in Docker as a DNS service, using both an IPV4 and IPV6 address Adguard-Home has "192.168.1.1 , 2xxx:1234:1234:1234::1" as addresses (Note that this is not a "fe80:xxxx:xxxx:xxxx:xxxx" "local" iPV6 address but a Global Unicast address beginning with a "2xxx" Assuming we all use IPV6/64, you can translate those addresses to 1234:1234:1234:1234::0000:0000:0000:0001 Diagnostics output : Jun 24 23:20:25 Unraid dnsmasq[237168]: reading /etc/resolv.conf Jun 24 23:2
- Minor
- 126 views
-
Unraid version: 7.1.3、7.1.4 After I upgraded to version 7.1.3, restarting the router would cause unraid to disconnect from the network. Preliminary investigation: unraid could not find the gateway after the router was restarted. So, I upgraded to the latest version 7.1.4. After restarting the router, the bug still existed. I checked the unraid settings in the LAN and it showed that the default gateway was wg0, and the IPv4 default 192.168.124.1 via br0 1010 was set incorrectly. The metric of 192
- Closed
- Urgent
- 731 views
-
I have 1536GiB in my server. This is reflected incorrectly in the UI, which states "1536 TiB" (I wish) and 1TiB usable. I believe it is all usable, as containers can see it all: So likely just a display issue, or rounding etc. Version 7.1.4/
- Minor
- 121 views
-
Getting network errors after update, UI is available and also jellyfin through nginx remotely but cant check for new apps, no community store and no Unraid connect. All these are are resolved with downgrade, attached are diagnostics. I have additional NIC, 10 gbit asus card rhea-diagnostics-20250622-1456.zip
- Minor
- 1544 views
-
After upgrading from 7.1.3 to 7.1.4, my docker containers no longer receive Multicast messages from anywhere. A downgrade to 7.1.3 fixed the issue. This may be related to other network issues with 7.1.4 server-diagnostics-20250623-1915.zip
- Solved
- Minor
- 1006 views
-
[Translated from Chinese] System Version: 6.12.5 Issue: Automatic system restarts occurring at regular intervals (every few hours). Background: After the previous version update, I did not restart the system, so the update did not take effect. A few days ago, there was a power outage (I have a UPS, so it wasn't a direct power cut). After the system started up and completed the update, the automatic restart issue began occurring. Problem Details: The system automatically restarts every few hours
- Closed
- 136 views
-
Hi so I was installing a new VM tonight, and during the install, the server hang. I checked, the server was frozen with kernel error on the display. I tried multiple VM config, multiple iso-s to install, but every single time Unraid froze to death with the kernel errors. Also, I already installed multiple VM in the past with the exacts same setup (including iso files) as I'm trying tonight. I downgraded my OS to 7.0.1, only to have exactly the same problem. So i wonder if in one of the last
- Closed
- 357 views
-
As title says, since 7.1.4 I have noticed that Samba as been crashing. I have no way of recreating or triggering it. I only notice because on the Mac a message pops up that network drives were disconnected. Jun 23 11:41:45 Tower smbd[1808387]: [2025/06/23 11:41:45.871258, 0] ../../lib/util/fault.c:178(smb_panic_log) Jun 23 11:41:45 Tower smbd[1808387]: =============================================================== Jun 23 11:41:45 Tower smbd[1808387]: [2025/06/23 11:41:45.871374, 0] ../../
- Minor
- 162 views
-
I have an iTunes share I export to a MacOS VM via NFS. It's also exported via Samba. When I try to access it over Samba my syslog fills with error messages, like the following, until /var/log is full. Jun 21 21:29:29 NAS smbd[53700]: fruit_freaddir_attr: ad_convert("MobileSync/Backup/befb940834f22f2a08a0c0798743a276bd743d26/b4/b433d7e80ae776e6d7e5b0b72aa94cfc9f34746b") failed Jun 21 21:29:29 NAS smbd[53700]: [2025/06/21 21:29:29.304654, 0] ../../source3/lib/adouble.c:1254(ad_convert_xattr) Jun
- Minor
- 204 views
-
Has happened several times, have moved log to storage, attached copy of log with latest crash. Several occurences, requires hard reboot. htserv-diagnostics-20250620_1514.zip syslog-10.21.12.20.zip
- Urgent
- 183 views
-
Kind of an odd issue I'm having. If I leave the network cable detached from the system, I do not have a localhost network connection. I can boot into GUI mode and open the built in firefox browser window but I get the error message "Network Unreachable" I cannot actually interact with the webgui. With a network cable attached, before a link can be established to the LAN, it appears the remote syslog server complains there's no connection, to the localhost as I have it configured to use 127.0.0.
- Annoyance
- 159 views
-
Hello, I was executing some operations inside a docker container (sickchill force copy task) and i noticed a weird CPU usage from the unraid console. I went in SSH and checked HTOP and I can see different percentages. Am I missing something? Thank you in advance.
- Closed
- 212 views
-
As the summary says, trying to configure a custom IPv4 network on interface br0.XX (VLAN XX) in docker. The drop down menu for subnet mask display /25 up to /30 with no option to select /8 for example. My VLAN 20 network is a 10.0.0.0/8 as per RFC-1918. The DHCP pool drop down allows /16 and up to /30 which doesn't make sense.
- Retest
- Minor
- 1013 views
-
I am having this exact issue linked below on 7.1.3
- Retest
- Minor
- 246 views
-
I have been running a gaming VM (W11) for several years with any big problems. After upgrading from v7.0.0 to v7.1.2 the VM goes in a pause state when trying to play Indiana Jones and the Great Circle. The other game I'm playing, Star Wars Outlaws (do I love LucasArts, or what?) works just fine. To get the VM going again I have to Force Stop. This is what is logged in VM-log: error: kvm run failed Bad address RAX=0000006b3eff41f8 RBX=000000000000002a RCX=00000222517ac070 RDX=00000222d388f0a0 RS
- Urgent
- 541 views
-
After upgrade i am just shown Array Starting. The logs only showing errors: Jun 18 08:39:35 Tower ntpd[2451]: error resolving pool pool.ntp.org: Name or service not known (-2) Jun 18 08:40:40 Tower ntpd[2451]: error resolving pool pool.ntp.org: Name or service not known (-2) Jun 18 08:41:44 Tower ntpd[2451]: error resolving pool pool.ntp.org: Name or service not known (-2) Jun 18 08:42:49 Tower ntpd[2451]: error resolving pool pool.ntp.org: Name or service not known (-2) Jun 18 08:43:53 Tower n
- Minor
- 358 views
-
Hi, i've tried to format the Drive sdj1 in my tmbackups pool; but it never succeeds. Looks like there is a bug as the device will not be named correctly (bold marked) Jun 17 19:31:16 StorageTower emhttpd: creating volume: tmbackups (btrfs) Jun 17 19:31:16 StorageTower emhttpd: shcmd (171): /sbin/wipefs -af --lock /dev/sdj Jun 17 19:31:16 StorageTower root: /dev/sdj: 8 bytes were erased at offset 0x00000200 (gpt): 45 46 49 20 50 41 52 54 Jun 17 19:31:16 StorageTower root: /dev/sdj: 8 bytes were
- Closed
- 177 views
-
Hi after the upgrade from 7.1.2 to 7.1.3 i´ll see a rc.local: installing /boot/extra packages error: failed connect to the hypervisor error: Operation not supportted: Cannot use direct socket mode if no URI is set. For more information see http://libvirt.org/kbase/failed_connection_after_install.html Then it tried to reboot but keept stuck. After ha "hard reboot" it does reproduce the same error message - but it seems the system stays running for now. Let me know if i need to provide specific
- Minor
- 236 views
-
After I updated to UNRAID 7.1.3, I tried installing different docker container from the app tab (i,e Lidarr (binhex,Linuxserver,hotio, and ich777 version) all version will not allow me to add artists. Will not allow mariaDB to talk to the ROMM container. I verified GUID, PUID, and UNmask also. PUID was set to 99, GUID set 100, and unmask set to 002. Type the different network types they did not help. All the Containers mad before upgrading work. After Upgrading my container are starting to act f
- 373 views
-
Share configuration: Allocation method: Most Free Multiple disks with relatively even free space distribution Cache drive configured to move files to array Mover tuning plugin is NOT used. Issue During the move operation from cache to array, hardlinks are occasionally breaking. I suspect the cause is mover's behavior when allocation method wrongly picked different disks for the files sharing an inode, but different path. This is likely not limited
- Retest
- Minor
- 8523 views
-
For the last few days I have been having trouble connecting to the App store, and updating apps. I have tried a number of things to fix the issue. I normally use Unbound DNS with a block list. I thought that might be the issue. I moved Unraid onto it's own VLAN that uses public DNS and no blocklist. I also tried tunneling my traffic out of a VPN, yet the problem persists. I have notice that if I go to Settings > Docker, and disable docker, the issue is fixed. If i re enable docker I will cont
- Urgent
- 178 views
-
Upgraded to 7.1.3 and had no issues. After running for about a week, my server went completely non-responsive, all dockers, web UI, everything. I had to power cycle it to bring it back up. I have downgraded back to 7.1.2 because without NginxProxyManager, my wife can't access HomeAssistant and the Wife Approval Factor is a huge issue for me. bb-8-diagnostics-20250615_0349.zip
- Urgent
- 153 views
-
i have been getting this error since updating to 7.1.3. sda for me is a usb external hard drive and my unraid flash is sdb which is for most people sda is the flash drive, i wonder if the error is somehow related to something looking for the unraid flash but it not being sda it throws the error. diagnostics attached Jun 8 17:31:48 unraid emhttpd: error: get_device_size, 1796: No such device or address (6): open: /dev/sda Error unraid-diagnostics-20250608-1830.zip
- Closed
- Minor
- 271 views
-
I've seen this on a custom backup script of my own invention which ultimately is a whole of server rsync backup to a locally mounted pool of 5 usb disks. Which does the trick great when it works! If I run it from the user scripts it will run for various lengths of time (about 1-3 hours) then crash. If I hand run it from a server prompt - same behavior - crash. If I ssh in using bash cmd line - runs perfectly every time to completion. I'd love to give more diagnostics but when it happens the se
- Minor
- 176 views
.thumb.jpeg.d7c86901c9df58490796ba8fe08312e3.jpeg)
