CHBMB Posted June 2, 2018 Share Posted June 2, 2018 5 hours ago, nZero said: Small thing I just noticed, if ruTorrent creates the folder (say, moving torrents from /test/ -> /test/sub/ when sub isn't already created) it creates the folder with 755, owner of nobody, meaning that even if unraid has permissions set, you can't write to it. I can just set newperms or set folder permissions to 777, but I'd prefer not having to if possible. Also rtfm https://github.com/Novik/ruTorrent/wiki/Config#configphp Quote Link to comment
Spies Posted June 2, 2018 Share Posted June 2, 2018 (edited) Would I run into any obvious issues by having my downloads folder on my NAS and using Unassigned Devices to map it into the docker container? My cache drive is used for a lot and torrents require a lot of i/o, the local network is 1gbit. Edited June 2, 2018 by Spies Quote Link to comment
trurl Posted June 2, 2018 Share Posted June 2, 2018 Just now, Spies said: Would I run into any obvious issues by having my downloads folder on my NAS and using Unassigned Devices to map it into the docker container? I assume you mean your NAS is another server not your unRAID NAS server. It should work fine but see the docker FAQ for some hints on mapping Unassigned Devices. 1 Quote Link to comment
Sin Posted June 2, 2018 Share Posted June 2, 2018 hello, i can not modify the following folder: Save path on the webUI: /downloads/incoming (right click, save to.. and nothing happens, i think the correct webui save path should be: /incoming/ ) unraid container settings: Container path: /Torrent/ host path: /mnt/user/DataArray/ the second issue is, (transmisson worked fine on the same port settings) 51413 (default) "port is closed" appears and download progress (and seed, the seed shouldnt be working on the "wrong" path settings..) does not work. it was working fine in the last week.. but (since the last update?) it has been broken somewhere.. (is it possilbe to revert "manually" from unraid CA ? ) thank you! Quote Link to comment
trurl Posted June 2, 2018 Share Posted June 2, 2018 1 minute ago, Sin said: hello, i can not modify the following folder: Save path on the webUI: /downloads/incoming (right click, save to.. and nothing happens, i think the correct webui save path should be: /incoming/ ) unraid container settings: Container path: /Torrent/ host path: /mnt/user/DataArray/ the second issue is, (transmisson worked fine on the same port settings) 51413 (default) "port is closed" appears and download progress (and seed, the seed shouldnt be working on the "wrong" path settings..) does not work. it was working fine in the last week.. but (since the last update?) it has been broken somewhere.. (is it possilbe to revert "manually" from unraid CA ? ) thank you! Post your docker run command as seen in the docker FAQ. If that is all the mappings you have for this then /downloads isn't mapped nor is /incoming. Quote Link to comment
nZero Posted June 2, 2018 Share Posted June 2, 2018 (edited) 6 hours ago, CHBMB said: Also rtfm https://github.com/Novik/ruTorrent/wiki/Config#configphp Profile mask is already set to 0777, but it still applies 0755. Changing the mask and restarting the docker doesn't change the folder permissions it gives to new folders Edited June 2, 2018 by nZero Quote Link to comment
Sin Posted June 2, 2018 Share Posted June 2, 2018 "If that is all the mappings.. " heres what i mean Quote Link to comment
Sin Posted June 2, 2018 Share Posted June 2, 2018 2 independent unraid server, same issue with rutorrent update, without any changes(!). remove, reinstall, remove appdata, reinstall with default path settings, edit path ..somewhere else, "/" without "/" , etc -> nothing.. so. is it possible to revert? ive installed other clients (qbit, transmission) and everything went fine. Quote Link to comment
trurl Posted June 2, 2018 Share Posted June 2, 2018 2 hours ago, Sin said: "If that is all the mappings.. " heres what i mean That screenshot indicates the Container path is /Torrent/, not /downloads. You even highlighted that fact. Quote Link to comment
Sin Posted June 2, 2018 Share Posted June 2, 2018 Yes:) and this is my problem. step by step.. fresh install. 0. remove rutorrent, clean appdata. 1. CA / find rutorrent / press download 2. On the "Add container" screen i set the following ("edit configuration") Select container path.. Container path:/Torrenthost path:/mnt/user/DataArray/ 3. Save, Apply. (now i have a clean rutorrent) 4. Start WebUI and add new torrent >>>>> wrong save path appears on the webUI. So the next-next finish "installer" in this new/updated version does not work correclty. and thank you btw, ill try to modify manually the rutorrent.rc Quote Link to comment
karateo Posted June 11, 2018 Share Posted June 11, 2018 Is auto un-packing working for anyone? If I manually right click->Unpack it works. I have ticked auto-unpack and my filter is /.*/ Quote Link to comment
karateo Posted June 14, 2018 Share Posted June 14, 2018 I am complete lost with this. I don't know how to troubleshoot! Nobody using rutorrent anymore? Quote Link to comment
Spies Posted June 14, 2018 Share Posted June 14, 2018 Mine works fine with the box ticked and /.*/ 1 Quote Link to comment
KoNeko Posted June 17, 2018 Share Posted June 17, 2018 (edited) I have a problem with the RSS feed not beeing updated. i have to manual update it. When i disable some settings like in below picture it seems to work. But once i close the browser window it refert back to the old settings and i cant find what to add to thte rtorrent.rc to uncheck optiosn like session_lock and session con completion last one not sure if that is needed but the session_lock is. Edited June 17, 2018 by KoNeko Quote Link to comment
Spies Posted June 17, 2018 Share Posted June 17, 2018 (edited) On 6/14/2018 at 8:47 AM, karateo said: I am complete lost with this. I don't know how to troubleshoot! Nobody using rutorrent anymore? On 6/14/2018 at 11:52 AM, Spies said: Mine works fine with the box ticked and /.*/ Correction, mine used to work, now it doesn't. Edit, my paths were not set correctly in radarr and sonarr, I think this was the cause. Edited June 17, 2018 by Spies Quote Link to comment
karateo Posted June 18, 2018 Share Posted June 18, 2018 10 hours ago, Spies said: Correction, mine used to work, now it doesn't. Edit, my paths were not set correctly in radarr and sonarr, I think this was the cause. Auto-unpack does not have anything to do with the rest of the server. It's only related to rutorrent as it unpacks a zipped file it has already downloaded. So the permissions are fine. I might change to the rutorrent-vpn docker just for this! Quote Link to comment
KoNeko Posted June 18, 2018 Share Posted June 18, 2018 On 6/17/2018 at 4:10 PM, KoNeko said: I have a problem with the RSS feed not beeing updated. i have to manual update it. When i disable some settings like in below picture it seems to work. But once i close the browser window it refert back to the old settings and i cant find what to add to thte rtorrent.rc to uncheck optiosn like session_lock and session con completion last one not sure if that is needed but the session_lock is. i added $updateInterval = 15; in the config.php and that also seems to have fixed it. But when the container is restarted it loses the 2 options i disable the session lock en de session on completion. When the container is restarted those 2 are on/enabled again. Quote Link to comment
user457453944 Posted June 24, 2018 Share Posted June 24, 2018 Any news on updating this to the new rTorrent version? Quote Link to comment
Remy Lind Posted June 30, 2018 Share Posted June 30, 2018 On 9/14/2017 at 5:40 AM, gtroyp said: I am seeing very high CPU usage by rtorrent, 100% full use of a core. Can stop all torrents and usage doesn't change. Restart with torrents all stopped, goes right back to high usage. Seems like a runaway process. Anybody else? If not, where do I start to try and figure it out? UPDATE: Not sure if it's related, but I am getting occasional and intermittent errors on seeded files that the tracker reached timeout. That is probably an unrelated tracker issue, but might not be? I'm struggling with this too. I found out after som trial and error that --cpuset-cpus="7,23,8,24" (using 1950x) fixes the issue. Quote Link to comment
user457453944 Posted July 25, 2018 Share Posted July 25, 2018 (edited) Have not found the topic search function. Anyone got unix socket style connections to work on Sonarr using this docker? I cannot connect but I know my RPC connection works as Rutorrent and Electron both function. When I use rpc.php or httprpc I get false or no connection... Edited July 25, 2018 by user457453944 Quote Link to comment
balerdi Posted August 5, 2018 Share Posted August 5, 2018 (edited) hello first thanks for the great work you do here. i have a problem with the downloads doesnt start. rtorrent add downloads directly in pause. SOLVED Edited August 5, 2018 by balerdi Quote Link to comment
ct1996 Posted August 17, 2018 Share Posted August 17, 2018 (edited) Hello, adding downloads to ruTorrent seem to be causing tons of lag to the docker (refresh wheel frequently lighting up, normal usage never lights up) And i'm also getting terrible download speeds. It seems to 'freeze' everytime it sucessfully connects to a seed to download. Please advise? I have 550+ seeding with no issues. Just downloading. I'm currently using a different client to handle downloads and then this one for uploading. Edit: not sure if this matters (it is downloading to corrrect directory), but the bottom-left "Disk Available" counter is showing xx.xxG/20.00G used, so I believe its registering its path as inside the Docker image (which is 20GB?) .. but maybe i'm offbase! Thanks. Edit2: I will leave this up , but I believe the issue was my settings. Google "optimizing rtorrent" for understanding the settings and not just making assumptions like me. Wished peers/minimum peers should never be set to 0, I believe this caused my issue. (I still am using a seperate client as I like the other functionality but the issue is likely resolved) Edited August 19, 2018 by ct1996 Quote Link to comment
luutuananh Posted August 17, 2018 Share Posted August 17, 2018 Hi, a quick noob question. I can't write to folder that rtorrent are using to seed. How can I change that so I can write to that folder? Quote Link to comment
ct1996 Posted August 18, 2018 Share Posted August 18, 2018 (edited) 18 hours ago, luutuananh said: Hi, a quick noob question. I can't write to folder that rtorrent are using to seed. How can I change that so I can write to that folder? chmod -R 0777 /mnt/user/Media redirect folder name to w/e you need, it runs on ALL subdirectories, I just run it on my /Media root folder every couple days. Edited August 18, 2018 by ct1996 1 Quote Link to comment
andreidelait Posted August 23, 2018 Share Posted August 23, 2018 Updated mine today and now doesn't work anymore. No connection to rTorrent. Check if it is really running. Check $scgi_port and $scgi_host settings in config.php and scgi_port in rTorrent configuration file. I've tried last backup of appdata config but with no success. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.