Siwat2545 Posted February 6, 2019 Author Share Posted February 6, 2019 Oh, I thought you're talking about the H265 encoder version, if you mean the h265ize version, it is updated now, try force update in about 2 hours. - Siwat Quote Link to comment
jus7incase Posted February 16, 2019 Share Posted February 16, 2019 (edited) It would be great to have logging in the homebridge GUI container. I ooked for the log file but couldn't find it. also systemd is not running, so currently I saw no possibility to get the logs into the UI. If something doesn't work you definitely need the logs to solve the problem. Could you please extend the container to provide the logs and also set then in the initial config.json? Edited February 16, 2019 by jus7incase Quote Link to comment
Siwat2545 Posted February 16, 2019 Author Share Posted February 16, 2019 It would be great to have logging in the homebridge GUI container. I ooked for the log file but couldn't find it. also systemd is not running, so currently I saw no possibility to get the logs into the UI. If something doesn't work you definitely need the logs to solve the problem. Could you please extend the container to provide the logs and also set then in the initial config.json?Hi, I'm currently working on this, but in the mean time you can use the log in homebridge docker page in unraidSent from my Pixel 3 using Tapatalk Quote Link to comment
Kaizac Posted March 1, 2019 Share Posted March 1, 2019 (edited) When I give the Onlyoffice Community Edition it's own IP I can't access it anymore. What can I do to fix this? I don't want to host it on the same IP as my Unraid server. EDIT: never mind, Unraid kept going to the 8081 port instead of the 80/443 port. Got it working now. Edited March 1, 2019 by Kaizac Quote Link to comment
Kaizac Posted March 1, 2019 Share Posted March 1, 2019 Did someone get this working with Nextcloud? I've searched all over the internet, but can't find any solution. Only the line which I had to add which is 'onlyoffice' => array ( 'verify_peer_off' => TRUE, Which makes OnlyOffice connect, but fails when opening the file giving me an unknown error. 1 Quote Link to comment
Siwat2545 Posted March 8, 2019 Author Share Posted March 8, 2019 On 3/2/2019 at 5:08 AM, Kaizac said: Did someone get this working with Nextcloud? I've searched all over the internet, but can't find any solution. Only the line which I had to add which is 'onlyoffice' => array ( 'verify_peer_off' => TRUE, Which makes OnlyOffice connect, but fails when opening the file giving me an unknown error. I just give both onlyoffice and nextcloud a valid https certificate, also you need to disable encryption Quote Link to comment
spl147 Posted March 18, 2019 Share Posted March 18, 2019 i am having issues setting up logs for the HomebridgeUI docker, any tips? Quote Link to comment
Siwat2545 Posted March 18, 2019 Author Share Posted March 18, 2019 i am having issues setting up logs for the HomebridgeUI docker, any tips?Not at the momentSent from my Pixel 3 using Tapatalk Quote Link to comment
spl147 Posted April 6, 2019 Share Posted April 6, 2019 On 3/18/2019 at 10:53 AM, Siwat2545 said: Not at the moment Sent from my Pixel 3 using Tapatalk any updates on the logs? i ran touch /root/.homebridge/log/homebridge.log from the docker command line to get the log created but the container does not write to it, i can open it from the gui but it is empty Quote Link to comment
calebcoverdale Posted April 14, 2019 Share Posted April 14, 2019 I installed the Homebridge docker, but it seems to start and then turns off. Any advice? Quote Link to comment
Siwat2545 Posted April 15, 2019 Author Share Posted April 15, 2019 On 4/14/2019 at 7:58 AM, calebcoverdale said: I installed the Homebridge docker, but it seems to start and then turns off. Any advice? Logs would be very helpful Quote Link to comment
trurl Posted April 15, 2019 Share Posted April 15, 2019 On 4/13/2019 at 8:58 PM, calebcoverdale said: I installed the Homebridge docker, but it seems to start and then turns off. Any advice? https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 Quote Link to comment
spl147 Posted April 18, 2019 Share Posted April 18, 2019 still waiting on a fix for the logs issue! for hombridge with gui Quote Link to comment
Siwat2545 Posted April 19, 2019 Author Share Posted April 19, 2019 I am working on it right now. Sent from my Pixel 3 using Tapatalk Quote Link to comment
pingmanping Posted April 19, 2019 Share Posted April 19, 2019 How anyone gets the onlyoffice to work? I got the Linuxserver's letsencrypt container for my reverse proxy. I created /mnt/cache/appdata/letsencrypt/nginx/proxy-confs/onlyoffice.subdomain.conf with the following info: server { listen 443 ssl; server_name onlyoffice.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_docs onlyofficedocumentserver; proxy_pass https://$upstream_docs:443; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Host $server_name; proxy_set_header X-Forwarded-Proto $scheme; } } This is what I have on OnlyOffice Document Server: (see attached file) Also, I installed the OnlyOffice Community Server and what exactly goes to the Document Editing Service Address, Document Service address for requests from the Community Server and Community Server address for requests from the Document Service fields? When I opened the Document Server webUI, I get the page "cannot get /" I followed the instruction from https://hub.docker.com/r/onlyoffice/documentserver/ and generated the two keys that supposed to go to /var/www/onlyoffice/Data/certs/ Quote Link to comment
Siwat2545 Posted April 19, 2019 Author Share Posted April 19, 2019 How anyone gets the onlyoffice to work? I got the Linuxserver's letsencrypt container for my reverse proxy. I created /mnt/cache/appdata/letsencrypt/nginx/proxy-confs/onlyoffice.subdomain.conf with the following info:server { listen 443 ssl; server_name onlyoffice.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_docs onlyofficedocumentserver; proxy_pass https://$upstream_docs:443; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Host $server_name; proxy_set_header X-Forwarded-Proto $scheme; }} This is what I have on OnlyOffice Document Server: (see attached file) Also, I installed the OnlyOffice Community Server and what exactly goes to the Document Editing Service Address, Document Service address for requests from the Community Server and Community Server address for requests from the Document Service fields? When I opened the Document Server webUI, I get the page "cannot get /" I followed the instruction from https://hub.docker.com/r/onlyoffice/documentserver/ and generated the two keys that supposed to go to /var/www/onlyoffice/Data/certs/ You actually need to proxy pass it to port 4430 if you are using the ssl certificate, both documents server and community server need to be proxypassed to using ssl port (4430 And 4431 respectively)Sent from my Pixel 3 using Tapatalk Quote Link to comment
Squid Posted April 20, 2019 Share Posted April 20, 2019 re: H265ize Looks like spaces in the input / output paths aren't being parsed correctly. Not sure if this is your docker build, or the actual script though. Setting /input to be /mnt/user/Television/Old Seasons/.... results in an error of [h265ize]: Input /mnt/user/Television/Old does not exist. Whereas if you escape the spaces in the path (which isn't necessary under normal circumstances since unRaid tosses quotes around it) will work eg: /mnt/user/Television/Old\ Seasons/... Quote Link to comment
Siwat2545 Posted April 20, 2019 Author Share Posted April 20, 2019 re: H265ize Looks like spaces in the input / output paths aren't being parsed correctly. Not sure if this is your docker build, or the actual script though. Setting /input to be /mnt/user/Television/Old Seasons/.... results in an error of [h265ize]: Input /mnt/user/Television/Old does not exist. Whereas if you escape the spaces in the path (which isn't necessary under normal circumstances since unRaid tosses quotes around it) will work eg: /mnt/user/Television/Old\ Seasons/...Just fixed it (: Building now PS: my docker file is https://github.com/SiwatINC/h265ize_unraid/blob/master/DockerfileSent from my Pixel 3 using Tapatalk 1 Quote Link to comment
drzaph Posted April 20, 2019 Share Posted April 20, 2019 (edited) Last line of the homebridge install command have a typo in it? “root/.homrbridge/log.txt)” Should be “root/.homebridge/log.txt “ instead of homr? The docker won’t boot after the last update. Edited April 20, 2019 by drzaph Quote Link to comment
Siwat2545 Posted April 20, 2019 Author Share Posted April 20, 2019 Last line of the homebridge install command have a typo in it? “root/.homrbridge/log.txt)” Should be “root/.homebridge/log.txt “ instead of homr? The docker won’t boot after the last update. Sorry, I was rushing out the log update ToT just fixed it, building nowSent from my Pixel 3 using Tapatalk Quote Link to comment
drzaph Posted April 20, 2019 Share Posted April 20, 2019 Thanks for the quick update. I've installed it but still get the same setup errors (minus the homrbridge not found error). Here's an example of the logs Setting up libxi6:amd64 (2:1.7.9-1) ... Setting up libpgm-5.2-0:amd64 (5.2.122~dfsg-2) ... Setting up libxcb-present0:amd64 (1.13-2~ubuntu18.04) ... Setting up libglvnd0:amd64 (1.0.0-2ubuntu2.2) ... Setting up libxinerama1:amd64 (2:1.1.3-1) ... Setting up libxcb-dri2-0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-dri3-0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-glx0:amd64 (1.13-2~ubuntu18.04) ... Setting up libtwolame0:amd64 (0.3.13-3) ... Setting up libraw1394-11:amd64 (2.1.2-1) ... Setting up libx264-152:amd64 (2:0.152.2854+gite9a5903-2) ... Setting up libxcb-xfixes0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-render0:amd64 (1.13-2~ubuntu18.04) ... Setting up libopenjp2-7:amd64 (2.3.0-1) ... Setting up libasyncns0:amd64 (0.8-6) ... Setting up libxdamage1:amd64 (1:1.1.4-3) ... Setting up libxfixes3:amd64 (1:5.0.3-1) ... Setting up libpng16-16:amd64 (1.6.34-1ubuntu0.18.04.1) ... Quote Link to comment
Siwat2545 Posted April 21, 2019 Author Share Posted April 21, 2019 10 hours ago, drzaph said: Thanks for the quick update. I've installed it but still get the same setup errors (minus the homrbridge not found error). Here's an example of the logs Setting up libxi6:amd64 (2:1.7.9-1) ... Setting up libpgm-5.2-0:amd64 (5.2.122~dfsg-2) ... Setting up libxcb-present0:amd64 (1.13-2~ubuntu18.04) ... Setting up libglvnd0:amd64 (1.0.0-2ubuntu2.2) ... Setting up libxinerama1:amd64 (2:1.1.3-1) ... Setting up libxcb-dri2-0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-dri3-0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-glx0:amd64 (1.13-2~ubuntu18.04) ... Setting up libtwolame0:amd64 (0.3.13-3) ... Setting up libraw1394-11:amd64 (2.1.2-1) ... Setting up libx264-152:amd64 (2:0.152.2854+gite9a5903-2) ... Setting up libxcb-xfixes0:amd64 (1.13-2~ubuntu18.04) ... Setting up libxcb-render0:amd64 (1.13-2~ubuntu18.04) ... Setting up libopenjp2-7:amd64 (2.3.0-1) ... Setting up libasyncns0:amd64 (0.8-6) ... Setting up libxdamage1:amd64 (1:1.1.4-3) ... Setting up libxfixes3:amd64 (1:5.0.3-1) ... Setting up libpng16-16:amd64 (1.6.34-1ubuntu0.18.04.1) ... I'll look into it after I got back from work 🙂 Quote Link to comment
drzaph Posted April 21, 2019 Share Posted April 21, 2019 @Siwat2545 awesome. Thanks in advance. Quote Link to comment
Squid Posted April 21, 2019 Share Posted April 21, 2019 On 4/19/2019 at 10:27 PM, Siwat2545 said: Just fixed it 🙂 Building now PS: my docker file is https://github.com/SiwatINC/h265ize_unraid/blob/master/Dockerfile Sent from my Pixel 3 using Tapatalk Incidentally, still no update showing on the container, the last update on dockerHub shows something like 4 months ago, and the dockerFile listed there doesn't have the quoting. Another thing also if it's possible. Currently the script is storing the intermediate file within the docker.img. Not a problem when I'm doing source files of 1-4Gig, but I will eventually start on doing source files of 50Gig+, and then it will become an issue. Quote Link to comment
Siwat2545 Posted April 22, 2019 Author Share Posted April 22, 2019 Incidentally, still no update showing on the container, the last update on dockerHub shows something like 4 months ago, and the dockerFile listed there doesn't have the quoting. Another thing also if it's possible. Currently the script is storing the intermediate file within the docker.img. Not a problem when I'm doing source files of 1-4Gig, but I will eventually start on doing source files of 50Gig+, and then it will become an issue. Something definitely went wrong, I will fix it when I get home, apparently sudo apt-get -y install ffmpeg failed... weirdSent from my Pixel 3 using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.