thomas.mantot Posted April 12 Share Posted April 12 (edited) Hello, I'm using Immich and PostgreSQL_Immich, but I have this error into the postgresql docker when I open immich apps or website : ERROR: could not resize shared memory segment "/PostgreSQL.4195037598" to 907743232 bytes: No space left on device I don't know why all my disk are not full Edited April 12 by thomas.mantot Quote Link to comment
Aceriz Posted April 13 Share Posted April 13 On 3/9/2024 at 1:37 PM, Mattaton said: Anyone been successful getting Fail2Ban setup with Immich? had you been able to figure this out ? I found a thread that outlines a way to configure fail 2 ban but not sure how to get the logs https://github.com/immich-app/immich/discussions/3243 Quote Link to comment
thomas.mantot Posted April 15 Share Posted April 15 (edited) Does someone successfully configure Crowdsec with SWAG and Immich ? Crowdsec ban me when I access Immich Solved : I have added whitelist : name: crowdsecurity/immich-whitelists description: "Whitelist des faux positifs d'Immich-api" filter: "evt.Meta.service == 'http' && evt.Meta.log_type in ['http_access-log', 'http_error-log']" whitelist: reason: "Faux positifs d'Immich-api" expression: - evt.Meta.http_verb == 'POST' && evt.Meta.http_status == '403' && evt.Parsed.request contains '/asset/upload' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '429' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '200' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '304' && evt.Parsed.request contains '/api/asset/thumbnail/' Edited April 15 by thomas.mantot Quote Link to comment
Mattaton Posted April 15 Share Posted April 15 (edited) On 4/13/2024 at 12:27 AM, Aceriz said: had you been able to figure this out ? I found a thread that outlines a way to configure fail 2 ban but not sure how to get the logs https://github.com/immich-app/immich/discussions/3243 No. I let it go. Probably overkill anyway. But thanks! Edited April 15 by Mattaton Quote Link to comment
Mattaton Posted April 15 Share Posted April 15 3 hours ago, thomas.mantot said: Does someone successfully configure Crowdsec with SWAG and Immich ? Crowdsec ban me when I access Immich Solved : I have added whitelist : name: crowdsecurity/immich-whitelists description: "Whitelist des faux positifs d'Immich-api" filter: "evt.Meta.service == 'http' && evt.Meta.log_type in ['http_access-log', 'http_error-log']" whitelist: reason: "Faux positifs d'Immich-api" expression: - evt.Meta.http_verb == 'POST' && evt.Meta.http_status == '403' && evt.Parsed.request contains '/asset/upload' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '429' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '200' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '304' && evt.Parsed.request contains '/api/asset/thumbnail/' I recently disabled Crowdsec for completely unrelated reasons, but up until then I had SWAG, Crowdsec, and Immich working together just fine. Never got banned. I see you have it solved though. Sweet! 🙂 Quote Link to comment
thomas.mantot Posted April 16 Share Posted April 16 Hi again, I cannot delete picture using immich web page, when I delete I have a message information : Trashed 0 assets. and using android app : impossible to delete, read only file. What I need to do ? Quote Link to comment
martabal Posted April 16 Share Posted April 16 1 hour ago, thomas.mantot said: Hi again, I cannot delete picture using immich web page, when I delete I have a message information : Trashed 0 assets. and using android app : impossible to delete, read only file. What I need to do ? You’re probably using an external library which are only read-only (you can’t trash or delete assets) Quote Link to comment
Rewrap Posted April 16 Share Posted April 16 I'm not sure what's going on. After images/videos uploaded, thumbnails don't work. When i open immich web-ui, its extremely slow. Quote Link to comment
thomas.mantot Posted April 17 Share Posted April 17 23 hours ago, martabal said: You’re probably using an external library which are only read-only (you can’t trash or delete assets) yes right, I only use immish as a "big library browser", all my image are stored on my unraid and uploaded using owncloud. So it is not possible to delete image using external library ? Quote Link to comment
martabal Posted April 18 Share Posted April 18 21 hours ago, thomas.mantot said: yes right, I only use immish as a "big library browser", all my image are stored on my unraid and uploaded using owncloud. So it is not possible to delete image using external library ? Currently, no 1 Quote Link to comment
Lordbye Posted April 22 Share Posted April 22 i have install immich this evening. It starts correctly. I have a photo folder (with a lot of subfolder) in my unraid share. How can i use immich to load (and don't duplicate) my original photoes stored on unraid folder? Quote Link to comment
JaviPas Posted May 7 Share Posted May 7 On 4/16/2024 at 10:40 AM, martabal said: You’re probably using an external library which are only read-only (you can’t trash or delete assets) I have the same problem, but I'd like to do that so if I'm using an external library, how to use an internal one? I've got a pretty big library, over 150K pictures and around 10k videos, 1.5TB in size overall. As you can see on the container configuration, i've got /photos -> /mnt/cache/immich-previews (internal library, I guess, but this is 195GB in size and is full of thumbnails) /import -> /mnt/user/fotos (external library with my folder organization untouched, I do create forlders as albums there from my own sanity as I sync/uploads pictures and videos to manage them). Is this somekind of permissions problem? A 'ls -la' shows as follows on these directories: drwxr-xr-x 7206 javipas users 7208 May 2 08:30 fotos/ drwxrwxrwx 6 nobody users 6 Feb 10 09:08 immich-previews/ Thanks! Quote Link to comment
Mattti1912 Posted May 9 Share Posted May 9 Hello People I have a problem with immich.. My docker container called PostgreSQL_Immich, will not start, i think it could be because of an update. But im not sure:( Anyone with an idea for what it could be??,, Is it possible to downgrade both containers?? This is my error: find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning find: ‘/var/lib/postgresql/data/global’: Structure needs cleaning Thank you very much.. regards.. Quote Link to comment
Mattti1912 Posted May 10 Share Posted May 10 Hello again:) I fixed the issue, used this video : Thank you, regards Quote Link to comment
srepper Posted May 12 Share Posted May 12 does someone has the same error? ( Immich logs ) ( immich console ) Quote Link to comment
rutherford Posted May 13 Author Share Posted May 13 @srepper looks like permissions problems. Have you googled around for Immich permission problems? Have you restarted the docker? Quote Link to comment
srepper Posted May 13 Share Posted May 13 (edited) 13 hours ago, rutherford said: @srepper looks like permissions problems. Have you googled around for Immich permission problems? Have you restarted the docker? Edit: Found the issue: I used my USB drive. I can create and do stuff with it but not my docker. Thanks ! Thanks for response. I google arround immich permission problems, but didn't find any solutions. I restart it oftern, but same issue.. maybe because my usb drive is my storage? Edited May 13 by srepper Quote Link to comment
rutherford Posted May 14 Author Share Posted May 14 (edited) Here's a thread about docker permission issues: Under your Immich Settings, hit Advanced, make sure those permissions down there are correct, like these in mine below. I also saw a crossed out thing about your storage being somewhere else instead of a normal data disk in unRaid? Also check Common Settings under Settings for Unassigned Devices I seem to remember changing something in here a while back... Maybe that Destructive Mode thing? I don't exactly recall. Also the Main > unassigned devices > Settings gear on the drive you're mounting Hopefully this will get you somewhere! Looking over some other messages you have: looks like you probably linked the USB (?) folder via the Docker Settings for Immich. Make sure you got that right too. Let see if I have that somewhere... I also have a Syncthing going, and it IS writing to an external USB drive. Here are the settings for adding that drive into the docker settings for Syncthing, your addition to Immich, to ahve access to that USB drive would be the same: Another thing you can try out: Dashboard > Immich (icon) > "Console >_". That will drop you into the environment the Immich docker lives. You can CLI (command line interface) your way around in there. Try heading over to: /photos, and creating a file there: root@0a4265eaedab:/# cd photos/ root@0a4265eaedab:/photos# ls encoded-video library profile thumbs upload root@0a4265eaedab:/photos# touch test.txt root@0a4265eaedab:/photos# ls -la total 0 drwxrwxrwx 1 abc users 110 May 13 18:21 . drwxr-xr-x 1 root root 322 Apr 30 21:20 .. drwxr-xr-x 1 abc users 58 Oct 23 2023 encoded-video drwxr-xr-x 1 abc users 58 Oct 23 2023 library drwxr-xr-x 1 abc users 58 Oct 7 2023 profile -rw-r--r-- 1 root root 0 May 13 18:21 test.txt drwxr-xr-x 1 abc users 58 Oct 23 2023 thumbs drwxr-xr-x 1 abc users 58 Oct 25 2023 upload root@0a4265eaedab:/photos# That should work, and if it doesn't, then you're getting closer to the problem. Edited May 14 by rutherford Quote Link to comment
rexkwondo Posted May 17 Share Posted May 17 I suffered a disk error on an Unraid install which had Immich on it and now that container won't run. Fortunately I was able to copy all of the files off though, so now I'm trying to import them elsewhere. It looked like it was working until it got to the "uploading assets" step and failed - any idea what I'm missing? Here's a screenshot of the error: Quote Link to comment
mbc0 Posted May 18 Share Posted May 18 Hi, I see that my storage is always full? Is there a way to correct this information on the dashboard? As you can see here, I have 720GB available Quote Link to comment
rutherford Posted May 18 Author Share Posted May 18 @mbc0 so 2.7TB, does that seem right to you? Do you have anything that’s 2.7TB? I suspect your file paths are incorrect in the docker, then the Immich settings. revisit the setup instructions, pay close attending to Docker Settings > paths then also, once you get that Immich docker going, where those paths are pointing. Quote Link to comment
mbc0 Posted May 18 Share Posted May 18 Thank you, I will recheck again, I was sure all was ok but will have another look! Quote Link to comment
mbc0 Posted May 18 Share Posted May 18 Hi, I have just walked through the installation video made by spaceinvader one and the only thing different I did was use a sub-folder instead of a dedicated share which has done the trick, thank you 🙂 1 Quote Link to comment
tictoc Posted May 26 Share Posted May 26 I'm trying to connect Immich to Crowdsec however I'm missing the immich_server.log from /mnt/user/appdata/immich/. It does appear to be in /mnt/user/system/docker/docker/containers/containerid/ though with the name containerid-json.log. I assume something is not right there? Any ideas how can I get it show in appdata/immich? Quote Link to comment
tictoc Posted June 1 Share Posted June 1 (edited) Okay, so I've re-read the Crowdsec docs a bit more carefully and Crowdsec can actually parse the logs directly from docker so a log file isn't necessary. I haven't actually go this to work yet but it seems it should. I will raise it as a question to the Crowdsec folks. Edit: In case anyone else needs this for Immich or any other docker logs a quick write up follows. Pr-requisites: - the dockersocket app from CA to proxy the docker socket - a custom docker network that dockersocket and Crowdsec are on. Possibly Immich too as that is where I have it. - Immich collection installed on Crowdsec To enable Crowdsec to read from dockersocket you need to add the variable `INFO: 1` to the dockersocket container. Source. In your Crowdsec aquis.yaml add: source: docker container_name: - immich labels: type: immich docker_host: tcp://dockersocket:2375 Source. You will also need to whitelist some of the api calls. Create a new yaml file in /crowdsec/parsers/s02-enrich/ name: crowdsecurity/immich-whitelists description: "Whitelist false positive from Immich-api" filter: "evt.Meta.service == 'http' && evt.Meta.log_type in ['http_access-log', 'http_error-log']" whitelist: reason: "Whitelist false positive from Immich-api" expression: - evt.Parsed.traefik_router_name == 'immich@docker' && evt.Meta.http_verb == 'POST' && evt.Meta.http_status == '403' && evt.Parsed.request contains '/asset/upload' - evt.Parsed.traefik_router_name == 'immich@docker' && evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '429' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Parsed.traefik_router_name == 'immich@docker' && evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '200' && evt.Parsed.request contains '/api/asset/thumbnail/' - evt.Parsed.traefik_router_name == 'immich@docker' && evt.Meta.http_verb == 'GET' && evt.Meta.http_status == '304' && evt.Parsed.request contains '/api/asset/thumbnail/' Source. Restart Crowdsec and Immich logs should be being parsed with no bans from using the mobile app. Edited June 1 by tictoc Updated information. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.