SimonF

The GPU does not seem to gave any drivers. I would expect. 04:00.0 VGA compatible controller: Intel Corporation Battlemage G21 [Arc Pro B50] Subsystem: Intel Corporation Device 1114 Kernel driver in use: xe Kernel modules: xe What does dmesg | grep xe show.

Go into gpu stats settings, remove the GPUs, apply then add the back in and apply to see if that fixes. Also run lspci -k to check the gpu is using xe.

Yes all devices can fail. If it is a mirrored pool it is a standard disk replacemnet. Single woud have more steps that a flash.

The reason for internal boot is many user have requested an option to boot from a non usb flash drive due to the potential of them failing. Myself I ran the same usb since I purchased in 2017 only changed because it was too small. The internal boot pool does support redundant drives so will still run if one of them fails an you can just swap in a new one.

Thanks for the feedback, the level of drivers in this initial release needed to be fixed. Dedicated support is not complete in this initial release. There can be a while where it sits on blank screen before Loading.... is shown, this is done to the read speed of the the media. Flashing may be related to drivers also. Next version should have more current drivers. I am working on automated build chain currently so will be looking to have a new release in a few weeks.

@T_Matz @Dazog @jtaz16 I will be looking to see if https://crates.io/crates/qmassa provide enought output as a json file to import into GPUs stats. NVTop is interactive and does not provide a json output but qmassa does. I hope I may have a test version before the end of April subject to other workloads.

You need to set the card to be ignored by the i915 driver and enabled in the XE on 7.2.x =! disables

Yes only 3 PCI slots, X4 has the dual 10G. Red rj45 is the 2.5g black is the BMC

We are working with 45Homelabs and gigabyte to see if we can get manual codes so I can update.

Yes I did libvirt.org/hooks.html Yes I think it may be easier in bash if you don't know PHP, there are ways to execute shell cmds in PHP.

Here is a link to the hooks documentation, but dos not look like one for the VM being paused.

You cannot put bash into PHP. But you can add additional scripts here ls /etc/libvirt/hooks/qemu.d/ ArcReset Notify* Savehook USB_Manager* VMTest savehook.php* Note if the script hangs then the VM process will hang.

Will try and look into this week but maybe next.

Yes as there is not key file, you may need to copy from the flash if that is licensed. I am adding more drivers to the build so SCSI drives work and more network cards should be found.

10.2 was not released when the internal betas started. I will review with the team to see if we can bump the release.

Here is the faq. https://docs.unraid.net/unraid-os/troubleshooting/tpm-licensing-faq/ For a VM you will need to pass thru a usb for the guid to use with standard license like you would have done previously. There does not need to be anything installed on the device, it just needs to have the UNRAID label for the device.

You can run a mirrored pair of drives, hence zfs.

Same as the flash

You need to have usb device with a Unique GUID connected to the VM for license. TPM license is not supported under VMs

There is no tools to provide but I am looking at options.

Are you doing it on a mobile device, if on PC home button will take you to the top.

That will check the status and update is there are pending updates

Do you have plugin notification update set in notifications?

You can do key replacement the same as usb swaps. Nothing is stored in the tpm

Hi All, with bringing Internal boot to 7.3 I have been working on a new test(beta) installer which allows you to create a single drive internal boot disk from a bootable usb or iso. NOTE this is for clean new installs not for upgrades. The installer also will allow you to create an Unraid USB Flash drive from the device you have just booted from. The files are available from here: iso: https://drive.google.com/file/d/1WDfQ2maaS4RKpffOsc-8pO9tcEi5VwpA/view?usp=sharing img: https://drive.google.com/file/d/1jrvumnD8wit_NCkUMZfzKWYTaYRtnDyP/view?usp=sharing To use the img you will need to create a bootable usb. You can use rufus but you need to select dd mode or if running from linux sudo dd if=builds/install-user-minimal.img of=/dev/sdX bs=4M status=progress conv=fsync where sdx is the usb Both don't have any zip files stored in them so you need to download the zip first. Then you can create an Internal boot or flash. The may be a version that has a zip inbedded also. So if you have a spare test environment and you want to try it out please do and provide feedback. It has so rough edges but is functional. You will get the same grub boot page before the menu. You can test with a VM using the ISO as a CD.