trurl Posted November 16, 2016 Share Posted November 16, 2016 Anyone else's Plex reset their server settings and default name to TOWER after a restart of the docker app? I was trying to install some channels and just did a simple start/stop of the plex docker and now when I start plex it says i need to "reclaim" my server as it's been renamed to TOWER. My library exists as such untouched except my server settings have all been reverted to default and my friends access settings revoked as well. Any reboot results in a broken setup until I reopen outside network and assign shared libraries Suggest you put your flash in your PC and let it checkdisk. Your server name has nothing to do with plex, but it is stored on your flash drive in config/ident.cfg Quote Link to comment
Riot Posted November 16, 2016 Share Posted November 16, 2016 Sabnzbd plugin is not showing upgrade button for newest version sabnzbd 1.1.1 Stopped and started sabznbd via plugin. No other trouble shooting done. Quote Link to comment
AnyColourYouLike Posted November 16, 2016 Share Posted November 16, 2016 This thread isn't for the docker app. It's for the plugin version (which is not resetting the name) DoH! Not sure how I landed here. I thought I clicked a support link in the docker page. Suggest you put your flash in your PC and let it checkdisk. Your server name has nothing to do with plex, but it is stored on your flash drive in config/ident.cfg Yeah I hope that's not the issue.. It is in fact a new USB I may have never rebooted while using yet. Anywhooo I'll probably just pursue docker advice (it was a recent update I think) and in the meantime I'll just refrain from reboots. Quote Link to comment
JohnnyT Posted November 17, 2016 Share Posted November 17, 2016 Filebot Plugin? Am I missing something with saving the config? I get this message "Config directory located on RAM drive" which I believe is causing my subtitles login to del every time I reboot. I checked the box for config directory and clicked apply but it never saves. Is there a step I am missing? I tried with filebot off and on neither time would it apply and show a config directory. Quote Link to comment
Riot Posted November 18, 2016 Share Posted November 18, 2016 Sabnzbd plugin is not showing upgrade button for newest version sabnzbd 1.1.1 Stopped and started sabznbd via plugin. No other trouble shooting done. Rebooted server earlier. Sabnzbd failed to install on start with following message; Nov 18 08:48:15 Leviathan emhttp: Installing SABnzbd... Nov 18 08:48:30 Leviathan emhttp: Install failed: Failed integrity test Was able to install Sabnzbd from plugin page and it installed version 1.1.0 Quote Link to comment
johnlo Posted November 18, 2016 Share Posted November 18, 2016 help needed PhAzE, I am having a problem with the Emby Plugin. I am unable to play any video via Firefox, from Roku, and from tablets Apps as well. But it appears I can playing when using the Emby Theater app from PC (computer)... or at least a few movies I have tired. I posted this question in Emby forum.. the admin there said the following: "It looks like ffmpeg is just getting stuck for whatever reason. I notice you're running version 4.2.3 of the mono runtime, which is a little behind now. I would suggest updating that to either 4.4.2 or 4.6.1.5. " How do I go about updating the Mono version? I am running unraid 6.2.4 Emby - Installed Version:3.0.8500 Mono Version:4.2.3 SQLite3 Version:2016 2013 FFmpeg Version:2.7.1 MediaInfo Version:0.7.63 InfoZip Version:6.00 Plugin Version: 2016.09.17.1 or do you think it would be a better idea to reinstall everything??? and if so how do I go about doing it? Thank you!!! server-63615023999.txt ffmpeg-remux-480d035c-0f87-486e-9f45-0a21ad94218f.txt ffmpeg-remux-b10a7213-2dbe-4ea8-b71f-7c69e5bac7bd.txt Quote Link to comment
tyrindor Posted November 19, 2016 Share Posted November 19, 2016 My NZBGet is randomly crashing while downloading. I have gigabit internet and I just wonder if it's going too fast. Sometime I can download for hours no problem, other times it will crash left and right. I get no error, and just start it again normally. No idea how to see whats going on, any ideas? Quote Link to comment
RobJ Posted November 19, 2016 Share Posted November 19, 2016 My NZBGet is randomly crashing while downloading. I have gigabit internet and I just wonder if it's going too fast. Sometime I can download for hours no problem, other times it will crash left and right. I get no error, and just start it again normally. No idea how to see whats going on, any ideas? Make sure you do a long Memtest. May not be a RAM issue, but that's the first thing you should eliminate. If you have more recent RAM (DDR4 and up), you may want to try the PassMark Memtest instead. Quote Link to comment
glave Posted November 19, 2016 Share Posted November 19, 2016 Could someone offer a little starter help with Filebot? I've installed the plugin and started it, but honestly, the next step isn't that obvious to me. I've used filebot before, but I'm not really seeing the steps I need to take to change configs or even kick it off. Quote Link to comment
xbmcjb Posted November 21, 2016 Share Posted November 21, 2016 Hi, I'm trying to install sabnzbd (Plugin Version: 2016.09.17.1) on unraid 6.2.4 and I get this error message. 2016-11-20 20:30:34 [WARNING] Unable to get latest version from online - Checking USB for any install file 2016-11-20 20:30:34 [ERROR] Install failed: Install file missing Any idea what's happening ? Thanks Quote Link to comment
Riot Posted November 21, 2016 Share Posted November 21, 2016 Hi, I'm trying to install sabnzbd (Plugin Version: 2016.09.17.1) on unraid 6.2.4 and I get this error message. 2016-11-20 20:30:34 [WARNING] Unable to get latest version from online - Checking USB for any install file 2016-11-20 20:30:34 [ERROR] Install failed: Install file missing Any idea what's happening ? Thanks The github repo dir structure appears to have changed Grab the sabnzbd file manually from here https://github.com/sabnzbd/sabnzbd/releases/download/1.1.0/SABnzbd-1.1.0-src.tar.gz put it in your config/plugins/Sabnzbd folder on your flash then try installing from the plugin page. Temporary fix for now Quote Link to comment
xbmcjb Posted November 21, 2016 Share Posted November 21, 2016 Thanks ! I also had to rename the file to Sabnzbd-PhAzE-1.1.0-src.tar.gz Everything is all right now Quote Link to comment
skunkworx Posted November 23, 2016 Share Posted November 23, 2016 Any chance of an updated sabnzbd plugin that references the new repo structure Quote Link to comment
Riot Posted November 23, 2016 Share Posted November 23, 2016 Any chance of an updated sabnzbd plugin that references the new repo structure I'm sure he'll update it after the holidays. Since the releases appear to now be placed into version number sub folders rather than just lumped into "download" like before it's probably going to take more than just changing the repo url else it will just break again next version. Just give him a bit of time. Quote Link to comment
skunkworx Posted November 23, 2016 Share Posted November 23, 2016 Any chance of an updated sabnzbd plugin that references the new repo structure I'm sure he'll update it after the holidays. Since the releases appear to now be placed into version number sub folders rather than just lumped into "download" like before it's probably going to take more than just changing the repo url else it will just break again next version. Just give him a bit of time. Thanks For the reply. I'm fine with waiting as I know people do this for free and also have real life things to do also. I was just wanted to prompt a response to find out if it was going to be updated or if I should be looking for an alternative. Quote Link to comment
johnlo Posted November 27, 2016 Share Posted November 27, 2016 help needed PhAzE, I am having a problem with the Emby Plugin. I am unable to play any video via Firefox, from Roku, and from tablets Apps as well. But it appears I can playing when using the Emby Theater app from PC (computer)... or at least a few movies I have tired. I posted this question in Emby forum.. the admin there said the following: "It looks like ffmpeg is just getting stuck for whatever reason. I notice you're running version 4.2.3 of the mono runtime, which is a little behind now. I would suggest updating that to either 4.4.2 or 4.6.1.5. " How do I go about updating the Mono version? I am running unraid 6.2.4 Emby - Installed Version:3.0.8500 Mono Version:4.2.3 SQLite3 Version:2016 2013 FFmpeg Version:2.7.1 MediaInfo Version:0.7.63 InfoZip Version:6.00 Plugin Version: 2016.09.17.1 or do you think it would be a better idea to reinstall everything??? and if so how do I go about doing it? Thank you!!! Help is still needed??!!!?? Quote Link to comment
PhAzE Posted November 27, 2016 Author Share Posted November 27, 2016 Sorry guys, I've been out with a spinal injury the last few months. I'll have a look at these soon. Quote Link to comment
johnlo Posted November 28, 2016 Share Posted November 28, 2016 Sorry guys, I've been out with a spinal injury the last few months. I'll have a look at these soon. ok. Get well soon PhAzE Quote Link to comment
PhAzE Posted November 29, 2016 Author Share Posted November 29, 2016 Sabnzbd has been updated and should now correctly find the latest version. The install script was ok, only it couldn't parse the latest.txt file properly. Quote Link to comment
PhAzE Posted November 29, 2016 Author Share Posted November 29, 2016 Filebot Plugin? Am I missing something with saving the config? I get this message "Config directory located on RAM drive" which I believe is causing my subtitles login to del every time I reboot. I checked the box for config directory and clicked apply but it never saves. Is there a step I am missing? I tried with filebot off and on neither time would it apply and show a config directory. It should be saving. Sounds like the config file is locked. You can do one of two things, either uninstall / reinstall the plugin or go to /boot/config/plugins/Filebot/Filebot.cfg and edit the file manually, update the CONFIG variable to your location. Quote Link to comment
PhAzE Posted November 29, 2016 Author Share Posted November 29, 2016 Emby updated so it can install latest version again. I still have 'use beta' disabled for now, since it is unreliable in grabbing a beta compatible with Unraid on each beta release. -=PhAzE=- Quote Link to comment
PhAzE Posted November 29, 2016 Author Share Posted November 29, 2016 help needed PhAzE, I am having a problem with the Emby Plugin. I am unable to play any video via Firefox, from Roku, and from tablets Apps as well. But it appears I can playing when using the Emby Theater app from PC (computer)... or at least a few movies I have tired. I posted this question in Emby forum.. the admin there said the following: "It looks like ffmpeg is just getting stuck for whatever reason. I notice you're running version 4.2.3 of the mono runtime, which is a little behind now. I would suggest updating that to either 4.4.2 or 4.6.1.5. " How do I go about updating the Mono version? I am running unraid 6.2.4 Emby - Installed Version:3.0.8500 Mono Version:4.2.3 SQLite3 Version:2016 2013 FFmpeg Version:2.7.1 MediaInfo Version:0.7.63 InfoZip Version:6.00 Plugin Version: 2016.09.17.1 or do you think it would be a better idea to reinstall everything??? and if so how do I go about doing it? Thank you!!! Help is still needed??!!!?? The mono version we use is ok, it doesn't affect FFMPEG. I know the Emby devs like having the lastest, but some other plugins share this mono install, and I have to recompile it from scratch for UnRaid each time which is a pain since there are no updated slackware txz mono install files anywhere that i'm away of. With that said, you can try the following: - Stop all PhAzE plugins - Remove the PhAzE-Common folder: - if you have a cache drive run -> rm -rf /mnt/cache/.PhAzE-Common/ - if you don't have a cache drive run -> rm -rf /usr/local/PhAzE-Common/ - Start Emby plugin (and the rest of the PhAzE plugins you may use) and it will reinstall everything from that folder There is likely a problem with the ffmpeg installed on your system, since i was able to do a fresh install and it works from the browser. Removing this directory will not affect your settings or application configs for Emby. See if that helps. Quote Link to comment
Riot Posted November 30, 2016 Share Posted November 30, 2016 Sabnzbd has been updated and should now correctly find the latest version. The install script was ok, only it couldn't parse the latest.txt file properly. Updated with no issues. Thanks. Hope you get well soon. Quote Link to comment
PhAzE Posted December 1, 2016 Author Share Posted December 1, 2016 Emby and Sonarr updated: - Mono compiled and updated to 4.6.2.7 You should be able to update normally, but I recommend restarting both of these apps after the update so the new mono version kick in, or better yet a system reboot to make sure the Mono update is not mucked by the older version in any way. -=PhAzE=- Quote Link to comment
zepheris Posted December 1, 2016 Share Posted December 1, 2016 I ran into a problem trying to get FileBot to install. I discovered that the latest version on Source Forge doesn't include a portable.zip download. You can fix it by editing the /usr/local/emhttp/plugins/scripts/rc.Filebot file Find the function app_install() { inside the function you'll see a local LATESTVERSION=`app_newer` variable replace `app_newer` with '4.7.2' Save and then try to install. This should get you up and running. I only did this as a temporary measure. Disclaimer: I make no claims that this will work for you. Worst case, it'll screw up your Unraid server and cause sparks to fly from your power supply. Modify files at your own risk. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.