Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Hi, The upgrade went fine, no issues. I started coping some photos from an iMac to the Server, which went fine for about an hour. Suddenly the copy process dies with an error, and ALL the SMB shares are gone. Nov 7 16:51:36 Futurama emhttpd: read SMART /dev/sde Nov 7 16:54:43 Futurama dhcpcd[1229]: br0: failed to renew DHCP, rebinding Nov 7 16:54:43 Futurama dhcpcd[1229]: br0: leased 192.168.7.227 for 14400 seconds Nov 7 16:58:35 Futurama smbd[29181]: [2022/11/07 16:58:35.
- Solved
- Urgent
- 6422 views
-
Hi. The NVME controller cache sems like its malfunctioning and so i'm posting a report, as requested. I'm also going to post everything that has led up to this. So ... I upgraded recently to 6.11.0 from 6.10.3. Apparently had no issues, so i upgraded right away to 6.11.1, finished the upgrade and then to visit my mother (2/3 days). When i came back, i had the W11 VM paused. Worried, first thing i did was check the logs and the state of the cache drive, and by i
- Closed
- 1183 views
-
the gui lets you create a share like '.downloads' but then it says it was deleted when creating and the gui fails to show it, but it it actually created it: root@unraid:/mnt/user/.downloads# pwd /mnt/user/.downloads
- Minor
- 585 views
-
After hours of unsuccessfully troubleshooting why connecting to Unraid by server name or IP from Windows via SMB in Unraid 6.11.3 wouldn't show any share folders, I rolled back to 6.11.1 (to avoid the drive formatting bug I also encountered in 6.11.2) and the folders instantly showed up again in Windows. Shares were all set to SMB Export and Public. Windows Credentials had a dedicated non-root Unraid user/pass configured. I've attached my diagnostics.zip from my 6.11.1 (-332.zip) an
- Solved
- Minor
- 954 views
-
- 434 views
-
Just did upgrade all servers to 6.11.1. The first thing I did notice was a difference during Docker Container updates. "Please wait" on "Removing orphan image" does not go away.
- Minor
- 2038 views
-
So I scanned for plugin updates. It found three updates (one of them is Community Apps itself). I clicked to update, but something happened (not exactly sure... did it freeze? Did I close the tab? I was in the middle of various tasks so...). Anyway when I opened that page again, the three plugins show as "pending". Refreshing the page OR rechecking for updates STILL leaves those three as "pending". So... what now? EDIT: Also clicking "update plugins" (whe
- Minor
- 2971 views
-
Just to preface this so you are aware: This seems a kernel bug, not sure if anything can be done on your end about it. My server motherboard is an MSI MORTAR 660 MATX intel board. Noticed when server booted the cpu and system fans would run but would not throttle or respond to temperature changes. This board at least seems to use a PWM chipset that isnt detected or loaded automatically by Unraids kernel on boot. Manually loading the module from cmdline/shell with modprobe nct6683 allows
- Minor
- 932 views
-
After upgrading to 6.10 , GUI stopped working , same in safe mode.. i'm kinda stuck atm, cant work ;/ is it even possible to revert updates ? b0x-diagnostics-20220518-1356.zip
- Urgent
- 6517 views
-
In Vers. 6.10.x I have never had that problem now every day 2 times or more the system is going down ... When I log in Array is not startes and saying "unexpected shutdown"... I start the array, cancel the parity check and everything looks fine ... for some hours.. I have no clou what is the problem.... unraid-diagnostics-20221110-0853.zip
- Urgent
- 529 views
-
Hi, I have updated to 6.10 stable and yesterday I installed a new Win11 VM. In that VM I enabled Memory Integrity (Core islolation) and instantly the VM consumes ALOT of resources. I have ryzen 7 3900x with 4+4 cpus allocated, just starting Edge or Firefox and have empty tabs consumes 50% of the CPU. I installed openvpn client on that machine and doing a speed test gives me a result of 20% of my maximum bandwidth while alot of CPU is used. I use many win11 machines with Memory Integrity
- Annoyance
- 1588 views
-
Hi Unraid Team, I just install unrail 6.11.3 in my machine n7505 with four net ports( i225). Sadly it turn out that the last net port（ 05:00.0）encount error: unknown pci header type 7f when I try to passthrough. Please help. Thanks. the Failed net port： This are all the NICs when use lspci, acutally all NICs is I225-V3, but only the last one hit this issue. So strange. Please see the last NIC below. 02:00.0 Ethernet controlle
- Urgent
- 1300 views
-
All I see is the word "Icon" and the icon of the VM when I try to add a new VM or edit exiting VM. Tried both Safari and Firefox just in case it was a browser issue, no difference. I am able to start the VM.
- Solved
- Minor
- 916 views
-
On the removing orphan image step the successful message should be the last line instead of being positioned before the "Please wait" message upon completion. Or alternatively the "please wait" message should be replaced with the completion status. All other steps of the docker container update process follow a logical order except for this one.
- Annoyance
- 343 views
-
I have a share with "Secure" setting on my server. There's a printer that can save scanned document to it. The printer can only do NTLMv1. 6.11.0 removes NTLMv1 which makes the setup not working. I had to disable access control for the share. 6.11.1 makes the setup working again. 6.11.2 the access issue come back. Reverted to 6.11.1 back to normal. Note that 6.11.2 brings security update for Samba, could it be the reason of broken NTLMv1?
- Solved
- Minor
- 677 views
-
Cant format a new WD 20TB Red HDD on the latest version 6.11.2. Rolled back to 6.11.1 and verified working correctly. After updating again to make sure it wasn't a fluke I had the same issue on 6.11.2 a second time. Attached log files created from the first downgrade unraid-diagnostics-20221105-1011.zip
- Urgent
- 1154 views
-
i have updated from 6.9 to 6.11.1 and than to 6.11.2. On both 6.11.x system hangs after 1 day of using, every day. only reboot with button could help. syslog-172.16.82.1.log tower-diagnostics-20221108-1229.zip
- Urgent
- 454 views
-
The option for Primary vDisk Size is missing when creating/editing windows 10 VMs. Seems to be on the webUI form page for only Windows 10 option. All other vm types have that option.
- Minor
- 1078 views
-
After opening the UPS Settings page the Details section fails to load. The unraid loading graphic just plays continuously. Not sure when this behavior started because I never need to mess with those settings. Interestingly it does show some of the details in the UPS section on the Dashboard page, and the UPS shutdown still works as intended (had the first storm of the winter friday). So everything is working, it just doesn't display the details I guess. Using an APC SUA3000RM2U over etherne
- Minor
- 648 views
-
After updating from what I think was 6.11.1 to 6.11.2 my Samsung_SSD_980_1TB is now not recognised as a pool device Attached is log Downgrading to 6.11.1 does not fix the problem ser-diagnostics-20221106-2040.zip
- Urgent
- 629 views
-
Hallo Community ich bin begeistert von euch was ihr hier erschaffen habt echt super system leider bin ich nicht so gut wie hier darum bräuchte ich eure Hilfe zum meinem problem ist die Docker lassen sich nicht mehr hochfahren es kommt immer der Fehler Server error bei Docker und bei nextcloud kommt der Fehler error code 403 könnt ihr mir da weiterhelfen ich dank schon am voraus
- Minor
- 413 views
-
Hi, My Unraid network looks something like this. (the piece in red seems to be the problem) I have had this setup for almost a year , it seems the nic is getting detected in unraid but no file transfers or pings happen thorough this nic. In 6.11.1 it seems the nic was not even getting detected but on 6.11.2 the nic gets detected every time but does not work to the desktop. This does seem to be a unraid issue , should i try downgrading to 6.10x , Classifying this as minor as the mai
- Urgent
- 549 views
-
After upgrading from Unraid 10.3 to 6.11.2 (see upgrade steps) I noticed the following issue: Further investigation shows the image is indeed missing: Disclaimer: I use the vm_custom_icons container, but have the option "Keep Stock VM Icons" set to "Yes".
- Solved
- 1065 views
-
once I have updated unraid os from 6.9.2 to 6.11.0 my nvme drives were gone. They are still listed in systems devies though. When I do an os restore to 6.9.2 my drives are available again. I have also created a new stick with 6.11.0 and ran it. There my drives are available. I don't know what's going on here and hope to get some advice. ***I attach the diagnostics made under both versions*** tower-diagnostics-20220926-1603_6.9.2.zip tower-
- Closed
- 4309 views
