shiftylilbastrd Posted July 27, 2021 Share Posted July 27, 2021 Sorry folks, been out in the woods for a bit. Ya'll get this sorted yet? Quote Link to comment
Karoolus Posted July 28, 2021 Share Posted July 28, 2021 Container refuses to connect for me, I saw the open issue on Github https://github.com/bubuntux/nordvpn/issues/227 No idea what to do now, I have several other containers running through this NordVPN container so those are all not working now either. ( I wouldn't have those running without VPN anyway, my ISP is too curious haha ) Quote Link to comment
r4ng3r Posted July 28, 2021 Share Posted July 28, 2021 24 minutes ago, Karoolus said: Container refuses to connect for me, I saw the open issue on Github https://github.com/bubuntux/nordvpn/issues/227 No idea what to do now, I have several other containers running through this NordVPN container so those are all not working now either. ( I wouldn't have those running without VPN anyway, my ISP is too curious haha ) I am having the same issue. No problem connecting via another device. Advise will be appreciated. Quote Link to comment
mapa92 Posted July 28, 2021 Share Posted July 28, 2021 (edited) Anyone else having problems with getting stuck in "Connecting..."? It appears that a VPN connection is still established successfully, as when I route all traffic from a Firefox Docker through the NordVPN container and visit https://nordvpn.com/de/what-is-my-ip/ it tells me that I am protected and the IP address and the geolocation differs from my actual ip address/location. Though if I manually specify a preferred server (CONNECT), then no docker container is connected to the Internet (as I enabled KILLSWITCH). Edited July 28, 2021 by mapa92 typo Quote Link to comment
Stoffel324 Posted July 28, 2021 Share Posted July 28, 2021 I have the same issue, stuck on connecting. Quote Link to comment
Muath Posted July 29, 2021 Share Posted July 29, 2021 Try to change the protocol to "openVPN" instead of NordLynx Quote Link to comment
mapa92 Posted July 30, 2021 Share Posted July 30, 2021 On 7/29/2021 at 1:39 PM, Muath said: Try to change the protocol to "openVPN" instead of NordLynx Did not help, still stuck on "Connecting..." 😕 Quote Link to comment
Muath Posted August 2, 2021 Share Posted August 2, 2021 21 hours ago, mapa92 said: Did not help, still stuck on "Connecting..." 😕 Yes last line in the logs should be "Connecting...", but it will work Quote Link to comment
Karoolus Posted August 3, 2021 Share Posted August 3, 2021 Mine is stuck on connecting but works (where it didn't before) The container dies every now and then though. sometimes it takes an hour, sometimes 3 days Quote Link to comment
mapa92 Posted August 3, 2021 Share Posted August 3, 2021 Yes I can confirm that it works although it shows "Connecting...". But this is not the expected behaviour is it? Nevertheless, at least it does work :D Quote Link to comment
Baby_Shark Posted August 16, 2021 Share Posted August 16, 2021 On 7/13/2021 at 12:30 AM, Renaldo said: @shiftylilbastrd so here are my current settings, my default was 8080 but i have sinced changed it to 8113. i believe everything is connected as it should be i just can't access the webui, i'm copying the link directly from qbit settings into my browser and getting "address took too long to respond". i appreciate all of your help and time reading through this so far. Still having trouble with this? It looks to me like you changed the container port for qbitttorent. I am using hotio's docker template, but should be similar for you. qbitttorent's container typically uses port 8080. This port is already occupied on my setup, so I modified it to 8089, but you need to leave the container port as 8080. See attached screenshot. Then in the nordvpn container you have to map the host port 8089 to container port 8080. See attached. You should then be able to access the webui by using unraid's ip and port 8089. You can verify traffic is being routed through the nordvpn container by bashing into qbittorent and using curl ifconfig.io. Quote Link to comment
dellorianes Posted August 17, 2021 Share Posted August 17, 2021 Hi, I am having a problem at the moment of setting up Oscam container, running through nordvpn app. When I try to define the container ports in Oscam docker, I can not map 9000 (dvbapi port, needed by tvheadend to connect with it). Running Oscam alone (custom network), port 9000 is mapped correctly, but when running through nordvpn it does not appear mapped in unraid docker´s webpage. Only 8888 (webui) appears as mapped 🙂8888/TCP <->:8888). I have also JDownloaded setup to connect through nordvpn with 3 different ports openned with no issues. Any idea? Quote Link to comment
Baby_Shark Posted August 17, 2021 Share Posted August 17, 2021 8 hours ago, dellorianes said: Hi, I am having a problem at the moment of setting up Oscam container, running through nordvpn app. When I try to define the container ports in Oscam docker, I can not map 9000 (dvbapi port, needed by tvheadend to connect with it). Running Oscam alone (custom network), port 9000 is mapped correctly, but when running through nordvpn it does not appear mapped in unraid docker´s webpage. Only 8888 (webui) appears as mapped 🙂8888/TCP <->:8888). I have also JDownloaded setup to connect through nordvpn with 3 different ports openned with no issues. Any idea? If it does not give you the option to map both the container and host port, try turning on Template Authoring Mode. Go to settings --> docker -->enable docker = no-->apply. Then turn on Template Authoring Mode and start docker back up. Quote Link to comment
dellorianes Posted August 18, 2021 Share Posted August 18, 2021 (edited) 16 hours ago, Baby_Shark said: If it does not give you the option to map both the container and host port, try turning on Template Authoring Mode. Go to settings --> docker -->enable docker = no-->apply. Then turn on Template Authoring Mode and start docker back up. Sorry, I am not undestanding, what do you mean with start docker back up? If it means "enable docker", I tryed but everything continues the same. only :8888 showed as mapped. Edited August 18, 2021 by dellorianes Quote Link to comment
dellorianes Posted August 20, 2021 Share Posted August 20, 2021 On 8/19/2021 at 1:16 AM, SimpleDino said: @Zotarios Just like some of the people here I can not access the webui of the docker that has been routed through the NordVPN container. NordVPN - NordLyx: Works fine, Confirmed it via console and getting correct ip for specific country requested in template (even though logs show at the end ...connecting...) Lidarr with port :8685 - network type has been set to None and extra parameter to --net=container:nordvpn NordVPN - Lidarr port 8686 has been added (also tried setting requested to yes but to no veil) trying to access webui with [UnRAID IP]:8686 but still no success Followed these step per SP1's instruction but can't any to work! Need help solving this? A follow up question, is it possible to download in speedtest-cli in the container? if yes, then what linux command should be used here? because sudo doesnt work and this is not an archlinux so no pacman. Does Lidarr container show the port :8686 mapped in unraid docker webpage? Quote Link to comment
evertinker Posted August 25, 2021 Share Posted August 25, 2021 On 8/20/2021 at 12:07 PM, SimpleDino said: Yes, it does. I had the same problem and finally realized I wasn't reading the nordvpn container's NETWORK variable closely enough (under 'more settings'). The default LAN it specifies is 192.168.0.0/24 and my LAN is 192.168.1.0/24 As soon as I changed it I could access lidarr through the web ui. I hope this easy change works for you too! 1 Quote Link to comment
evertinker Posted August 25, 2021 Share Posted August 25, 2021 14 minutes ago, SimpleDino said: Okay, then that means I have to add a route (192.168.1.0/24) in network settings - Route settings, correct? if the connecting is up! I just changed it in the nordvpn docker config like shown in my screenshot. Click on 'Show more settings' and if the IP range listed on the 'LAN net' section doesn't match your server, change it to the correct one. If it already matches, then you have a different problem and my fix won't help. Quote Link to comment
dellorianes Posted August 26, 2021 Share Posted August 26, 2021 (edited) On 8/18/2021 at 2:03 PM, dellorianes said: Sorry, I am not undestanding, what do you mean with start docker back up? If it means "enable docker", I tryed but everything continues the same. only :8888 showed as mapped. Any idea about this? I have also tryed creating both nordvpn and oscam containers using docker-compose (both in the same .yml file) but it results in the same issue. Only mapping in the .yml file the ports 8889 and 9000; nordvpn is creating correctly (with this both ports) but oscam container is created only with port 8888 (even when I haven't created it as an ENVIRONMENT variable) It seems like the container is primary builded and the image only accept port 8888 in this network mode. Edited August 26, 2021 by dellorianes Quote Link to comment
hhinma Posted August 27, 2021 Share Posted August 27, 2021 Im also having problems getting the container to do anything, I am assuming I am missing something obvious. Authentication fails. Based on the container template description, I used my email as username and the corresponding password. This failed. I then tried the "manual configuration" credentials from the NordVPN web site, which also (perhaps not surprisingly) failed. I then reset the login credentials and used those, which also failed. Can you provide guidance on debugging this? Quote Link to comment
matty2k Posted August 27, 2021 Share Posted August 27, 2021 On 8/25/2021 at 3:05 AM, evertinker said: I had the same problem and finally realized I wasn't reading the nordvpn container's NETWORK variable closely enough (under 'more settings'). The default LAN it specifies is 192.168.0.0/24 and my LAN is 192.168.1.0/24 As soon as I changed it I could access lidarr through the web ui. I hope this easy change works for you too! OK. Thanks for sharing. Helped me to solve the problem. Was looking a long time for a solution now. The setting should not be on Advanced settings => should be on top of Basic settings. However .. sabnzbd is now working like hell with nordvpn and nordlynx protocoll. Quote Link to comment
ibasaw Posted August 27, 2021 Share Posted August 27, 2021 got same issue [2021-08-27T14:37:47-04:00] Firewall is up, everything has to go through the vpn [2021-08-27T14:37:47-04:00] Enabling connection to secure interfaces [2021-08-27T14:37:47-04:00] Enabling connection to nordvpn group [2021-08-27T14:37:47-04:00] Enabling connection to docker network [2021-08-27T14:37:47-04:00] Enabling connection to network 192.168.0.0/24 [2021-08-27T14:37:47-04:00] Restarting the service [2021-08-27T14:37:47-04:00] Waiting for the service to start [2021-08-27T14:37:47-04:00] Logging in [2021-08-27T14:38:48-04:00] Invalid Username or password. Quote Link to comment
evertinker Posted August 27, 2021 Share Posted August 27, 2021 9 hours ago, matty2k said: OK. Thanks for sharing. Helped me to solve the problem. Was looking a long time for a solution now. The setting should not be on Advanced settings => should be on top of Basic settings. However .. sabnzbd is now working like hell with nordvpn and nordlynx protocoll. yea I agree, if the NETWORK variable was more visible it would probably avoid a lot of confusion. Glad to hear you got it working! Quote Link to comment
likwid Posted August 29, 2021 Share Posted August 29, 2021 Using Zotarios' Repository that pulls from bubntux on dockerhub The container works great if I use "bridge" for my network type. However, if I use "custom: br0" the number of connections shown in my router spikes to 43 and I get the attached error in my logs. In reviewing the problem I found that this issue was raised here ( https://github.com/bubuntux/nordvpn/issues/91 ). The issue is closed but the last comment points to issue 139. I'm hoping that others have found a solution to getting this image to work on custom as I'd like to assign it an IP and route traffic through it. Quote Link to comment
tiny-e Posted September 4, 2021 Share Posted September 4, 2021 (edited) I'm also getting login issues. Seemingly no matter what I do, I get Invalid Username or password OpenVPN or NordLynx, changed my password, changed it again to eliminate any special characters. No idea... Edited September 4, 2021 by tiny-e crummy WYSIWYG editor... Quote Link to comment
likwid Posted September 4, 2021 Share Posted September 4, 2021 It appears that custom networks don't work with bubuntux's image: https://github.com/bubuntux/nordvpn/issues/238 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.