Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
After updated to version 6.12.9 from 6.12.8 had crash on boot : also in log every 5 min : " kernel: ata3.00: Enabling discard_zeroes_data" it seems because i run the script every 5 min for hdsentinel : `hdsentinel -r /mnt/user/HDSentinel/hdsreport.html -html` its reporting disks state like smartctl (https://www.hdsentinel.com/hard_disk_sentinel_linux.php) for i can see my all disk in Windows main machine in Hard Disk Sentinel...
- Minor
- 858 views
-
This morning I did update from 6.12.8 to 6.12.9. Everything looked good BUT my remote shares from Unassigned Devices don't work any longer. I use this to start my remote shares: /usr/local/sbin/rc.unassigned mount //192.168.178.101/disk1 Looking at the result it says "Success". But looking at the directories I see the first folder only. Looking at syslog it shows lots of: Tower kernel: CIFS: VFS: directory entry name would overflow frame end
- Minor
- 700 views
-
I have a raidz1 zpool with 3 16TB disks, I found it cannot spin down, becuase there are small I/O written every about half a minute. Kapture 2024-03-19 at 08.52.17.mp4 I re-checked my shares, no share is assigned to zpool right now, and I can see there is nothing in zpool at all. I've set spin down in 30 minutes in unraid settings.
- Closed
- 693 views
-
Hi, I am using ftp for file transfers and since i updated to 6.12 from 6.11 i often get failed uploads when i upload a lot of files and folders. This is reflected in the systeml og as such: Mar 27 14:18:32 SERVER vsftpd[1322]: [myuser] FAIL UPLOAD: Client "192.168.1.100", "/mnt/user/Backup/Some Folder/Foo_Bar - 2024.03.27/My Files/2024_01_07__21_27_37/file.json", 0.00Kbyte/sec This is frustrating because SMB is not viable over connections with some latency and gener
- Urgent
- 420 views
-
I've had more than a few crashes with this hardware, ever since I updated to 6.12.8 from 6.12.6. I've swapped over to different hardware than the original crashes save 1 Quad AIC NVME card with 4 * NVMe The HDD's the USB Key. The system will run for up to about a week then it crashes hard. It will respond to pings but everything else appears non-responsive, no SSH. All dockers and VM's gone. System changes from previous failing platform: Same model of moth
- Urgent
- 941 views
-
Since the upgrade from 6.12.3 to 6.12.5, the following services do not listen on the configured (public) IPv6 address: SSH SMB http (Unraid web interface) I made the following observations: ping to the Unraid configured IPv6 is working The services mentioned above are not answering to connection requests via the IPv6. IPv4 working fine The file /etc/samba/smb-names.conf contains the following entry: interfaces = 192.168.2.2/24 0 127.0.0.1 ::1
- Annoyance
- 2591 views
-
It's not possible to save the extra origins. The button is just grey It's only one name but also adding a second name doesn't change the behaviour.
- Minor
- 405 views
-
After shutdown and adding a couple of SSD the web interface is not working (NGINX 404 error) I also tried booting with the GUI option, same error. Not responding either on 127.0.0.1 , tower or internal ip address Please find attached the diagnostics file. Thank you tower-diagnostics-20240326_1634.zip
- Minor
- 246 views
-
Since upgrading, if I stop the array to change settings or anything, I am unable to Start the array back up. Screenshot can be found here: https://imgur.com/NiqIRBL. The red power button in top right corner would allow me to start the array if it were present, but I need to submit another bug report where it disappears randomly. EDIT 1: Running unRAID OS Plus v. 6.7.2
- Closed
- Annoyance
- 3381 views
-
On the "Disk settings" page the following help text needs some more details or clarification IMHO: Shouldn't this be "cache or pool"?
- Minor
- 271 views
-
Myself and many other users are experiencing many issues with SMB shares using Windows Active Directory since upgrading to 6.10.2. Upgrading to 6.10.3 has not fixed this. This are all listed in the forum thread My own issue is that for most of the time since upgrading to 6.10.2 I cannot access any UNRAID share with my own user account - however this is intermittent and occasionally access works fine for a day or two. A few other user accounts are affected but also some
- Urgent
- 34600 views
-
loading the plugin page takes a long time, then checking takes a while, the some plugins say not available. server-diagnostics-20240321-1036.zip
- Minor
- 603 views
-
我购买了新的专业许可证。 今天也是 6.12.8 的全新安装。 兑换激活码时出错：无法读取未定义的属性（读取“message”）
- Solved
- Minor
- 512 views
-
I have been using Unraid with my HP Proliant Microserver N54L server with no problems for a number of years. However I've had a problem will any software update beyond 6.10.3 and now maintaining my server at this version is no longer viable. I'm looking for a solution to my issue. Typical behaviour is that all works fine for a number of hours, however at some point the server just hangs meaning: 1. power is on 2. web console is not responding 3. unable to ping server ip
- Closed
- Annoyance
- 1052 views
-
The WireGuard VPN, under Settings -> VPN Manager does not autostart on reboot, even with the AUTOSTART toggle on. It can be manually started by clicking the INACTIVE/ACTIVE toggle and all works fine afterwards. VPN configured as IPv4 + IPv6 with all default settings, except for the local endpoint and port, which are custom. 2 peers setup with "Remote tunneled access" and everything else default. The peers connect and can connect normally once the VPN is activated manually.
- Annoyance
- 5599 views
-
Tried to use the IGPU in the intel i5-11500, but it's not working. Tried intel gpu TOP and the GO files but neither worked. Kept getting No such file or directory. It works with my i3-10100. @Cpt. Chaz
- Minor
- 748 views
-
Hi, my Unraid system is random crashing wiht 6.12.6. In the syslog can be found some restarts of samba service. It seems that another user has similar problems --> https://forums.unraid.net/topic/152651-array-randomly-shutting-down/ Syslog war recorded using a syslog server on my windows pc. MemTest already executed for 24h. No Problems found. Best regards Mathias Update: Since there was no respone from anyone within over one week (although the ticket is marked as u
- Closed
- Urgent
- 1048 views
-
Hello everyone, coming from 6.12.2 with an stable server, the 6.12.4 update I did a week ago broke something. Once a day I find the server frozen, mostly in the morning. No WebUI, no SMB access, SSH or ping. No response. I have to force reboot the system. Main use for the server is for light media consumption with Jellyfin, Nextcloud sync from phone (CalDav, CardDav), Unifi etc. and from time to time some media conversation with Tdarr or Handbrake dockers, rarly some re
- Urgent
- 5914 views
-
Hello, on my Unraid 6.12.8, I have 2 1TB nvme SSDs from the same manufacturer, acting as cache using BTFS I recently noticed in the logs that apparently one of the SSDs might be dying. Mar 13 18:35:13 f kernel: btrfs_end_super_write: 282 callbacks suppressed Mar 13 18:35:13 f kernel: BTRFS warning (device nvme0n1p1): lost page write due to IO error on /dev/nvme0n1p1 (-5) Mar 13 18:35:13 f kernel: BTRFS error (device nvme0n1p1): bdev /dev/nvme0n1p1 errs: wr 326893147, rd 40441477, flush
- Minor
- 830 views
-
Hello everyone, I've been experiencing consistent kernel errors and system crashes on my Unraid setup (version 6.12.8) that seem to revolve around ZFS operations and memory handling issues. Below, I've detailed the symptoms, hardware specifics, and logs for reference. System Information: Unraid Version: 6.12.8 Hardware: ASUSTeK COMPUTER INC. System Product Name/Pro WS W680-ACE IPMI, BIOS version 3101 dated 12/08/2023. Storage: ZFS file system in use Symptoms: T
- Urgent
- 609 views
-
Not sure what the root cause of this is. I didn't have time to dig into it, but a reboot has resolved it for the moment. They're i210s so should be very well supported, but it is a new board. Hopefully not borked hardware. I've since pluged a second interface into the bond, so hopefully if this happens again it won't take down both. Figured I'd flag it anyway. Diags attached, let me know if I can provide anything else. server-diagnostics-20240315-0811.zip
- Minor
- 323 views
-
the gigabyte-wmi driver was added with the most recent kernel update, however I am not getting any temps on my B55M DS3H Motherboard. I am also running an AMD 7 PRO 4750G.
- Solved
- Minor
- 2075 views
-
I upgraded my server from 6.12.6 to 6.12.8. Since the upgrade my NIC will renegotiate connection speed every 45-90 seconds between 1gb and 10gb. After a number of renegotiations the connection fails. It can be restarted if I bring the NIC down and back up or disconnect and reconnect the cable between the NIC and the switch. I've replaced the switch, the cable and the gbic with no change. The only fix is to downgrade to 6.12.6 which works normally. The NIC is an Intel X540-AT2 using the ixgbe dri
- Urgent
- 787 views
-
Hi, I am seeing a lot of 'Out of memory' reports in my logs. Often prior to a general crash of Unraid (not 100% sure of they are related yet) which require a forced reboot to recover from. At the movement my setup is not doing much demanding tasks. I am just trying to transfer the files from my Synology NAS to the Unraid server. However, the frequent crashes have me a bit worried about replacing the Synology (which is a bit dated but rock solid on stability). I have
- Closed
- Minor
- 752 views
-
Repro Steps: Create an orphaned docker image. Add a million docker tags to it: docker tag image_id foo:bar1 docker tag image_id foo:bar2 docker tag image_id foo:bar3 ... Open up the docker page. Enable advanced view. See that your page width is now extremely wide from all the docker tags. Proposed solution: Add style="white-space: normal;text-align: start;" to the td containing the orphan image info
- Annoyance
- 268 views
