Stable Releases

Hello there aleadry a report for the new version *sadly*   For some reason when I do try to update to the latest release, my boot key get Corrupted, or i'm totally enable to start the server at all. When I checked what inside my key (after the update) I have a lot of file call "FSCK0007.REC" that goes up to 360 after FSCK (they got added only after the update) Second time I tried to update, my key just got full corupted and I lost like 65% of his content. And I where total

Hey all, First time running a "cumulative parity check", have it set to run on the first day of the month for 6 hours a day until completed. On 7/1 it ran for 17+ hours until completion. thevault-diagnostics-20220703-1021.zip

My network card is an nvme interface. Think it's an updated kernel interface logic problem, but the new 6.11.1 doesn't fix the problem I've found recently, and in the diagnostic info net, I see: Can't change the state from D3cold which is now D0. Go back to 6.10. 3 does not have this problem. Will new problems be solved? unraidlun-diagnostics-20221005-1703.zip

Hey guys,  Lateley Unraid keeps messing the array and I have to restart the server to make it work again. Is there a tool that I can use to diagnose the problem?

tower-diagnostics-20221031-1342.zip

Hi,   Please help.  I started receiving the following error messages in the console after upgrading to 6.10 (further upgrade to 6.10.1 changed nothing): error: failed to connect to the hypervisor error: Operation not supported: Cannot use direct socket mode if no URI is set     TROUBLESHOOTING SO FAR: I stopper the VMs and Docker - checked all paths and drives. All seems to be OK. I deleted the VMs completely - no change. I removed unnee

I have random errors when it comes to Windows 10 and SMB security shares.  I encode/move a lot of media around, I use windows 10 VM from UnRaid as well as my actual Windows 11 gaming machine to manipulate the files.  Randomly I'll get the error from windows the action cannot be completed because the folder or file is open in another program while trying to move/rename a folder/file that is in a secure share. This error pops up on both PC's so this is definitely not just a windows thing

After upgrading from 6.9.2 to 6.11.1 Today no VMs I had before will start, upon trying to start them the system enters a locked state and no other webui tabs are accessible. Restarting the GUI nginx does recover the system however if the VM tab is clicked or the VM manager the UI enters a locked state again and then requires a whole system reboot to bring things back alive. At this time I have no working VMs have tested with Win10 and Win11 VMs do not currently have any linux vms. Please let me

When using a tabbed display I can't select the last item in the bottom right. Where does this overlay come from?    

Hey, I would like to report the following error. I have an Ubuntu Desktop VM running on my Unraid server. Last week my Unraid crashed completely twice and was no longer accessible in any way. In the meantime I could reproduce the error. When I shutdown the Ubuntu Desktop via Remote Console (RDP), Unraid often crashes completely (not always) but the last two times I tried to provoke the error, the 2nd and 3rd time. The VM is always shut down here on their desktop, not in the Unraid WebG

When Unraid loses communication with its UPS, it sends "alert" severity notification, but it also sends an "alert" severity notification when UPS communication is restored. I believe when UPS communication is restored it should be a "normal" (or at least warning) severity notification, which would be more consistent with how other system notifications work (IMHO).  

I upgraded host unraid to 6.11.1 and guest VM to 6.11.1   Virtual disks are not shown the the unraid UI but lsblk are present. Virtual disks ara attached with "virtio" driver using unraid VM Manager. log appear  emhttpd: device /dev/vda problem getting id each second   I tried with q35-5.2(the one I had before upgrade) Q35-7.1 and same versions for i440fx   Seems a bug

tldr: reproducible "Guest has not initialised the display (yet)" bug somehow corrupting VNC in VMs also breaks passthrough and is an absolute nightmare when troubleshooting VM passthrough.  So I've spent the last 2 days trying to get reliable Windows 10 and 11 GPU passthrough with incredibly frustrating results. After painstakingly following all over the information online (thanks spaceinvaderone!) I reached my wits end with an attempt at Windows 11, cut my losses and set up a windows 10 VM

Hi everyone, I'm pretty new with Unraid and really enjoying the software! Got lots of help from past discussiont in the forume the past month... Thanks evetyone!  This message is gonna be a bit of a mess 'cause I have many information about the occurance I'm expericencing. I think I've found a bug, but would like to see if I'm the only one experiencing the issue: The "network load" bar in the dashboard is always sending stuff. This is very unusual to me, since I'm working in C

After updating the Docker container, the orphaned image is removed.  The information "Please wait" is still displayed after removing the orphaned images.   Old images is removed and system working fine.

i run 3 nics on my unraid, 1x 1gbe mtu 1500 is mgmt and internet connectiviy and i also run 2x 10gbe mtu 9000 as data non routeable subnet for smb multichannel after upgrade to 6.11.0/1 shares are browsable but on any file access i get the following error yggdrasil  smbd[10257]:   smbXsrv_client_connection_pass_loop: smb2srv_client_connection_passed() failed => NT_STATUS_OBJECT_NAME_NOT_FOUND   if i revert back to 6.10 no issues and works as expected   in 6.11.0/

Dockers seem to be working, I can access SMB shares but disks vanish from the Dashboard & Main tab and browsing files through the Unraid UI brings up errors but appears to mostly work (I think)   Warning: syntax error, unexpected end of file, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/disks.ini on line 240 in /usr/local/emhttp/plugins/dynamix/template.php on line 36 Warning: syntax error, unexpected end of file, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"'

I just updated to 6.11.0, until now placing the keyfile to decrypt the array in root at startup (scp command in the go file) would decrypt the array on startup.  The go file is the same and the key file is in the current location. The array still won’t decrypt on startup. [edit]switched back to 6.10.3 immediately started working again

System runs great for about a day before locking up on 6.11.0 & 6.11.1. Had to do a hard reboot. This has happened several times, going back to 6.9.2... Log file below. syslog-192.168.1.15.log       Intel® Core™ i5-4670K CPU @ 3.40GHz, 16gb of ddr3 Ram, Gigabyte Ga-Z87-D3HP motherboard, GeForce GTX 550 Ti Gpu.

Hi, I just stumbled upon the manual section about "how to reset the root password" and I guess, I have found some typos that may lead to trouble. So could someone check this and correct the manual if I am right? Note that this will reset all user passwords including ‘root’ user to null (blank). There is an alternative procedure that can be used for just resetting the root password (but is a little more prone to error): Plug the USB drive into another computer Bing up an editor (such

After upgrading from 6.10.0 to 6.11.1, VMs with OVMF TPM fail to start. Even a new VM with OVMF TPM fails with to start this same error. VMs start normally after reverting to 6.10.0.   I attached the diagnostics file generated before reverting.   tower-diagnostics-20221006-1928.zip

I held off a bit on updating in hopes that it would go more smoothly, but unfortunately that hasn't happened. After rebooting I could no longer access the WebGUI.  At first I reconnected a monitor and saw that it wasn't even finishing booting.  From where it stuck in the log it seemed that the disklocation plugin wasn't finishing.  I was able to access through SSH and I moved the disklocation.plg and directory out of the the boot folders.  Now the system will complete and get to the login p

Hi,   since a few days i have per day one segfault error in libvirt.so:   Oct 9 01:16:16 Avalon kernel: unraid-api[31635]: segfault at 30 ip 00001463a22bb059 sp 000014639bd1de10 error 4 in libvirt.so.0.6005.0[1463a2248000+1f6000] Oct 8 22:47:50 Avalon kernel: unraid-api[46409]: segfault at 30 ip 000014f389aa8059 sp 000014f3732cde10 error 4 in libvirt.so.0.6005.0[14f389a35000+1f6000] Oct 7 12:25:50 Avalon kernel: unraid-api[61384]: segfault at 30 ip 0000152d07c16059 sp 00

Remote access (wireguard VPN) to server work great but since a 6.10.3 RCx upgrade the remote acess to LAN don't work anymore.   zbox-diagnostics-20221003-1034.zip

Investigated a little after reading this:   /boot/config/domain.cfg gets written to every time the dashboard or VM pages are loaded, confirmed both by the modified time and the number of writes on the Main page going up.   I've looked at my daily flash backups of the past week before the upgrade from 6.10.3 to 6.11.0 and every day that file also has a modified time that matches when I'd have checked the GUI last so the issue was present before 6.11.0.    This happe