saarg Posted June 21, 2019 Share Posted June 21, 2019 (edited) 11 minutes ago, binhex said: Your know I love you guys, hell I even run one of your images, not saying which Sent from my EML-L29 using Tapatalk LOL For educational purposes I guess 😁 Edited June 21, 2019 by saarg Quote Link to comment
binhex Posted June 21, 2019 Author Share Posted June 21, 2019 LOL For educational purposes I guess Oh of course! Keep your friends close and your enemies closer Sent from my EML-L29 using Tapatalk Quote Link to comment
saarg Posted June 21, 2019 Share Posted June 21, 2019 1 minute ago, binhex said: Oh of course! Keep your friends close and your enemies closer Sent from my EML-L29 using Tapatalk And we love you too 😘 1 Quote Link to comment
psi Posted July 11, 2019 Share Posted July 11, 2019 Is it possible to revert back to an older version? Quote Link to comment
binhex Posted July 11, 2019 Author Share Posted July 11, 2019 9 hours ago, psi said: Is it possible to revert back to an older version? Q5. from the following link:- https://github.com/binhex/documentation/blob/master/docker/faq/unraid.md Quote Link to comment
ProphetSe7en Posted July 13, 2019 Share Posted July 13, 2019 How can I use this with my nvidia 1060 card for hw acceleration and transcoding? Quote Link to comment
strike Posted July 13, 2019 Share Posted July 13, 2019 You need this: https://forums.unraid.net/topic/77813-plugin-linuxserverio-unraid-nvidia/ Quote Link to comment
ProphetSe7en Posted July 13, 2019 Share Posted July 13, 2019 (edited) Thank you, got it working with linuxserver, not with binhex. I enable it, but when I play a movie the settings gets reset. Is like all settings in the binhex container resets. When adding shared network folder I get an error. When adding the same path to linuxserver og binhex-emby there is no issue at all, only for binhex-jellyfin. Same goes for some of the other settings like use nfo, transcoding and some other stuff. nfs://unraid-server/mnt/user/shared/media/movies/ Edited July 13, 2019 by ProphetSe7en Quote Link to comment
_jonte Posted September 21, 2019 Share Posted September 21, 2019 Dusing installation, what should be put in for cache directory? Leave blank? Create a share? Quote Link to comment
Fiala06 Posted October 7, 2019 Share Posted October 7, 2019 Does this image auto update? Some reason I'm not able to get the latest 10.4.0 that was released 15 hrs ago. Quote Link to comment
Squid Posted October 7, 2019 Share Posted October 7, 2019 Does this image auto update? Some reason I'm not able to get the latest 10.4.0 that was released 15 hrs ago.General rule with binhex containers is that they do not auto update. If / when the update gets pushed to whatever repo he pulls from then an update to the container gets pushedSent from my NSA monitored device Quote Link to comment
Fiala06 Posted October 7, 2019 Share Posted October 7, 2019 18 minutes ago, Squid said: General rule with binhex containers is that they do not auto update. If / when the update gets pushed to whatever repo he pulls from then an update to the container gets pushed Sent from my NSA monitored device Perfect, thanks! Quote Link to comment
esoteradactyl Posted October 9, 2019 Share Posted October 9, 2019 Getting "Configuration not found. Was this container created using this plugin?" when trying to update this container. Quote Link to comment
Squid Posted October 9, 2019 Share Posted October 9, 2019 55 minutes ago, esoteradactyl said: Getting "Configuration not found. Was this container created using this plugin?" when trying to update this container. The xml doesn't exist / is corrupted in /config/plugins/dockerMan/templates-user Or your flash drive dropped offline. Quote Link to comment
yo39 Posted December 27, 2019 Share Posted December 27, 2019 After I disabled "allow remote connections" in Jellyfin I can't access the WebUI. It just says "forbidden". Is it because it's in the docker container that it thinks I'm trying to access it remotely, even though I'm on my local network? Is there anyway to regain access (maybe a command through the console?) or do I need to remove it and set it up again? Quote Link to comment
saarg Posted December 27, 2019 Share Posted December 27, 2019 2 hours ago, yo39 said: After I disabled "allow remote connections" in Jellyfin I can't access the WebUI. It just says "forbidden". Is it because it's in the docker container that it thinks I'm trying to access it remotely, even though I'm on my local network? Is there anyway to regain access (maybe a command through the console?) or do I need to remove it and set it up again? It's probably caused by docker having its own IP range and sees your local network as remote. There might be a settings file you can edit, but I do not know which or where. Might be better to ask jellyfin. Unless binhex knows. Quote Link to comment
Sundune Posted December 27, 2019 Share Posted December 27, 2019 (edited) 3 hours ago, yo39 said: After I disabled "allow remote connections" in Jellyfin I can't access the WebUI. It just says "forbidden". Is it because it's in the docker container that it thinks I'm trying to access it remotely, even though I'm on my local network? Is there anyway to regain access (maybe a command through the console?) or do I need to remove it and set it up again? The config file is located under appdata/binhex-jellyfin/config/system.xml on your Unraid Server. Path my vary depending on your setup. And change this line from false to true <EnableRemoteAccess>true</EnableRemoteAccess> I hope this works, i didn't try myself Edited December 27, 2019 by Sundune Information to Path location Quote Link to comment
yo39 Posted December 27, 2019 Share Posted December 27, 2019 9 hours ago, Sundune said: The config file is located under appdata/binhex-jellyfin/config/system.xml on your Unraid Server. Path my vary depending on your setup. And change this line from false to true <EnableRemoteAccess>true</EnableRemoteAccess> I hope this works, i didn't try myself Thanks, that did fix it! I only plan on using Jellyfin on my local network and that's why I tried disabling remote access. I'm trying to understand if it's now accessible from outside my network, although the ports it uses dont seem to be open to the internet. If I need to have remote connections enabled I may just set up the reverse proxy. Quote Link to comment
Sundune Posted December 27, 2019 Share Posted December 27, 2019 21 minutes ago, yo39 said: Thanks, that did fix it! I only plan on using Jellyfin on my local network and that's why I tried disabling remote access. I'm trying to understand if it's now accessible from outside my network, although the ports it uses dont seem to be open to the internet. If I need to have remote connections enabled I may just set up the reverse proxy. As long as you don't have the ports forwarded in your router and automatic port forwarding isn't enabled in your router, jellyfin shouldn't be accessible outside of your network. Glad you got it fixed Quote Link to comment
drjUnraid Posted January 3, 2020 Share Posted January 3, 2020 On 6/21/2019 at 6:44 AM, dee31797 said: Connected to the console of the container and installed the intel GPU driver just as a test. That won't work for long term use since every time the container is updated the driver won't be there. I believe the linuxserver jellyfin has intel support. Does the binhex version have the intel GPU support built in yet? Or is that still a linuxserver special? Quote Link to comment
[email protected] Posted January 26, 2020 Share Posted January 26, 2020 Hello All, I have the latest Docker of JellyFin (Version: 10.4.3) and it cannot seem to record from either of my HD HomeRuns. I successfully added each device, connected my 'Schedules Direct' account. Channels are found and mapped correctly. Does any one know what it takes to get this to work? Both HD HomeRuns work in Mythtv, Plex and Emby so it seems directly related to JellyFin and how I have it setup. I've attached some of my log file in case anyone asks. Thanks much. Jellyfin Logs.txt Quote Link to comment
binhex Posted January 28, 2020 Author Share Posted January 28, 2020 On 1/26/2020 at 8:35 PM, [email protected] said: Hello All, I have the latest Docker of JellyFin (Version: 10.4.3) and it cannot seem to record from either of my HD HomeRuns. I successfully added each device, connected my 'Schedules Direct' account. Channels are found and mapped correctly. Does any one know what it takes to get this to work? Both HD HomeRuns work in Mythtv, Plex and Emby so it seems directly related to JellyFin and how I have it setup. I've attached some of my log file in case anyone asks. Thanks much. Jellyfin Logs.txt 5.95 kB · 0 downloads as i dont own a HDHomeRun and the Jellyfin team know their software inside out i would advise you to raise a github 'issue' for this and see if they can help, link is shown in OP for 'application'. Quote Link to comment
karakorum Posted March 8, 2020 Share Posted March 8, 2020 Hey BH, thanks for the great releases. Any chance you can add "extra_hosts" to the template so we can input values in the GUI? Quote Link to comment
darckhart Posted April 1, 2020 Share Posted April 1, 2020 (edited) I recently updated the app (think it's on v10.5.2 now) and suddenly subtitles don't work anymore. Tried a few different browsers (Safari, Firefox, Chrome) and they're all busted. I played the same file from before update where subs did show, and now after update they don't show. Is this an issue I should file with the JF devs? edit: answered my own question with some searching on github. looks like they fixed the bug in the nightly. will hang tight for next update. https://github.com/jellyfin/jellyfin/issues/2650 Edited April 1, 2020 by darckhart Quote Link to comment
NitroNine Posted April 3, 2020 Share Posted April 3, 2020 (edited) I just set up Jellyfin Version: 10.5.2. I've added --runtime=nvidia in Extra Parameters and two variables. The first key NVIDIA_DRIVER_CAPABILITIES, value all, and the second is NVIDIA_VISIBLE_DEVICES and what's being reported for my GPU 0 UUID in the value. I enabled Nvidia NVENC and checked all boxes. But when I set a video to transcode, I don't get anything reported when I watch nvidia-smi. I've set up Plex the identical way and it shows in the smi output. Am I doing something wrong? EDIT - Figured it out, can't be done with binhex's version of Jellyfin. Edited April 5, 2020 by NitroNine Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.