MvL Posted June 8, 2018 Share Posted June 8, 2018 (edited) Hi I have a LSI 9207-8i. How do I upgrade this card? Is there a guide? Has anybody upgraded this card before? Edited June 8, 2018 by MvL Quote Link to comment
BobPhoenix Posted June 10, 2018 Share Posted June 10, 2018 On 6/8/2018 at 10:20 AM, MvL said: Hi I have a LSI 9207-8i. How do I upgrade this card? Is there a guide? Has anybody upgraded this card before? What problems are you having that causes you to need to update? I normally only update firmware if I'm having problems. Updating can CAUSE problems so I don't update unless I have to. Quote Link to comment
Fireball3 Posted June 12, 2018 Share Posted June 12, 2018 On 6/7/2018 at 1:47 PM, 666gene said: Hey guys New User here. Just purchased the Controller Below. https://www.newegg.com/global/au/Product/Product.aspx?Item=9SIA4A05M20945 Just confirming the guides is still valid as zip files are from 2011 While the guide is valid, the files are probably outdated. Either grab them from the Broadcom site (look for P20.00.07.00) or grab the Dell Perc H310 package. Read the instructions. The resulting file should indicate the present firmware, maybe you don't even need an update. In case you do, you need only step 5_lsi_P20 and maybe step 6. Quote Link to comment
Fireball3 Posted June 12, 2018 Share Posted June 12, 2018 On 6/6/2018 at 9:28 PM, speatzle_ said: After a lot of digging i found out that they were using the Lsi sas1068e chipset and coud be flashed to it-mode This one is not working? Quote Link to comment
Fireball3 Posted June 12, 2018 Share Posted June 12, 2018 On 6/8/2018 at 5:20 PM, MvL said: Hi I have a LSI 9207-8i. How do I upgrade this card? Is there a guide? Has anybody upgraded this card before? This card is a plain HBA. Firmware is available in that place and instructions should be there also, if you need more assistance, feel free to ask. Quote Link to comment
MvL Posted June 17, 2018 Share Posted June 17, 2018 On 6/12/2018 at 4:58 PM, Fireball3 said: This card is a plain HBA. Firmware is available in that place and instructions should be there also, if you need more assistance, feel free to ask. Much, much appreciated!!! When I can find some more time I try to flash the card. When I have more question I report back. Quote Link to comment
666gene Posted June 22, 2018 Share Posted June 22, 2018 Legend. Thanks yeh the card arrived today and on further research iv got the info i need appreciate the reply! If everything goes to plan is there anywhere i can write feedback on my experience with the card and unraid to help the community? Quote Link to comment
M4ST3R-OWNER Posted June 24, 2018 Share Posted June 24, 2018 On 6/12/2018 at 9:58 AM, Fireball3 said: This card is a plain HBA. Firmware is available in that place and instructions should be there also, if you need more assistance, feel free to ask. I just got the same card I believe. Ordered from eBay and I did decide to try it out after looking in bios it was indeed it mode. I changed boot support to disable. And everything is working like normal. very impress with this little card and this speeds. If I ever felt the need to update are their any how to? 1 Quote Link to comment
speatzle_ Posted June 24, 2018 Share Posted June 24, 2018 On 6/12/2018 at 4:47 PM, Fireball3 said: This one is not working? yes Quote Link to comment
Fireball3 Posted June 25, 2018 Share Posted June 25, 2018 11 hours ago, speatzle_ said: yes Yes, it is working or Yes, it is not working? Have you already found this? Quote Link to comment
pepar Posted June 25, 2018 Share Posted June 25, 2018 8 hours ago, Fireball3 said: Yes, it is working or Yes, it is not working? Quote Link to comment
speatzle_ Posted June 25, 2018 Share Posted June 25, 2018 11 hours ago, Fireball3 said: Yes, it is working or Yes, it is not working? Have you already found this? Sorry wasent clear. that did not work for me. I have already seen that link but thanks Quote Link to comment
Lorien Posted June 30, 2018 Share Posted June 30, 2018 (edited) Hello! I got through Jonny's Guide and Flashed my Fujitsu d2607-a21 properly however I never got he 2nd port Working even when I redo the megarec -writesbr 0 SBR-A21.bin Is there someting else to be aware with this card. Here's the link to the Actual card I got on ebay: https://www.ebay.ca/itm/Fujitsu-9211-8i-D2607-LSI-2008-SAS-SATA-RAID-controller-RAID-0-1/173311028878 Edit: It worked after a 3rd try. Got both port working, I'd recommend that card on ebay very good price. Edited June 30, 2018 by Lorien Quote Link to comment
Oldtimer Posted July 18, 2018 Share Posted July 18, 2018 (edited) Hello! I just flashed my LSI 9207 4i4e and managed to wipe the SAS address with -e 7. Problem is i have no idea what to tell it to use as address from now on. Does anyone have an idea of what i should tell it to use? Is this address like a MAC address for a network card and unique? Is it model based or is it something the user can set to whatever they like? Edited July 18, 2018 by Oldtimer Quote Link to comment
Fireball3 Posted July 19, 2018 Share Posted July 19, 2018 Hi @Oldtimer, welcome to the unRAID forums. See this post. Quote Link to comment
Oldtimer Posted July 19, 2018 Share Posted July 19, 2018 (edited) Thanks @Fireball3! That did the trick. I think i should mention that the new/updated EFI version of the tool that i used had slightly changed parameters. Old: -o -sasaddr <address here> New: -o -sasadd <address here>: Note the missing r on parameter and trailing : after, i dont know if the old syntax had the trailing one. Edited July 19, 2018 by Oldtimer Quote Link to comment
Fireball3 Posted July 19, 2018 Share Posted July 19, 2018 The correct syntax, according to the manual, is: -o -sasadd 12344567890 Quote Link to comment
pepar Posted July 19, 2018 Share Posted July 19, 2018 Can this card be flashed back to IR mode from IT mode? Quote Link to comment
Fireball3 Posted July 20, 2018 Share Posted July 20, 2018 9207 is an HBA, that means, sold in IT mode. The download page suggests it can be flashed to IR mode though. The equivalent card in IR mode is obviously called 9217 \firmware\HBA_9217_4i4e_IR\9217-4i4e.bin Quote Link to comment
ghiglie Posted July 22, 2018 Share Posted July 22, 2018 Just reporting back a plain success. Just cross flashed an M1015 to 9211-8i firmware P20, with BIOS and EFI BSD.Now I have two more cards to play with, another M1015 and a Br10i. Inviato dal mio SM-A530F utilizzando Tapatalk Quote Link to comment
pepar Posted July 23, 2018 Share Posted July 23, 2018 On 7/20/2018 at 3:36 AM, Fireball3 said: 9207 is an HBA, that means, sold in IT mode. The download page suggests it can be flashed to IR mode though. The equivalent card in IR mode is obviously called 9217 Sorry, I was too vague. My contact is the SAS9211-8i. But I see that’s the flashing can go both ways. Thanks. Quote Link to comment
Leandro Posted August 2, 2018 Share Posted August 2, 2018 On 03/05/2011 at 19:46, madburg said: Chipset LSI SAS1068E 1) LSI SAS 3081-R 2) IBM BR10i 3) Intel SASUC8I Por favor, deixe-me saber (PM ou postar aqui) o cartão que você conseguiu com sucesso com o chipset LSI SAS1068E com o zip fornecido FW: 1.32.00.00, BIOS 6.34.00.00 / 20-DEC-10 (LSI P20) Ambos os modos IT / IR disponíveis Controladores LSI SAS1068E (P20) .zip - 3,8 MB (Windows) Controladores LSI SAS1068E (P20) Linux.zip - 4.5 MB (unRAID) FW: 1.33.00.00, BIOS 6.36.00.00 / 22-AUG-11 (LSI P21 ) Ambos os modos IT / IR disponíveis Controladores LSI SAS1068E (P21) .rar - 1.46 MB (Windows) Controladores LSI SAS1068E (P21) Linux.rar - 2.02 MB (unRAID) Driver Linux : MPTSAS - suporta os chipsets LSI SAS1064, SAS1064A, SAS1064E, SAS1066, SAS1068, SAS1068E e SAS1078. (Obrigado ao post anterior do "BRiT") Suporte unRAID : Adicionado a partir de 5.0Beta6a Drive Spin Down Support : SIM ( ATUALIZAÇÃO: adicionada a partir de 5.0Beta7 ) Leituras temporárias da unidade : SIM 3TB Drive Support com este cartão : Oferecerá apenas 2,2TB de 3TB ( ATUALIZAÇÃO: mesmo que 5.0Beta7 tenha adicionado suporte a 3TB Drive, esta placa NÃO suporta drives de 3TB, ele só vê e usa 2.2TB de uma unidade de 3TB ) *** Nota: Múltiplos controladores todos postam sob um MPTSAS Bios, existem configurações globais que afetam todos os controladores e configurações individuais por controlador disponíveis *** It worked perfectly on the Dell PE 2900. I just can not change the order of the boot disks. Thanks! Quote Link to comment
skunkworker Posted August 10, 2018 Share Posted August 10, 2018 A note for someone who has the same issue, the LSI SAS HBA 9201-8i uses the same firmware as the 9210-8i NOT 9210-16i. To update download the sas2flash program from https://lime-technology.com/wiki/Crossflashing_Controllers#LSI_SAS2116_chipset and then download https://docs.broadcom.com/docs/12350504 which after unzipping will give you 2108it.bin. Quote Link to comment
MiauwMaster Posted August 15, 2018 Share Posted August 15, 2018 HI, I'm relatively new to server-grade equipment, I got an old HP DL380G5 with a P400 Raid controller. I've been looking to flash it as it is just a LSI SAS 1078 chipset and I see a few times on here saying a Linux driver supports the chipset (1068E and SAS2008). Does this mean I can flash my card with either of these firmwares or am I just wrong and can't I flash this card at all? Sorry if it's a bit of a noob question but I'd rather not just try and find myself with a bricked card. Also I have been browsing this thread for a solution to this, but as there are 60+ pages I may have read over the solution, If this is true, please point me to what I need and call me an idiot ;) Kind regards Quote Link to comment
uldise Posted August 15, 2018 Share Posted August 15, 2018 not sure about flashing, but i think P400 will not support drives larger than 2TB.. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.