bonienl Posted June 17, 2015 Share Posted June 17, 2015 I wouldn't find that in a million years. Don't know how to fix it yet and keep tabbed/non-tabbed compliance. Any advice bonienl? I need to look into your plugin when time permits. I'll keep you posted. Link to comment
trurl Posted June 17, 2015 Share Posted June 17, 2015 ... 3) When I use Sparkly's Krusader docker, it isn't able to see any content in the /mnt/disks/[xxx] folders. Is there any way to give that docker access to these mount points? Interesting. I have /mnt in my Volume mappings for Krusader, so I thought it would be there. The mount in question I have named offsite. and I can see its contents fine from the network. In Krusader under disks I see offsite but there is nothing in it. Also under disks I can see the SMB mount to my Windows machine that I created with this plugin, and I can browse its contents. Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 Hi gfjardim, This Unassigned Devices plugin is amazing! I do have a couple of questions / requests: 1) Would it be possible to add spin up/spin down icons next to the hard drives in the list of unassigned devices? 2) Have you considered merging your preclear plugin into this plugin? It would be more natural to kick off a preclear from the Unassigned Devices tab than from Settings -> Preclear. 3) When I use Sparkly's Krusader docker, it isn't able to see any content in the /mnt/disks/[xxx] folders. Is there any way to give that docker access to these mount points? 4) I noticed the /var/log/unassigned.devices.log file includes smb passwords. Can that be sanitized? 5) My /flash/config/plugins/unassigned.devices directory includes both of these: * ntfs-3g-2014.2.15-x86_64-1.txz - dated 4/28/15 * ntfs-3g-2015.3.14-x86_64-1.txz - dated 4/18/15 Is that going to cause a conflict? Should I delete one? Thanks! 1) The spin down feature is incomplete right now, and all drives will spin down after 15 minutes of inactivity. When complete, it will use the system's default spin down interval. 2) No. Preclear requires a separate feature set, and join them will result in a massive increase of complexity. I can add a link in front of the disk serial, if this make things easier... 3) I too saw some weirdness using some Desktop-like containers; I'll take a look soon. 4) I'll do that, thanks for pointing out. 5) Only one get installed - the most recent one. Link to comment
uldise Posted June 17, 2015 Share Posted June 17, 2015 Hi, just upgraded plugin to latest version, smb mounts look promising but how about NFS? for me NFS between unRAID and Ubuntu workstation works approx twice as fast as SMB mounts.. if we use this to share files between two unRAID servers, then NFS works much faster i think.. Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 3) When I use Sparkly's Krusader docker, it isn't able to see any content in the /mnt/disks/[xxx] folders. Is there any way to give that docker access to these mount points? Apparently, this is a known Docker issue: https://github.com/docker/libcontainer/pull/632 For now, if you need to access /mnt/disks/[xxx] folders, you need to restart docker service first. Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 Hi, just upgraded plugin to latest version, smb mounts look promising but how about NFS? for me NFS between unRAID and Ubuntu workstation works approx twice as fast as SMB mounts.. if we use this to share files between two unRAID servers, then NFS works much faster i think.. Not in my todo list, I'm afraid... Link to comment
ljm42 Posted June 17, 2015 Share Posted June 17, 2015 Hi gfjardim, This Unassigned Devices plugin is amazing! I do have a couple of questions / requests: 1) Would it be possible to add spin up/spin down icons next to the hard drives in the list of unassigned devices? 2) Have you considered merging your preclear plugin into this plugin? It would be more natural to kick off a preclear from the Unassigned Devices tab than from Settings -> Preclear. 3) When I use Sparkly's Krusader docker, it isn't able to see any content in the /mnt/disks/[xxx] folders. Is there any way to give that docker access to these mount points? 4) I noticed the /var/log/unassigned.devices.log file includes smb passwords. Can that be sanitized? 5) My /flash/config/plugins/unassigned.devices directory includes both of these: * ntfs-3g-2014.2.15-x86_64-1.txz - dated 4/28/15 * ntfs-3g-2015.3.14-x86_64-1.txz - dated 4/18/15 Is that going to cause a conflict? Should I delete one? Thanks! 1) The spin down feature is incomplete right now, and all drives will spin down after 15 minutes of inactivity. When complete, it will use the system's default spin down interval. 2) No. Preclear requires a separate feature set, and join them will result in a massive increase of complexity. I can add a link in front of the disk serial, if this make things easier... 4) I'll do that, thanks for pointing out. 5) Only one get installed - the most recent one. 3) Apparently, this is a known Docker issue: https://github.com/docker/libcontainer/pull/632 For now, if you need to access /mnt/disks/[xxx] folders, you need to restart docker service first. 1) That sounds great, thanks! 2) Ah, didn't realize that. You did a great job hiding the complexity I think a link to the preclear plugin would be helpful if you can find room for it. 3) Cool to see that the pull request has been accepted, so perhaps an upcoming version of Docker will be able to handle this. Until then mc should work 4) thanks! 5) ok, I'll delete the one from 2014. Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 2) Ah, didn't realize that. You did a great job hiding the complexity I think a link to the preclear plugin would be helpful if you can find room for it. Look at this: Would this work for you? Link to comment
ljm42 Posted June 17, 2015 Share Posted June 17, 2015 2) Ah, didn't realize that. You did a great job hiding the complexity I think a link to the preclear plugin would be helpful if you can find room for it. Look at this: Would this work for you? Looks great! Especially if it only displays for hard drives (non-mounted) and not for USB card readers and such. Thanks! Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 Looks great! Especially if it only displays for hard drives (non-mounted) and not for USB card readers and such. Thanks! This could be challenging, since someone may wish to preclear a drive using an USB external enclosure. Link to comment
trurl Posted June 17, 2015 Share Posted June 17, 2015 Just happened to check for updates and saw one for this even though you hadn't announced it yet. I can confirm that the 2.2TB issue is resolved. I do have another issue that I have been trying to work through and it is still happening on this latest version. The script I have assigned to one of my disks executes when I mount the drive as it should, but it also executes when I tell it to unmount the drive, and then the drive doesn't unmount until the script finishes. Link to comment
gfjardim Posted June 17, 2015 Author Share Posted June 17, 2015 Just happened to check for updates and saw one for this even though you hadn't announced it yet. I can confirm that the 2.2TB issue is resolved. I do have another issue that I have been trying to work through and it is still happening on this latest version. The script I have assigned to one of my disks executes when I mount the drive as it should, but it also executes when I tell it to unmount the drive, and then the drive doesn't unmount until the script finishes. When unmounting, the script run in the foreground even if the "background option" is checked. Doesn't make sense trying to unmount a drive while a script is running, does it? Link to comment
ljm42 Posted June 17, 2015 Share Posted June 17, 2015 Looks great! Especially if it only displays for hard drives (non-mounted) and not for USB card readers and such. Thanks! This could be challenging, since someone may wish to preclear a drive using an USB external enclosure. Good point! That use case should trump mine Link to comment
trurl Posted June 18, 2015 Share Posted June 18, 2015 Just happened to check for updates and saw one for this even though you hadn't announced it yet. I can confirm that the 2.2TB issue is resolved. I do have another issue that I have been trying to work through and it is still happening on this latest version. The script I have assigned to one of my disks executes when I mount the drive as it should, but it also executes when I tell it to unmount the drive, and then the drive doesn't unmount until the script finishes. When unmounting, the script run in the foreground even if the "background option" is checked. Doesn't make sense trying to unmount a drive while a script is running, does it? Maybe I left out enough details that I didn't make sense. I mount the drive, and the script executes in the background just as I intend. Upon completion, the script sends me a notification. At this point the script is done and isn't running anymore. Then, I push the unmount button. The script executes again, which is not what I want it to do. I don't want it to execute when I push the unmount button. When it has finished again, I get the notification and the button changes to mount. Is this what it is supposed to do? Is it supposed to execute the script when you tell it to mount and when you tell it to unmount? Link to comment
gfjardim Posted June 18, 2015 Author Share Posted June 18, 2015 Is this what it is supposed to do? Is it supposed to execute the script when you tell it to mount and when you tell it to unmount? Yes, that's why the default script uses the variable ACTION to know witch action it's performing: case $ACTION in 'ADD' ) // do your stuff here echo "Added" ;; 'REMOVE' ) // do your stuff here echo "Removed" ;; esac Link to comment
trurl Posted June 18, 2015 Share Posted June 18, 2015 Is this what it is supposed to do? Is it supposed to execute the script when you tell it to mount and when you tell it to unmount? Yes, that's why the default script uses the variable ACTION to know witch action it's performing: case $ACTION in 'ADD' ) // do your stuff here echo "Added" ;; 'REMOVE' ) // do your stuff here echo "Removed" ;; esac Sorry I guess I didn't really pay much attention to that "example" in the first post since I already had a script I wanted to use. I guess I will have to call my script from within yours. Link to comment
gfjardim Posted June 18, 2015 Author Share Posted June 18, 2015 Sorry I guess I didn't really pay much attention to that "example" in the first post since I already had a script I wanted to use. I guess I will have to call my script from within yours. Or add a verification on yours: if [ "${ACTION}" != "ADD" ]; then exit 0; fi Link to comment
danioj Posted June 18, 2015 Share Posted June 18, 2015 2) Ah, didn't realize that. You did a great job hiding the complexity I think a link to the preclear plugin would be helpful if you can find room for it. Look at this: Would this work for you? Is this a link to the pre_clear script? This would be AWESOME! Man you are ploughing through features on the Roadmap faster than LT are! They should hire you! OoooOooo ... 2 links, one for Official and one for Brian's "Faster ...." Link to comment
trurl Posted June 18, 2015 Share Posted June 18, 2015 Is this what it is supposed to do? Is it supposed to execute the script when you tell it to mount and when you tell it to unmount? Yes, that's why the default script uses the variable ACTION to know witch action it's performing: case $ACTION in 'ADD' ) // do your stuff here echo "Added" ;; 'REMOVE' ) // do your stuff here echo "Removed" ;; esac Sorry I guess I didn't really pay much attention to that "example" in the first post since I already had a script I wanted to use. I guess I will have to call my script from within yours. All working great now. Thanks! Link to comment
naisspas Posted June 19, 2015 Share Posted June 19, 2015 Nice and awesome plugin for unRAID ! gfjardim : did you think about the possibility to mount/umount disk images ? (like docker.img for example !) In my case I have a plex.img (xfs format) mount in /var/lib/plex, and my docker for plex use it (actually, I need to manually mount my image before starting my plex docker) It will be more awesome to have a third option 'Custom mounts' in your plugin Link to comment
Jencryzthers Posted June 19, 2015 Share Posted June 19, 2015 Nice and awesome plugin for unRAID ! gfjardim : did you think about the possibility to mount/umount disk images ? (like docker.img for example !) In my case I have a plex.img (xfs format) mount in /var/lib/plex, and my docker for plex use it (actually, I need to manually mount my image before starting my plex docker) It will be more awesome to have a third option 'Custom mounts' in your plugin That feature would be so awesome! Link to comment
opentoe Posted June 19, 2015 Share Posted June 19, 2015 What's the SMB mount for? I thought once it is already mounted I can just view the mount by accessing it via my Windows command line? What would be the benefit to have another mount point to it? Link to comment
gfjardim Posted June 19, 2015 Author Share Posted June 19, 2015 What's the SMB mount for? I thought once it is already mounted I can just view the mount by accessing it via my Windows command line? What would be the benefit to have another mount point to it? Accessing files from other computers on the network into your unRAID server. Link to comment
opentoe Posted June 19, 2015 Share Posted June 19, 2015 What's the SMB mount for? I thought once it is already mounted I can just view the mount by accessing it via my Windows command line? What would be the benefit to have another mount point to it? Accessing files from other computers on the network into your unRAID server. I created a mount point, named it "2TB". If I want to access that from other computers I just enter "//sun/2TB". If I created an SMB mount on the same name I would access it the same way, "//sun/2TB"? I know I'm missing a piece in my head. The plugin works fantastic by the way. I do see a screen shot with CUSTOM MOUNTS, is that another plugin? Link to comment
archedraft Posted June 19, 2015 Share Posted June 19, 2015 I think you have mount points confused. It allows your unRAID server to connect to a different computers shared drive. For example let's say you have 2 unRAID servers. You could use mount points to connect your second unRAID's server shares to the first. Link to comment
Recommended Posts