Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Updated to latest 6.12.0 stable version. logged on to my GUI and literally everything maxed out and struggling even lo load the GUI pages. Took me a good 5 mins to be able to turn off my dockers 1 by 1. even when all dockers turned off, server was "idling" at approx 30% when usually about 5% when all dockers turned on. typed top in command line and shfs was the top command taking all the resources. Unfortunately had to roll back a version! dhcplog.txt docker.txt sysl
- Minor
- 4684 views
-
Despite the fact that QEMU is compiled with OpenGL support since 6.10, not all elements are in place for it to work. I can't create a VM with "egl-headless" graphical framebuffer. I've created a post in the VM forum to explain the steps I made: To follow-up from that post I modified the eglinfo executable to create a GBM surface like QEMU does and to check what the error code is. The error code is surprisingly "EGL_SUCCESS", but it still returns "EGL_NO_DISPLAY"
- Minor
- 1042 views
-
Simple bug, repeatable. You can use the terminal command: docker network create ThIsIsANeTWoRk when installing a docker, and choosing ThIsIsANeTWoRk it will try to install using "thisisanetwork" and will fail.
- Minor
- 523 views
-
AS the image shown, as the ipv6 prefix changed, the network setting will be broken —— Thus the br0(or eth0 here) can't be created as rc.docker start.
- Minor
- 589 views
-
Over the past few months, my Unraid server has been having issues that can't be fixed by anything other than a reboot. Docker services stop and eventually the UI won't even load. At first it was showing up as BTRFS errors (something like `write time tree block corruption detected`). The most common fix for that was deleting docker.img and recreating it, which I've done ~5 times. The next thing I did was get rid of my cache pool in favor of a new XFS-formatted drive (so no more BTRFS drives).
- 3198 views
-
Parity drive refuses to spin down even after 3h+ of no activity. Manually trying to spin it down through the UI just shows the loading icon and then it stays spinning. Other drives can be spun up and down without issues. flareon-diagnostics-20230306-1914.zip
- Closed
- Minor
- 667 views
-
Finally took the plunge and did an upgrade to 6.12.4 from 6.11.5. 6.11.5: ZFS(RAIDZ1) User shares with same names as zfs dataset with a link(inside the share) to zfs dataset. 6.12.4: Create a new pool, and add all HDDs. Change primary storage for all shares to zfs pool. Global Share Settings -> Permit exclusive shares. So far so good, however some shares (from within zfs pool) show Exclusive access: No After a reboot,
- Urgent
- 3848 views
-
My server was unresponsive and I wanted to roollback to 6.12.3 but for some reason this dosent work? I have tried multiple times staring the server and doing roollback and reboot but it keeps me on 6.12.4 Logfile attached.
- Closed
- 1028 views
-
I made a reddit post as well.. but im attaching a screenshot. hopefully nothing important is in it... Anyways the title is pretty self explanatory, I updated from 6.12.3 > 6.12.4 and it updated fine, upon reboot every line of text coming from the console looked like the screenshot.. it booted up fine and so far everything seems functional with no other issues.. Should I be worried about this? I have not rebooted the server again. Im afraid to reboot to be completely ho
- Minor
- 490 views
-
System log is flooded with below messages (after the upgrade): Sep 26 08:47:39 UnraidZFS smbd[31175]: synthetic_pathref: opening [Someone’s MacBook Pro.sparsebundle/bands/2:AFP_AfpInfo] failed Sep 26 08:47:39 UnraidZFS smbd[31175]: [2022/09/26 08:47:39.199065, 0] ../../source3/smbd/files.c:1193(synthetic_pathref) This is applicable for all shares: synthetic_pathref: opening [data/backup/Downloads/ntfs.sh:AFP_AfpInfo] failed unraidzfs-diagnostics-20220926-
- Urgent
- 19466 views
-
I have upgraded from the previous version, I followed all the guidance in the release notes including deleting and recreating my port forward (fritzbox user) and I cannot regain access to my plex docker. it appears to be running but I'm unable to get in via the gui, ip address, or any of my client devices. reverting to previous version didn't work either. tower-diagnostics-20230903-2056.zip
- Urgent
- 1569 views
-
I didnt test it in the other versions but 6.12 does show bogus port mappings when the network is mapped to a container. I would at least expect it to be empty as it was on 6.11.5 or to be the real container mappings, not the ones of my Endlessh and some Webservice. Edit: Funky, they even change
- Annoyance
- 685 views
-
Hello team , I have an odd situation with my box. I have a 4TB cache pool in RAID1 brts configured . The only file that I have on the entire disk is an 2.51TB disk image reported as 2.76TB in gui but anyways. Problem is that I created an 1TB another image and I was stunned that after 400Gb on this one the cache pool was full . I think I should still have a least 1TB disk space on this left. To mention that before creating and filling up the vm disk image I had around 1.2TB disk space
- Annoyance
- 649 views
-
Hello everyone! I have followed the steps in "HOW TO SETUP TAILSCALE OR ZEROTIER COMMUNICATION" documentation how to get Tailscale to work on Unraid 6.12.0. However, there is a brick wall I keep running into. When I restart my server or turn on/off the array. Tailscale's IP address to the server stops working unless I go into Settings>Network Settings>Include listening interfaces and remove "tailscale0" and re-add back in. Then I am able to access it via SSH and the GUI, but SM
- Closed
- Annoyance
- 14830 views
-
Anyone else seeing this? After you try to upgrade a docker when it shows available, you go through the update, but nothing happens. Goes back to same version it had before.
- Minor
- 3327 views
-
Hi, It seems that the anonamise doesnt work as expected. Its not removing LOCAL_TLD from ident.cfg so if people are using custom hostnames/dns they could be exposed. Its also not removing IPv6 addresses. So again if people are using routable IPv6 address they are potentialy being exposed. This is in network.cfg and in logs syslog ext. Thanks, Daniel
- Urgent
- 321 views
-
Upgraded yesterday (09/01/23) from a 6.11.x with no issues. Deleted and rebuilt my docker image, to recover 10 GB of space. Beyond that, haven't really done anything else with the system. So far, just the single crash today (09/02, around 6 pm) , but I'm not sure how to interpret the syslog, or if there is anything I should do / be concerned about. Syslog, to me, actually shows 3-4 different errors happening this afternoon. Dunno. FYI. sysl
- Minor
- 722 views
-
In 6.11.0 NTLMv1 auth had been removed from the kernel, it was restored in 6.11.1 as per release notes, and had been confirmed working here. It seems it's gone again, but I'm not sure when and no release notes make mention of it since. I have a Samba docker container that's used to share a specific disposable scratch path with all legacy options enabled for use with my old/retro machine tinkering, but I can't connect to it anymore with e.g Win98. Had to install an alpine V
- Annoyance
- 521 views
-
Posted as a separate incident with diagnostics from main release thread. Upgrade from 6.12.3 to 6.12.4 appeared to go OK, but I have a network card issue. I have a 10gb fibre card, and onboard 1gb nic. These are set to a bond and it mainly uses the 10gb (onboard is enabled for WOL - a script after waking forces the 10gb card to be active). My fibre card is constantly showing as disconnected (Interface Ethernet Port 1 is down. Check cable!) . Changing designations bet
- Annoyance
- 2671 views
-
Unraid sets static ip br0. After the upgrade and restart, the web gui cannot be opened. After I changed the dhcp in the USB flash drive to yes, it still cannot be opened. After deleting network.cfg, the netowork.cfg will not be automatically generated after the restart. Below is the diagnostic report and some configuration parameters. Do I need to provide anything else? tower-diagnostics-20230902-1446.zip
- Closed
- 1486 views
-
I have 2 servers 1 with tones of VMs Dockers drive pools and config changes that had no issue with the latest 2 updates. with that said however my other server which is a backup server with a few dockers and 1 VM on it seems to have an issue with 6.12 and 6.12.1. It will not fully boot. it makes it to the bzroot line after the startup menu and then restarts and is stuck in that boot loop. its and Intel Xeon E5-1660 V3 so for sure not an 11th gen that i read are having a few issues wi
- Annoyance
- 3727 views
-
I used to be able to use SPIKE.HOME.SOMENAME.ORG_docker In MAIN-Unassigned Devices-NFS Shares. I.e the mount button worked and was not grey. Now even if create a new share, select 'Load Servers' (which returns the FQDN above) and 'Load Shares', the button is 'MOUNT' button is grey and will unable to interact. If I manually put in the IP address, then the share is mounted and 'MOUNT' button works. Log shows: unassigned.devices: Remote serv
- Solved
- 793 views
-
Hello, Excuse my pronunciation, english is not my natural language. Shelf is a NetApp DS4243 / IOM6. The controller is a NetApp PMC-Sierra PM8003 SCC 4-Port QSFP PCIe x8. The 6.8.3 Version has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.39. The 6.9.0-beta30 last working version. The 6.9.0 rc2 Version stable has the kernel: pm80xx 0000:27:00.0: pm80xx: driver version 0.1.40 The controller didn't find my drives with the new driver. The
- Solved
- Urgent
- 10785 views
-
Hello, on a brand new installation on some existing hardware, I'm facing an issue with missing csrf_token whenever I try to add any shares to my setup. Symptoms: - unraid emhttpd: error: cmdEditShare: missing csrf_token This error appears in the log whenever I try to add a share at any point. - Whenever trying to add a share, another browser tab is opened to unraid/update.htm History: - Brand new installation, did not face the issue. Could create new
- Urgent
- 1183 views
-
unable to reach other docker containers when power fails and device is rebooted once power is back on. fix for it is to reboot the server once its back up or toggle to false then back to true and reboot
- Annoyance
- 455 views
