Stable Releases

Always reproducible on mobile (iOS). Don't know about other platforms.   To reproduce, paste the encryption key into the field. Notice the "Start" button of the array remains greyed out.   A partial workaround is to type one extra random character into the field, then delete it. Then the "Start" button of the array will be enabled.

Everything was running fine on 6.11.0 before upgrade, but now my 'gaming' vm with nVidia 3060ti GPU passtrough seems to regularly hang   When this happens, the entire Unraid server reboots after a couple of seconds   I had the same result when upgrading to previous version also, but just rolled back then without logging a ticket tower-diagnostics-20221110-2231.zip

Version 6.11.5 2022-11-20 Model: Custom M/B: ASRockRack X570D4U-2L2T Version - s/n: BIOS: American Megatrends International, LLC. Version P1.40. Dated: 05/19/2021 CPU: AMD Ryzen 9 5900X 12-Core @ 3700 MHz HVM: Enabled IOMMU: Enabled Cache: 768 KiB, 6 MB, 64 MB Memory: 64 GiB DDR4 Multi-bit ECC (max. installable capacity 128 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 Kernel: Linux 5.19.17-Unraid x86_64 OpenSSL: 1.1.1s Uptime: 23 hours, 33 minutes   Not sure what to ma

Found out recently that when reading a corrupt btrfs file using user shares the transfer doesn't abort with an IO error as it should, this is similar to what happened before with Samba AIO enable, but in this case it also affects local transfers, when using disk shares it works as it's supposed to, I never caught this before since I always tested with disk shares, it goes back to at least v6.6, which is the oldest release I tried.   At first I though it would be related to having direc

Hi,   I was not able to access my unraid webUI (6.9.2) due to the SSL Certificate Update. I was able to follow the instructions and regain access to my server UI. I was a bit frustrated because I have not been able to previously upgrade the OS (see here). I figured that latest is 6.11.5 and maybe in the last 3 patches since 6.11.2 there have been some improvements and fixes around upgrading.   I backed everything up (flashdrive and parts of my appdata) and tried the upgrade p

Hi all,   I decided to upgrade Unraid OS today from 6.9 to 6.11.2. The download and install went fine then asking me to reboot. The reboot has been stuck for ~30 mins at the image below.   I have not force restarted or pulled the plug yet. Thoughts?    

Hello, how can I correct this error? Thank you        plugin: updating: unRAIDServer.plg plugin: downloading: https://unraid-dl.sfo2.cdn.digitaloceanspaces.com/stable/unRAIDServer-6.11.5-x86_64.zip ... failed (File I/O error) plugin: https://unraid-dl.sfo2.cdn.digitaloceanspaces.com/stable/unRAIDServer-6.11.5-x86_64.zip download failure (File I/O error)    

I've found that if the NIC reconnects to the network for whatever reason (network goes out, Ethernet unplugged, etc.) and receives a different IP address than when Unraid first booted, then the mDNS and TLS certificate are not bound to the new IP address. This is not usually a problem, as I have DHCP static IP assignment set up on my router. But this can occur if I'm changing that IP assignment, for example, and reboot the router to have it assign the new IP. Or I've also seen it where the NIC f

On the last few revisions to 6.11 there seems to be a bug related to stored browser cache. If a user attempts to start an array (in this case with keyfile based encryption) this pop-up dialog emerges once the array starts. If the user selects resend Unraid will go into a stale configuration error mode and requires a reboot to address. Clicking cancel allows the webui to refresh and all is well.   Is there an option to disable or prevent locally storing webui cache? Being a local or lan

Currently if the log file grows (perhaps through some error) to fill the flash drive, the webgui becomes unresponsive, IMHO, this is a bug.   Normally, the way this is handed is by a line in the log file that says something like >XXX lines similar to ZZZZ rather than expanding to fill all available size, alternatively, truncating part of the log file.

In the "SHARES" window i have many shares and it's very difficult to see the names. 80% of the shares names are un-readerable because of the truncations. I thought this was going to be fixed in 6.10, I am running 6.11.5.?  

I couldn't find a thread on this forum regarding this issue but I see countless people in many forums stating UnRaid reports their Samsung SSD's running hot when they aren't. I have this same issue. My notifications are flooded with "cache drive over temp....cache drive returned to normal....cache drive over temp....cache drive returned to normal...." and it takes a while to clear all those notifications out. There are so many of them I can't even cypher through them to find any notifications re

Hi guys,   I got a couple of freezes/crashes of my server.   i found some kernel panic form syslog.   can anyone help me to solve this problems?   sol.log sol.log sol.log syslog-192.168.31.22.log syslog-20221211-164036.txt tower-diagnostics-20221211-1640.zip syslog.zip

May 20 17:57:24 Tower kernel: serial 0000:05:00.2: Couldn't register serial port c400, irq 37, type 0, error -28   May 20 17:57:24 Tower mcelog: ERROR: AMD Processor family 23: mcelog does not support this processor. Please use the edac_mce_amd module instead.   May 20 17:58:00 Tower kernel: pci 0000:05:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update   Any clarification/help on what these problems

Upgraded from 6.9.2 to 6.11.5 this morning.  Everything is working as expected with the exception of my docker icons.  Clicking on dashboard or refreshing the page makes docker icons disappear, clicking on dashboard again or refreshing the page makes them come right back.    This happened consistently...  Zero impact on the containers themselves, everything is humming along as it was prior to the upgrade.     When the icons disappear syslog dumps this;  

6.10.3 EMHTTPD: READ SMART KEEPS DISKS SPIN UP. The hard driver was can sleep at 6.9.2, but after upgrade 6.10.3. the disk can not be sleep anymore. I check its because READ SMART KEEPS DISKS SPIN UP.    

I cant see any Files and Folders on my Oppo BR Player on my unRaid 6.11.0 NFS Share. because i cant add any Credentials on this Player i assume the rights for "other" is relevant, so i set them to rwx for testing. The Files are Showing up perfectly on my 6.9.2 unRaid Server.   i had the same issue on my TrueNAS Server, i was able to open/connect the share but cant see anything in it. The Fix was to set the ACL for "everyone" to "read" (everyone wasnt in my ACL and i needet to

Seems there is no formal report for this:  Just encountered it on current 6.11.5.   - Stop VM service - Start it again - You get something like    Dec 19 21:13:20 Unraid emhttpd: shcmd (1167849): /usr/local/sbin/mount_image '/mnt/user/system/libvirt/libvirt.img' /etc/libvirt 1 Dec 19 21:13:20 Unraid root: '/mnt/user/system/libvirt/libvirt.img' is in-use, cannot mount   mount shows no references to libvirt.img. Mounting libvirt.img to a random folde

on 6.11.3 mac os vm was ok. on 6.11.5 i am receiving error:   Execution error internal error: qemu unexpectedly closed the monitor: 2023-01-12T09:13:06.874065Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16] 2023-01-12T09:13:06.874067Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17] 2023-01-12T09:13:06.874070Z qemu-system-x86_64: warning: host doesn't support requested fea

I have 2 unraid servers, both running 6.11.5 connected locally via a ubiquiti switch and 10g ethernet.  I have the media shares mounted via NFS on both servers via the unassigned devices plugin.  I have noticed every few days though that the shares seem to disconnect?  It is weird though, dockers can continue to use the share, so like Plex still has access, but if I restart a docker that uses that share, it will fail and I will need to unmount and mount the share again.  I am attaching my logs a

Good morning all,   I went through the first page of the stable releases, and I don't see anyone reporting issues with their VM's. Since upgrading to 6.11.1 my windows 11 for some reason keeps crashing. When i looked at the logs for the machine, i can see the below:   text  error  warn  system  array  login   -device '{"driver":"vfio-pci","host":"0000:02:00.0","id":"hostdev2","bus":"pci.6","addr":"0x0"}' \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,res

Screen shot shows it started   Tried to SSH in and failed connection   Checking via web terminal it isn't running   tried starting by hand via the rc script and it started without issue and works just fine   Based on my past experience, my guess is either the config wasn't written yet (to unionfs or whatever you are using) or something else.  There isn't any logging so no clear way to debug.  

unas-diagnostics-20230107-1639.zip When trying to update from 6.10.3 to 6.11.5 Unraid will only run in GUI Mode. When I don't select GUI mode on the boot screen it just sends my server into a boot loop. This has happened every time i've tried to update to a 6.11.x release and i've just been reverting back to 6.10.3 with no issues after doing so.

I just upgraded to 6.10.3 from 6.9.3 last night and am getting a temp warning for the pulling interval on my Samsung 980 Cache drive saying its at 84C it will go from 44C to 84C in 10 seconds and back again. I changed to pulling interval to 10 seconds to watch the behavior.  I believe this is a bug I have also found many post on this forum and reddit about this as well. Any guidance would be appreciated. Thank you. diagnostics-20220622-0902.zip

Hello, Version: 6.11.5 System has no parity drives at all.   The green icon saying that "all files are on protected storage", but is Cache-Only share on RAID0 Its the least protected there is     12700-diagnostics-20230104-0501.zip