Stable Releases

So it looks like there is a bug with the telegram notifications in unRAID.    Once you input the TOKEN it's supposed to fetch the CHATID, this did not happen to me when I upgraded to 6.7.  It sat there for 24 hours, doing nothing.    Not until i created a "/boot/config/telegram/chatid" file manually and populated it with the 9 digit chat id, did it work. 

I just updated to the latest version and lost the web UI remotelly.   The shares still work fine, no issues there, but if I try to access the WebUI then the browser just keeps loading without ever getting a response.   If I reboot the server in GUI mode, it works fine on the local machine, so it is only remotelly that the issue happens.   I don't think it is network related since shares work fine and I can ping the machine fine too. I tried to access the webUI

Afternoon,   I have a strange issue where if I select a disk, on its properties page it shows "Unavailable - disk must be spun up", specifically:     The disk is already running so isn't spun down.   Clicking "Spin Up" does nothing but the logs show the attempt.     I've found a few reports of this going back pretty far so looks like its a pretty long standing bug. Anything I can do to help nail it down let me know!

The release notes show that only docker changed from 6.6.6 to 6.6.7, but AFP hasn't worked for me since the upgrade. Mar 23 15:35:26 Tower emhttpd: req (5): shareName=media&shareExportAFP=e&shareVoldbpathAFP=&shareSecurityAFP=secure&changeShareSecurityAFP=Apply&csrf_token=**************** Mar 23 15:35:26 Tower emhttpd: Starting services... Mar 23 15:35:34 Tower afpd[25355]: =============================================================== Mar 23 15:35:34 Tower afpd[2

Just a quick report to say that the displayed value for motherboard temp displayed on the updated dashboard is displaying Fan1 speed with rpm.

I'm having issues with the GUI after updating to 6.7.0  from the previous stable release

see In my case Linux Mint VM is not seeing any USB 2.0 ports and cannot save config with 3.0 (nec XHCI) or 3.0 (qemu XHCI). Get error:  

Successfully precleared a hard-drive using PreClear 2019.03.10 Assigned drive to disk array and INSTEAD of it becoming an active member of the array, unRAID began a (another) clearing process! (This will now be running for days, defeating the purpose of it being precleared before adding the drive to the array.) Note: Have previously precleared drives in the same fashion (drives used in the current array), without an issue.   tower-diagnostics-20190429-2332.zip

So this is very annoying. Up until now I have been able to circumvent this issue, but now the bug is critical. In the attempt to resize a vDisk and resizing the partition in Manjaro. Upon reboot the VM boots into grub rescuer. "unknown filesystem"   Regardless if I choose English or my native layout for VNC, the characters are not where they are supposed to be. I can find the odd positions of some characters like "(" looking at pictures of an English layout but either "/" or "=" w

Hello, unraid is not able to detect any network on my HP DL980 G7, can you help me out please. syslinux.cfg

Just setup unRAID on my system with a Ryzen 5 1600 but for some reason it freezes and requires a hard reboot past like 4 hours. It timeouts any request to the webui and the terminal on the connected monitor is unresponsive. apollo-diagnostics-20190430-0719.zip

Using Unraid 6.6.7 I have 2 shares, "downloads" and "media". Files that have finished downloading are written to a directory, thats checked for changes by a FileBot container. It then renames and moves the files to their respective directory in the media share. I used to have caching enabled for the media share, but recently decided it was better to have these files written to the array directly. For some reason however, FileBot still leaves these files on the cache drive, instead of

I was attempting to change the hostname of the container and instead of --hostname used --name   When I put --name in the extra arguments and updated the container, the container could not be edited. The option was removed from the container.   Deleting and recreating the container was the fix.

6.6.7 Linux guest, either Ubuntu 18.10 or Fedora 30 beta. Doesn't matter if I use i440 or Q35.   I pass my AMD RX580 to a Linux guest and it works great. But if I reboot or shutdown that guest VM then I can't start it again without rebooting the host machine. Sometimes it'll say "Unable to power on device, stuck in D3" in the logs and sometimes I'll get a pop-up about an error "Unknown PCI header type 127".   It's the same error and it's preventing me from purchasing Unr

Anyone having issues in 6.6.6 and 6.6.7 regarding launching a docker container imported from dockerhub?   When I try to launch the container to start it stops after 1sec. Here are the logs: Apr 16 14:08:03 Tower kernel: eth0: renamed from vethe02dce5 Apr 16 14:08:03 Tower kernel: device br0 entered promiscuous mode Apr 16 14:08:04 Tower kernel: device br0 left promiscuous mode Apr 16 14:08:04 Tower kernel: vethe02dce5: renamed from eth0 There are no other logs when launching the

This issue does not appear if the network is not stressed enought, but now I have 11 VM's running on this machine all with a preety large amount of traffic on the network and once at several hours this undefinitelly hang of the eth0 appear.   Sometime the this issue can be fixet wit a network restart, but sometime only with restart.   The kernel log is:   Mar 31 06:24:59 Tower kernel: e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang: Mar 31 06:24:59 Tower ker

Hi,   Because there was no help in the Docker Engine Threat I think its kind of an issue. Its for 6.6.7 and before.   I am playing around with IPv6 which I am a big fan of. I know that you can see the IPv6 with "docker list network" but I would like to have a fix self setted IPv6.   With Exrtraparameter --ip6 '2ac2:8954:4a1:fe60::ad58' you can have it but only for the time that you recreate that docker.  If you just start the docker with Systemstart / rebo

so, have been running minecraft for a while in a docker with no issues, however just tried to enter it and not running,  so looked at dahboard to find this.. woulld add as zip but unablle to as the server locked up. have tried rebooting but nothing happening now.   any ideas ?? many thansk   Mar 23 17:20:29 DeathStar kernel: BTRFS info (device loop3): read error corrected: ino 0 off 699817984 (dev /dev/loop3 sector 1383216) Mar 23 17:20:29 DeathStar

The issue is caused by the notification empty container laying over the button which makes the button almost impossible to click. Suggested solution: apply css display: none property when empty.

Hello everyone, I have already reported a similar problem in version 6.6.4. My Shares were not accessible after a certain time, often within 24 hours. The problem was fixed in version 6.6.5 and then reappeared in version 6.6.6. I was waiting for version 6.6.7 to check if the problem still persisted and it still. Here in the logs where I think there is a problem: Feb 27 03:40:01 Tower kernel: shfs[2255]: segfault at 0 ip 0000000000402722 sp 000015511c8088f0 error 4 in shfs[400000+f000] Feb

Woke up in the morning to find an unraid error stating the notifications were disabled. The VMs are on and running, but unraid shows them disabled. I cannot seem to access shares, or do anything that I can think of to fix this other than reboot.   I checked the logs and they are spammed over and over with this.   ErrorWarningSystemArrayLogin Mar 14 15:34:39 Tower emhttpd: error: put_config_idx, 609: No such file or directory (2): fopen: /boot/config/shares/nextcloud.cfg Mar

Hi,   First I must say that I really enjoy using Unraid, I think it is amazing peace of software that solves A LOT of my problems, and I have been searching for it for years.    As the title says, share "media" is set to not use the cache, but files do exist on the cache drive itself. People helped me and on this post explained that this is a linux thing, that occurs if I have some data on "cache-only-share" (cache set to Yes) and I move it over the network to some other "no-

This issue never happened before v6.6. I have decided to re-create all my VMs just in case.   I receive this error below when I try to apply USB 3.0:   These are my default settings that work with USB 2.0:   USB 3.0 controller setting that doesnt work:   XML File: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='1'> <name>Windows 10</name> <uuid>184700bc-5563-7f04-a7d2-ebffe7e1cd1c</uuid>

Hello all,   I have my iTunes media stored in a folder on an Unraid share (array not cache). iTunes reports some 300GB of music. However if I right-click Get Info on this folder I get a 4.7TB folder size. This is only in macOS, krusader docker image on Unraid for example reports correct folder size.   I also used DaisyDisk macOS app to calculate the folder size, this one also reports incorrect size. Drilling down to see what takes up so much space I get the folder "Compilatio

When running 6.6.6 I got all movie metadata. Running 6.6.7 I got no movie metadata. Upon rolling back to 6.6.6, got the metadata again.   tower-diagnostics-20190309-1347.zip