On 10/14/2025 at 7:49 AM, Skylinar said:

Does someone know how to get attention of the maintainer of the bergware/dynamix github repo? -> https://github.com/bergware/dynamix
AravindGopala from GitHub took the time to fix the bug in the S3SleepPlugin and we are trying to get this in via a Pull Request:
https://github.com/bergware/dynamix/pull/102

This fix makes the S3SleepPlugin usable again, should be interesting for anyone who was using it in the past.

Any help would be appreciated. Thanks!

+1 here...

On 10/14/2025 at 2:49 AM, Skylinar said:

Does someone know how to get attention of the maintainer of the bergware/dynamix github repo? -> https://github.com/bergware/dynamix
AravindGopala from GitHub took the time to fix the bug in the S3SleepPlugin and we are trying to get this in via a Pull Request:
https://github.com/bergware/dynamix/pull/102

This fix makes the S3SleepPlugin usable again, should be interesting for anyone who was using it in the past.

Any help would be appreciated. Thanks!

Can you DM me on Discord username unraid_squid to talk about this. I'll be able to handle this, but not until the weekend at the earliest

I am using the dynamix sleep plugin and tried to set Set WOL options before sleep to ug

but it is not saving the option if i select ug together. it saves u ... it saves g standalone - but if i select both it is not stored.

if u use this command it stores the setting .. to the NIC can do it but not via plugin GUI Config.

ethtool -s eth0 wol ug

Hello guys , im using dynamix s3 sleep plugin and it does put the server to sleep but the problem is when the server wakes up my docker container such as jellyfin… and others who use gpu cannot see / use the gpu , even if i start the vm which has gpu passthrough the vm gets stuck on startup and it never starts.

To make everything work again i have to reboot the server , has anyone experienced this and what could be the solution to this problem? I have seen few users reported same problem since many months on unraid discord but there was response to this problem.

Would it be possible to add real time/historic graph for RAM similar to CPU on the dashboard? Is there a graph view elsewhere that I might not be aware of? I've only really used the one on the dashboard.

3 minutes ago, max32268 said:

Would it be possible to add real time/historic graph for RAM similar to CPU on the dashboard? Is there a graph view elsewhere that I might not be aware of? I've only really used the one on the dashboard.

oh duh, "Stats" page 🤦‍♂️. But still would be great to see the addition to the dashboard page panel for RAM

Just a note that there is an update available for all the dynamix plugins. This is to migrate the repository over to be served from Unraid's official github.

Side effect of this is that FCP will tell you that there's an update available and that it's also unknown to CA. Just install the updates and all will be good.

Fix Common Problems is reporting an issue with the Dynamix plugins I have installed. So I checked for updates and they were installed.

Ran Fix Common Problems again and still reporting issues.

Screen capture is after updating the Dynamix plugins...

Screen shot of plugins after updating.

This is happening on my two Unraid servers. Both are 6.12.15.

Cheers

Ken in Nova Scotia

We need a reinstalled the Plugins?

I can see multiple Plugins in CA for example the Cache Directory Plugin. From limetech and from bergware.

Other Plugins like SSD trim I can see too, but was this not included in Unraid itself?

21 hours ago, Vetteman said:

Fix Common Problems is reporting an issue with the Dynamix plugins I have installed. So I checked for updates and they were installed.

Ran Fix Common Problems again and still reporting issues.

Screen capture is after updating the Dynamix plugins...

It's not reporting an issue. It's reporting a comment to let you know what happened. Run fix common problems scan one more time and those comments will disappear and it should report no issues found.

1 hour ago, wirenut said:

It's not reporting an issue. It's reporting a comment to let you know what happened. Run fix common problems scan one more time and those comments will disappear and it should report no issues found.

Yes, 1st time "rescan" did not work, press the "rescan" button, and it will scan again for the 2nd time.
Now the error message will be gone.
Note: You must update all the plugina first, before proceeding to rescan.

Dynamix Day Night appears to be broken on Unraid 7.2. No themes are selectable in the settings.

Anyone else have the same issue or a workaround?

Hi, first-time poster here. I noticed a really minor broken link in Dynamix S3 Sleep. Not sure where is the best place to post things like this.

On the Main page in the Array Operations section, S3 Sleep adds a new Sleep button below Reboot and Shutdown.

The description next to it says:

Make sure your server supports S3 sleep. Check this wiki entry for more information. 

The link goes to an old broken Lime Techology page. I suspect it should be: Wake-on-LAN (WoL).

Need a bit help with this.

I'm using autofan control (and some other dynamix plugins), it work very well.

But I find it a bit annoying how it spams the syslog with really not important messages like:

Dec 9 11:04:02 f autofan: Highest disk temp is 40C, adjusting fan speed from: 129 (50% @ 703rpm) to: 150 (58% @ 817rpm)

Dec 9 11:19:08 f autofan: Highest disk temp is 39C, adjusting fan speed from: 150 (58% @ 818rpm) to: 129 (50% @ 705rpm)

Dec 9 11:23:14 f autofan: Highest disk temp is 39C, adjusting fan speed from: FULL (100% @ 1398rpm) to: 211 (82% @ 1175rpm)

Dec 9 11:23:14 l3router syslogd: last message repeated 1 times

Dec 9 11:28:19 f autofan: Highest disk temp is 30C, adjusting fan speed from: 211 (82% @ 1179rpm) to: OFF (0% @ 0rpm)

Dec 9 11:28:19 l3router syslogd: last message repeated 1 times

Dec 9 11:29:14 f autofan: Highest disk temp is 30C, adjusting fan speed from: 129 (50% @ 696rpm) to: OFF (0% @ 0rpm)

Nice to know that it works, and, yeah, it might be reasonable if it has to go up to 100% with a fan (and maybe lower again later on), but I am not interested to see changes from 50 to 58% and back.

Is there a way to silence it a bit so that other messages are more visible in the syslog???

Just noticed the changelog for Dynamix System Stats and System information both say:

• Migrate repository to Unraid

Does this mean these plugins are part of stock unraid now and I should remove/uninstall them? If so what unraid version does that come into effect?

No, that just means that the plugins are now managed by the Unraid org instead of the 3rd party they were under before.

No change for users.

Edited December 13, 2025Dec 13 by Kilrah

Ok thanks

On 10/13/2022 at 9:40 PM, Ecsport108 said:

Hello all,

 

I am having similar issues to Hasown above with a Gigabyte W480 Vision W motherboard with three system fans installed (not including CPU cooler). When the IT87 plugin is not installed, I get three fans listed in both the System Temp and Fan Auto Control plugins appearing as it8792. If I install the IT87 plugin multiple new it8688 entries, including those for fan headers not currently populated, appear just as in the screenshot above. Even with the IT87 plugin installed, System Temp seems to only list speeds next to the it8792 entries anyways so I have uninstalled the IT87 plugin for now. My CPU fan only appears with the IT87 plugin installed, but I don't want to control it with the Fan Auto Control plugin regardless. I have enabled fan control on all three it8792 PWM controllers and the Fan Auto Control plugin is able to detect a fan on each controller, albeit intermittently. However, when I go to detect the minimum PWM value, I hear the fans physically changing speeds but a value never populates the box and the speed control doesn't appear to be working correctly. I have tried putting multiple random numbers in the "Minimum PWM Value" box but it does not seem to affect anything. Here are some lines from my log that show the plugin appearing to adjust the PWM value but the RPMs stay constant. Does anyone have any ideas on how to fix this, I am going deaf from these 80mm server fans and the motherboard's BIOS fan controls only allow me to bring them down to 70% speed.

 

Oct 13 16:25:53 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3110rpm) to: 88 (34% @ 3110rpm)
Oct 13 16:25:53 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3229rpm) to: 88 (34% @ 3229rpm)
Oct 13 16:26:09 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3040rpm) to: 88 (34% @ 3040rpm)
Oct 13 16:26:59 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3110rpm) to: 88 (34% @ 3110rpm)
Oct 13 16:26:59 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3245rpm) to: 88 (34% @ 3229rpm)
Oct 13 16:28:05 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3110rpm) to: 88 (34% @ 3110rpm)
Oct 13 16:28:05 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3245rpm) to: 88 (34% @ 3229rpm)
Oct 13 16:29:11 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3110rpm) to: 88 (34% @ 3125rpm)
Oct 13 16:29:11 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3245rpm) to: 88 (34% @ 3229rpm)
Oct 13 16:30:17 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3110rpm) to: 88 (34% @ 3110rpm)
Oct 13 16:30:17 NASNAME autofan: Highest disk temp is 36C, adjusting fan speed from: 112 (43% @ 3214rpm) to: 88 (34% @ 3229rpm)

 

Did you ever solve this? I just got the same board - 3 of the fans are on it8688 and I can control their speed via PWM. The other 3 appear to be on it8792 while I manage to identify them (barely visible RPM change) I can't really control them. This is with it87 driver by ich777 installed. Without that driver, I got zero controllers recognized.

Hi,

The Active Streams plugin GUI is not working really good with Unraid 7.2.3 version.

The columns are too big, and the path string is bleeding through to different columns as well.

Any plan to fix this? I love this plugin to see if anyone using the server. But hard to read the values like this.

Thanks,

Mark

On 11/24/2025 at 7:41 AM, Mann said:

Dynamix Day Night appears to be broken on Unraid 7.2. No themes are selectable in the settings.

Anyone else have the same issue or a workaround?

same here

Hi, My active streams plugin page looks messed up, any fix available?

My Active Streams plugin is not showing any streams. I'm on Unraid v7.2.3 and plugin v2025.11.14

I have uninstalled and reinstalled the plugin. No errors showing anywhere.

Dashboard Shares widget shows related Stream count, but the Active Streams page reports "No active streams"

Update: Seems to work for everything except Plex initiated streams. Those I can check through Plex tools, but it would be nice to be able to see it from Unraid too.

Any suggestions on how to fix?

Edited January 22Jan 22 by mrhanderson

Do we still need `Dynamix Local Master` plugin ?

Found the icon is broken and plugin not used when Enable WSD = yes in 7.2.4 ?

Edited April 13Apr 13 by Masterwishx

Hi!

I replaced my CPU this weekend, and now, although finding drivers, the temp plugin does not work anymore, and the drop-downs are all "not used" no matter how much I troubleshoot.

similar to this issue, except I am running 7.2.4