[Support] binhex - DelugeVPN

BillR · February 8, 2023

I only saw the same error in the supervisord.log file without the detail I needed. However, I ended up finding it by a process of elimination, commenting out one line at a time. I use ExpressVPN and for me it was the entry: keysize 256

Commented that out with # and I'm up and running again. Seems like an unlikely culprit, but there you go.

WinHac · February 9, 2023

Deluge wont start log below.

WinHac · February 9, 2023

25 minutes ago, WinHac said:

Deluge wont start log below.

2023-02-09 09:41:10.650348 [info] Host is running unRAID
2023-02-09 09:41:10.667978 [info] System information Linux ebe1b895cfe1 5.19.17-Unraid #2 SMP PREEMPT_DYNAMIC Wed Nov 2 11:54:15 PDT 2022 x86_64 GNU/Linux
2023-02-09 09:41:10.687433 [info] OS_ARCH defined as 'x86-64'
2023-02-09 09:41:10.706609 [info] PUID defined as '99'
2023-02-09 09:41:10.727778 [info] PGID defined as '100'
2023-02-09 09:41:10.750744 [info] UMASK defined as '000'
2023-02-09 09:41:10.769862 [info] Permissions already set for '/config'
2023-02-09 09:41:10.789738 [info] Deleting files in /tmp (non recursive)...
2023-02-09 09:41:10.813571 [info] VPN_ENABLED defined as 'yes'
2023-02-09 09:41:10.833582 [info] VPN_CLIENT defined as 'openvpn'
2023-02-09 09:41:10.852820 [info] VPN_PROV defined as 'pia'
Inconsistency detected by ld.so: ../sysdeps/x86_64/dl-machine.h: 487: elf_machine_rela_relative: Assertion `ELFW(R_TYPE) (reloc->r_info) == R_X86_64_RELATIVE' failed!
2023-02-09 09:41:10.871900 [warn] PIA VPN server info JSON cannot be downloaded from URL 'https://serverlist.piaservers.net/vpninfo/servers/v4' exit code from curl is '1'
2023-02-09 09:41:10.893308 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/ca_montreal.ovpn
2023-02-09 09:41:10.929344 [info] VPN remote server(s) defined as 'ca-montreal.privacy.network,'
2023-02-09 09:41:10.946485 [info] VPN remote port(s) defined as '1198,'
2023-02-09 09:41:10.963677 [info] VPN remote protcol(s) defined as 'udp,'
2023-02-09 09:41:10.983398 [info] VPN_DEVICE_TYPE defined as 'tun0'
2023-02-09 09:41:11.002738 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2023-02-09 09:41:11.021933 [info] LAN_NETWORK defined as '192.168.1.0/24'
2023-02-09 09:41:11.041212 [info] NAME_SERVERS defined as '84.200.69.80,37.235.1.174,1.1.1.1,37.235.1.177,84.200.70.40,1.0.0.1'
2023-02-09 09:41:11.060352 [info] VPN_USER defined as '***'
2023-02-09 09:41:11.079583 [info] VPN_PASS defined as '***'
2023-02-09 09:41:11.098860 [info] STRICT_PORT_FORWARD defined as 'yes'
2023-02-09 09:41:11.118167 [info] ENABLE_PRIVOXY defined as 'yes'
2023-02-09 09:41:11.139507 [info] VPN_INPUT_PORTS not defined (via -e VPN_INPUT_PORTS), skipping allow for custom incoming ports
2023-02-09 09:41:11.158851 [info] VPN_OUTPUT_PORTS not defined (via -e VPN_OUTPUT_PORTS), skipping allow for custom outgoing ports
2023-02-09 09:41:11.178473 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2023-02-09 09:41:11.198140 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2023-02-09 09:41:11.217553 [info] DELUGE_ENABLE_WEBUI_PASSWORD not defined,(via -e DELUGE_ENABLE_WEBUI_PASSWORD), defaulting to 'yes'
2023-02-09 09:41:11.237130 [info] Starting Supervisor...

Reboot of unraid seems to resolved it. Not sure whats going on.

Canes · February 10, 2023

On 2/7/2023 at 10:02 PM, BillR said:
Same issue here since the latest update.

Can someone guess which option might be unrecognised in my .ovpn file? Or is there a list of depreciated options in this latest version somewhere so I can figure it out for myself? Here's the config in my .ovpn file:
dev tun
fast-io
persist-key
nobind
remote (Hidden)

remote-random
pull
comp-lzo no
tls-client
verify-x509-name Server name-prefix
ns-cert-type server
key-direction 1
route-delay 2
tun-mtu 1500
fragment 1300
mssfix 1200
verb 3
cipher AES-256-CBC
keysize 256
auth SHA512
sndbuf 524288
rcvbuf 524288
auth-user-pass credentials.conf
Any help would be most appreciated.

I could not access WebUI after latest update I put through today. I found this thread, deleted the line "keysize 256" in Krusader and saved the file. Restarted deluge docker and WebUI came up within 30 seconds. Sorry, not sure if you tried this already but that at least worked for me and your file text looks like mine.

BillR · February 10, 2023

4 hours ago, Canes said:

I could not access WebUI after latest update I put through today. I found this thread, deleted the line "keysize 256" in Krusader and saved the file. Restarted deluge docker and WebUI came up within 30 seconds. Sorry, not sure if you tried this already but that at least worked for me and your file text looks like mine.

Yes, I figured this out too, as per my earlier post:

NotABanana · February 10, 2023

I'm fairly new to using unraid and docker so this may be user error, but I set this up with mullvad, and cannot access the webui, it just times out. The webui works if I disable the VPN, and the VPN is otherwise working (Checked via console)

Edited February 10, 2023 by NotABanana

Canes · February 10, 2023

2 hours ago, BillR said:

Yes, I figured this out too, as per my earlier post:

Sorry, missed your later reply as was probably scrolling thread too quickly. Glad you got it fixed.

BillR · February 10, 2023

2 hours ago, Canes said:

Sorry, missed your later reply as was probably scrolling thread too quickly. Glad you got it fixed.

Thanks mate, you too. I can't help but think that if there was a list of the depreciated .ovpn entries somewhere, we all might have found our solutions a bit quicker/easier. It's very interesting to read through this thread and see the different entries that have affected different people, presumably depending on what VPN provider they're using. There must have been quite a large number of depreciated features in this particular update to have affected a number of us like it has.

binhex · February 10, 2023

7 minutes ago, BillR said:

Thanks mate, you too. I can't help but think that if there was a list of the depreciated .ovpn entries somewhere, we all might have found our solutions a bit quicker/easier. It's very interesting to read through this thread and see the different entries that have affected different people, presumably depending on what VPN provider they're using. There must have been quite a large number of depreciated features in this particular update to have affected a number of us like it has.

you mean like this? 🙂 https://community.openvpn.net/openvpn/wiki/DeprecatedOptions#Option:--ncp-disableStatus:RemovedinOpenVPNv2.6

i can't take the credit for that link, it was posted on a github issue on the delugevpn repo.

BillR · February 10, 2023

38 minutes ago, binhex said:

you mean like this? 🙂 https://community.openvpn.net/openvpn/wiki/DeprecatedOptions#Option:--ncp-disableStatus:RemovedinOpenVPNv2.6

i can't take the credit for that link, it was posted on a github issue on the delugevpn repo.

Yes, exactly like that! 😆 Thank you - that will be most helpful to anyone else looking for the offending option in their .OVPN file. Would have been nice if the OVPN devs had coded their app to ignore depreciated options rather than throw a king-sized spanner in the works. But then, I admit to being a pleb who knows diddly squat about how these things work 😜

BillR · February 10, 2023

4 hours ago, NotABanana said:

I'm fairly new to using unraid and docker so this may be user error, but I set this up with mullvad, and cannot access the webui, it just times out. The webui works if I disable the VPN, and the VPN is otherwise working (Checked via console)

First, a banana would know exactly how to fix this 😁 Second, what is showing in your logs?

Toxicseagull · February 10, 2023

Another Mullvad user here. Set up has been working fine for a year but I realised i didnt get a new release via my *arrs and I'm unable to get into deluge webui and all my *arrs cannot connect anymore. Any idea? my opn vpn config file doesnt have any keysize 256 line to delete running 6.9.2.

Spoiler

2023-02-10 21:26:13.734358 [info] Host is running unRAID
2023-02-10 21:26:13.756841 [info] System information Linux abe7deda8009 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
2023-02-10 21:26:13.781625 [info] OS_ARCH defined as 'x86-64'
2023-02-10 21:26:13.804919 [info] PUID defined as '99'
2023-02-10 21:26:13.829135 [info] PGID defined as '100'
2023-02-10 21:26:13.866072 [info] UMASK defined as '000'
2023-02-10 21:26:13.889287 [info] Permissions already set for '/config'
2023-02-10 21:26:13.910190 [info] Deleting files in /tmp (non recursive)...
2023-02-10 21:26:13.938767 [info] VPN_ENABLED defined as 'yes'
2023-02-10 21:26:13.961989 [info] VPN_CLIENT defined as 'openvpn'
2023-02-10 21:26:13.984705 [info] VPN_PROV defined as 'custom'
2023-02-10 21:26:14.011486 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/mullvad_gb_all.ovpn
2023-02-10 21:26:14.278805 [info] VPN remote server(s) defined as 'gb-lon-102.mullvad.net,gb-lon-002.mullvad.net,gb-lon-008.mullvad.net,gb-mnc-103.mullvad.net,gb-lon-009.mullvad.net,gb-lon-003.mullvad.net,gb-lon-006.mullvad.net,gb-mnc-106.mullvad.net,gb-lon-005.mullvad.net,gb-mnc-101.mullvad.net,gb-lon-101.mullvad.net,gb-lon-004.mullvad.net,gb-lon-001.mullvad.net,gb-mnc-102.mullvad.net,'
2023-02-10 21:26:14.297758 [info] VPN remote port(s) defined as '1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,'
2023-02-10 21:26:14.318823 [info] VPN remote protcol(s) defined as 'udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,'
2023-02-10 21:26:14.339627 [info] VPN_DEVICE_TYPE defined as 'tun0'
2023-02-10 21:26:14.361678 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2023-02-10 21:26:14.381992 [info] LAN_NETWORK defined as '192.168.1.0/24,192.168.0.16/24'
2023-02-10 21:26:14.404363 [info] NAME_SERVERS defined as '84.200.69.80,37.235.1.174,1.1.1.1,37.235.1.177,84.200.70.40,1.0.0.1'
2023-02-10 21:26:14.428057 [info] VPN_USER defined as 'xxxx'
2023-02-10 21:26:14.451552 [info] VPN_PASS defined as 'xxxx'
2023-02-10 21:26:14.472235 [info] ENABLE_PRIVOXY defined as 'no'
2023-02-10 21:26:14.498858 [info] VPN_INPUT_PORTS defined as '8989,9117,7878,6881,8112,8686,9696'
2023-02-10 21:26:14.521400 [info] VPN_OUTPUT_PORTS defined as '8989,9117,7878,6881,8112,8686,9696'
2023-02-10 21:26:14.546310 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2023-02-10 21:26:14.570384 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2023-02-10 21:26:14.594721 [info] DELUGE_ENABLE_WEBUI_PASSWORD not defined,(via -e DELUGE_ENABLE_WEBUI_PASSWORD), defaulting to 'yes'
2023-02-10 21:26:14.616270 [info] Starting Supervisor...
2023-02-10 21:26:14,746 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2023-02-10 21:26:14,746 INFO Set uid to user 0 succeeded
2023-02-10 21:26:14,747 INFO supervisord started with pid 8
2023-02-10 21:26:15,751 INFO spawned: 'start-script' with pid 390
2023-02-10 21:26:15,755 INFO spawned: 'watchdog-script' with pid 391
2023-02-10 21:26:15,756 INFO reaped unknown pid 9 (exit status 0)
2023-02-10 21:26:15,763 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2023-02-10 21:26:15,763 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2023-02-10 21:26:15,764 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2023-02-10 21:26:15,819 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2023-02-10 21:26:15,823 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2023-02-10 21:26:15,827 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2023-02-10 21:26:15,832 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2023-02-10 21:26:15,836 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2023-02-10 21:26:15,839 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2023-02-10 21:29:32,006 DEBG 'start-script' stdout output:
[crit] 'gb-lon-102.mullvad.net' cannot be resolved, possible DNS issues, exiting...

2023-02-10 21:29:32,007 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22394502605520 for <Subprocess at 22394502601392 with name start-script in state RUNNING> (stdout)>
2023-02-10 21:29:32,007 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22394502596400 for <Subprocess at 22394502601392 with name start-script in state RUNNING> (stderr)>
2023-02-10 21:29:32,008 WARN exited: start-script (exit status 1; not expected)
2023-02-10 21:29:32,008 DEBG received SIGCHLD indicating a child quit

binhex · February 11, 2023

Another Mullvad user here. Set up has been working fine for a year but I realised i didnt get a new release via my *arrs and I'm unable to get into deluge webui and all my *arrs cannot connect anymore. Any idea? my opn vpn config file doesnt have any keysize 256 line to delete running 6.9.2.

Spoiler

2023-02-10 21:26:13.734358 [info] Host is running unRAID
2023-02-10 21:26:13.756841 [info] System information Linux abe7deda8009 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
2023-02-10 21:26:13.781625 [info] OS_ARCH defined as 'x86-64'
2023-02-10 21:26:13.804919 [info] PUID defined as '99'
2023-02-10 21:26:13.829135 [info] PGID defined as '100'
2023-02-10 21:26:13.866072 [info] UMASK defined as '000'
2023-02-10 21:26:13.889287 [info] Permissions already set for '/config'
2023-02-10 21:26:13.910190 [info] Deleting files in /tmp (non recursive)...
2023-02-10 21:26:13.938767 [info] VPN_ENABLED defined as 'yes'
2023-02-10 21:26:13.961989 [info] VPN_CLIENT defined as 'openvpn'
2023-02-10 21:26:13.984705 [info] VPN_PROV defined as 'custom'
2023-02-10 21:26:14.011486 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/mullvad_gb_all.ovpn
2023-02-10 21:26:14.278805 [info] VPN remote server(s) defined as 'gb-lon-102.mullvad.net,gb-lon-002.mullvad.net,gb-lon-008.mullvad.net,gb-mnc-103.mullvad.net,gb-lon-009.mullvad.net,gb-lon-003.mullvad.net,gb-lon-006.mullvad.net,gb-mnc-106.mullvad.net,gb-lon-005.mullvad.net,gb-mnc-101.mullvad.net,gb-lon-101.mullvad.net,gb-lon-004.mullvad.net,gb-lon-001.mullvad.net,gb-mnc-102.mullvad.net,'
2023-02-10 21:26:14.297758 [info] VPN remote port(s) defined as '1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,1195,'
2023-02-10 21:26:14.318823 [info] VPN remote protcol(s) defined as 'udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,udp,'
2023-02-10 21:26:14.339627 [info] VPN_DEVICE_TYPE defined as 'tun0'
2023-02-10 21:26:14.361678 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2023-02-10 21:26:14.381992 [info] LAN_NETWORK defined as '192.168.1.0/24,192.168.0.16/24'
2023-02-10 21:26:14.404363 [info] NAME_SERVERS defined as '84.200.69.80,37.235.1.174,1.1.1.1,37.235.1.177,84.200.70.40,1.0.0.1'
2023-02-10 21:26:14.428057 [info] VPN_USER defined as 'xxxx'
2023-02-10 21:26:14.451552 [info] VPN_PASS defined as 'xxxx'
2023-02-10 21:26:14.472235 [info] ENABLE_PRIVOXY defined as 'no'
2023-02-10 21:26:14.498858 [info] VPN_INPUT_PORTS defined as '8989,9117,7878,6881,8112,8686,9696'
2023-02-10 21:26:14.521400 [info] VPN_OUTPUT_PORTS defined as '8989,9117,7878,6881,8112,8686,9696'
2023-02-10 21:26:14.546310 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2023-02-10 21:26:14.570384 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2023-02-10 21:26:14.594721 [info] DELUGE_ENABLE_WEBUI_PASSWORD not defined,(via -e DELUGE_ENABLE_WEBUI_PASSWORD), defaulting to 'yes'
2023-02-10 21:26:14.616270 [info] Starting Supervisor...
2023-02-10 21:26:14,746 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2023-02-10 21:26:14,746 INFO Set uid to user 0 succeeded
2023-02-10 21:26:14,747 INFO supervisord started with pid 8
2023-02-10 21:26:15,751 INFO spawned: 'start-script' with pid 390
2023-02-10 21:26:15,755 INFO spawned: 'watchdog-script' with pid 391
2023-02-10 21:26:15,756 INFO reaped unknown pid 9 (exit status 0)
2023-02-10 21:26:15,763 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2023-02-10 21:26:15,763 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2023-02-10 21:26:15,764 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2023-02-10 21:26:15,819 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2023-02-10 21:26:15,823 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2023-02-10 21:26:15,827 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2023-02-10 21:26:15,832 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2023-02-10 21:26:15,836 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2023-02-10 21:26:15,839 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2023-02-10 21:29:32,006 DEBG 'start-script' stdout output:
[crit] 'gb-lon-102.mullvad.net' cannot be resolved, possible DNS issues, exiting...

2023-02-10 21:29:32,007 DEBG fd 8 closed, stopped monitoring (stdout)>
2023-02-10 21:29:32,007 DEBG fd 10 closed, stopped monitoring (stderr)>
2023-02-10 21:29:32,008 WARN exited: start-script (exit status 1; not expected)
2023-02-10 21:29:32,008 DEBG received SIGCHLD indicating a child quit

That host no longer resolves, switch to another VPN endpoint:-
[crit] 'gb-lon-102.mullvad.net' cannot be resolved, possible DNS issues, exiting...

Sent from my 22021211RG using Tapatalk

jontron · February 11, 2023

Alright, finally posting in here because I can't figure this thing out.

This morning I updated to Unraid 6.11.5 from 6.9.X and now my DelugeVPN docker isn't allowing access to WebUI.

Using PIA VPN in case that matters.

Here's my logs

2023-02-11 07:44:51,033 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 TCP/UDP: Preserving recently used remote address: [AF_INET]79.142.79.67:1198

2023-02-11 07:44:51,033 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 UDPv4 link local: (not bound)
2023-02-11 07:44:51 UDPv4 link remote: [AF_INET]79.142.79.67:1198

2023-02-11 07:44:51,528 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 [zurich412] Peer Connection Initiated with [AF_INET]79.142.79.67:1198

2023-02-11 07:44:51,653 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 TUN/TAP device tun0 opened
2023-02-11 07:44:51 net_iface_mtu_set: mtu 1500 for tun0
2023-02-11 07:44:51 net_iface_up: set tun0 up

2023-02-11 07:44:51,653 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 net_addr_v4_add: 10.8.112.139/24 dev tun0
2023-02-11 07:44:51 /root/openvpnup.sh tun0 1500 0 10.8.112.139 255.255.255.0 init

2023-02-11 07:44:51,656 DEBG 'start-script' stdout output:
2023-02-11 07:44:51 Initialization Sequence Completed

2023-02-11 07:45:28,869 DEBG 'start-script' stdout output:
[info] Attempting to get external IP using 'http://checkip.amazonaws.com'...

2023-02-11 07:45:34,342 DEBG 'start-script' stdout output:
[info] Successfully retrieved external IP address 79.142.79.67

2023-02-11 07:45:34,345 DEBG 'start-script' stdout output:
[info] Script started to assign incoming port

2023-02-11 07:45:34,345 DEBG 'start-script' stdout output:
[info] Port forwarding is enabled
[info] Checking endpoint 'swiss.privacy.network' is port forward enabled...

2023-02-11 07:46:02,372 DEBG 'start-script' stdout output:
[warn] PIA VPN info API currently down, skipping endpoint port forward check

2023-02-11 07:46:10,945 DEBG 'watchdog-script' stdout output:
[info] Deluge listening interface IP 0.0.0.0 and VPN provider IP 10.8.112.139 different, marking for reconfigure

2023-02-11 07:46:10,950 DEBG 'watchdog-script' stdout output:
[info] Deluge not running

2023-02-11 07:46:10,954 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI not running

2023-02-11 07:46:10,958 DEBG 'watchdog-script' stdout output:
[info] Privoxy not running

2023-02-11 07:46:10,958 DEBG 'watchdog-script' stdout output:
[info] Deluge incoming port 6890 and VPN incoming port 59731 different, marking for reconfigure
[info] Attempting to start Deluge...
[info] Removing deluge pid file (if it exists)...

2023-02-11 07:46:10,960 DEBG 'watchdog-script' stderr output:
rm: cannot remove '/config/deluged.pid'
2023-02-11 07:46:10,960 DEBG 'watchdog-script' stderr output:
: Permission denied

2023-02-11 07:46:11,151 DEBG 'watchdog-script' stdout output:
[warn] Deluge config file /config/core.conf does not contain valid data, exiting Python script config_deluge.py...

2023-02-11 07:46:11,193 DEBG 'start-script' stdout output:
[info] Successfully assigned and bound incoming port '59731'

2023-02-11 07:46:11,371 DEBG 'watchdog-script' stdout output:
[warn] Deluge config file /config/core.conf does not contain valid data, exiting Python script config_deluge.py...

2023-02-11 07:46:11,399 DEBG 'watchdog-script' stderr output:
cat: /config/hostlist.conf: Permission denied

2023-02-11 07:46:11,587 DEBG 'watchdog-script' stdout output:
[warn] Deluge config file /config/web.conf does not contain valid data, exiting Python script config_deluge.py...

2023-02-11 07:46:11,906 DEBG 'watchdog-script' stdout output:
[info] Deluge process started
[info] Waiting for Deluge process to start listening on port 58846...

2023-02-11 08:01:11,616 DEBG 'start-script' stdout output:
[info] Successfully assigned and bound incoming port '59731'

2023-02-11 08:16:12,039 DEBG 'start-script' stdout output:
[info] Successfully assigned and bound incoming port '59731'

Any help would be greatly appreciated. I've read through a bunch of pages in this thread and I still don't know the correct fix. It's probably something super easy. I'm just savvy enough to be dangerous to myself when it comes to docker

Toxicseagull · February 11, 2023

7 hours ago, binhex said:

That host no longer resolves, switch to another VPN endpoint:-
[crit] 'gb-lon-102.mullvad.net' cannot be resolved, possible DNS issues, exiting...

Sent from my 22021211RG using Tapatalk

Ah, i assumed since theres another 15 odd options in the config file that it would just move on to a different server.

so I should delete that server from the config and try another? Thanks for your help.

krazykraz01 · February 11, 2023

On 2/6/2023 at 1:21 PM, binhex said:

you are using a password protected keyfile, you need to remove the pass phrase from the key (cert)

Thank you for getting back to me. Just following up that I had got by the last few days by rolling back the version. I switched back to latest, removed the keysize line, and removed the certificate information from the bottom of the text file - this fixed the issue, for anyone who may end up here via Google. My VPN is ExpressVPN, FWIW.

binhex · February 11, 2023

Ah, i assumed since theres another 15 odd options in the config file that it would just move on to a different server.

so I should delete that server from the config and try another? Thanks for your help.

Yes

Sent from my 22021211RG using Tapatalk

NeoSys · February 12, 2023

I cant find in any file the "keysize 256" to delete. Is there a way that I can just go back to the version that did not have this problem. I should know better by now if its working why update it but sure enough did it again.

Please any advise would help.

Edited February 12, 2023 by NeoSys

BillR · February 12, 2023

4 hours ago, NeoSys said:

I cant find in any file the "keysize 256" to delete. Is there a way that I can just go back to the version that did not have this problem. I should know better by now if its working why update it but sure enough did it again.

Please any advise would help.

That's just one of the depreciated options. Look for any of the options listed here: https://community.openvpn.net/openvpn/wiki/DeprecatedOptions (thanks to binhex for the link)

Remove anything from your .ovpn file that is in the list of removed options.

Edited February 12, 2023 by BillR
Clarified the file that needs to be edited

NeoSys · February 12, 2023

client
remote 87-1-us.cg-dialup.net 443
dev tun 
proto udp
auth-user-pass


resolv-retry infinite 
redirect-gateway def1
persist-key
persist-tun
nobind
cipher AES-256-CBC
ncp-disable
auth SHA256
ping 5
ping-exit 60
ping-timer-rem
explicit-exit-notify 2
script-security 2
remote-cert-tls server
route-delay 5
verb 4


ca ca.crt

cert client.crt

key client.key

Thia is what my openvpn file has I dont see anything to remove cant I just go back to the working version?

Edited February 12, 2023 by NeoSys

strike · February 12, 2023

14 minutes ago, NeoSys said:

client
remote 87-1-us.cg-dialup.net 443
dev tun 
proto udp
auth-user-pass


resolv-retry infinite 
redirect-gateway def1
persist-key
persist-tun
nobind
cipher AES-256-CBC
ncp-disable
auth SHA256
ping 5
ping-exit 60
ping-timer-rem
explicit-exit-notify 2
script-security 2
remote-cert-tls server
route-delay 5
verb 4


ca ca.crt

cert client.crt

key client.key

Thia is what my openvpn file has I dont see anything to remove cant I just go back to the working version?

Remove or comment out "ncp-disable", it was on the list in the link posted earlier.

NeoSys · February 12, 2023

32 minutes ago, strike said:

Remove or comment out "ncp-disable", it was on the list in the link posted earlier.

I removed it but still not coming up if i turn vpn off it works with it it times out. Even though the log says "Deluge Web UI started"


2023-02-12 00:45:18,340 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI not running

2023-02-12 00:45:18,341 DEBG 'watchdog-script' stdout output:
[info] Attempting to start Deluge...
[info] Removing deluge pid file (if it exists)...

2023-02-12 00:45:19,201 DEBG 'watchdog-script' stdout output:
[info] Deluge key 'listen_interface' currently has an undefined value
[info] Deluge key 'listen_interface' will have a new value '10.31.4.240'
[info] Writing changes to Deluge config file '/config/core.conf'...

2023-02-12 00:45:19,895 DEBG 'watchdog-script' stdout output:
[info] Deluge key 'outgoing_interface' currently has an undefined value
[info] Deluge key 'outgoing_interface' will have a new value 'tun0'
[info] Writing changes to Deluge config file '/config/core.conf'...

2023-02-12 00:45:20,329 DEBG 'watchdog-script' stdout output:
[info] Deluge key 'default_daemon' currently has a value of '59b63b81459a4e559df0901a000d141e'
[info] Deluge key 'default_daemon' will have a new value '59b63b81459a4e559df0901a000d141e'
[info] Writing changes to Deluge config file '/config/web.conf'...

2023-02-12 00:45:21,025 DEBG 'watchdog-script' stdout output:
[info] Deluge process started
[info] Waiting for Deluge process to start listening on port 58846...

2023-02-12 00:45:21,478 DEBG 'watchdog-script' stdout output:
[info] Deluge process listening on port 58846

2023-02-12 00:45:26,578 DEBG 'watchdog-script' stderr output:
<Deferred at 0x1465e97e6ce0 current result: None>

2023-02-12 00:45:26,728 DEBG 'watchdog-script' stdout output:
[info] No torrents with state 'Error' found

2023-02-12 00:45:26,729 DEBG 'watchdog-script' stdout output:
[info] Starting Deluge Web UI...

2023-02-12 00:45:26,729 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI started

strike · February 12, 2023

3 minutes ago, NeoSys said:

I removed it but still not coming up if i turn vpn off it works with it it times out. Even though the log says "Deluge Web UI started"

Do this: https://github.com/binhex/documentation/blob/master/docker/faq/help.md

NeoSys · February 12, 2023

5 minutes ago, strike said:

Do this: https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Thank you so much for the help your first post solved it turns out i had an ip conflict after fixing that it came right up. Again Thank You so much for taking the time to help me.

strike · February 12, 2023

1 minute ago, NeoSys said:

Thank you so much for the help your first post solved it turns out i had an ip conflict after fixing that it came right up. Again Thank You so much for taking the time to help me.

Glad you got it fixed

[Support] binhex - DelugeVPN

Recommended Posts

Link to comment

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ryanoc3ros

Dad_Rage

binhex

Posted Images

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Join the conversation