ChatNoir

Updated yesterday evening without a hitch.

Change the owner to nobody as it should be.

You should simply select the first member of the Pool, scroll to the Balance Status section, select the BTRFS RAID profile you want in the drop down menu (RAID0 here) and hit the 'BALANCE' button. If that does not work, please attach your diagnostics to your next post.

It will not format anything.

There is an issue with format on 6.11.2. You should downgrade to 6.11.1 to add your drive(s). Then Go back to 6.11.2 or wait for 6.11.3.

When is the server failing to boot ? During Unraid's boot process or before ?

Did you made any disk assignement change since then ?

You could bind the device to VFIO (Tools/System devices) as you would do if you wanted to pass it through a VM. If you then reboot it should not be visible to the OS.

Please attach your diagnostics to your next post.

If it does not fix your issue, then

Unless you are actually using Unraid v5.x, you would be better off doing a new thread in the v6.x general support section and provide your diagnostics.

Any data drive cannot be larger that the Parity drive. As is, you cannot add data drives larger than 4TB. You could use your 16TB as parity and assign the (old) Parity drives as Data drives.

Please attach your diagnostics to your next post.

Check your docker configuration for the container that you are using, it should be clear on the path where it is storing its data. Then, you can delete the other folder, using Dynamix File Manager for exemple if you are on 6.10+

Pas de soucis sur le principe de double poster dans le cas d'un essai sur un forum en langue native et dans la section générale. Tu auras probablement plus de traction dans le forum général et tu es à priori en de bonne main dans l'autre sujet.

Also post the output of the syslog server as it will not be included in the diagnostics file.

I'm not in front of my server to provide screenshots but I am pretty sure that you can. If not select the one you want, you certainly select the shares and file type you want to exclude. Note that there are 2 different panels for the plugin, one in settings and one on the top tabs. I think that the fine settings are only accessible on the former.

I've heard on the forums of people being able to do that on some QNAP units, never heard anything about WD"s. You should try with a Trial licence and see what happens. Unraid is not installed but loaded into RAM from the USB flashdrive.

Normalement, quand tu installes un container docker, tu as un menu en bas que tu peux agrandir et qui indique quelles autres applications utilisent déjà un port. Dans ce cas là, il Diskspeed est configuré pour utiliser le port 18888, mais s'il y avait eu un problème parce qu'une autre application l'utilisait déjà, il suffit de changer la valeur dans le template (première image) et choisir un port libre. Au hasard 18811.

Not particularly with this CPU or generation that I know of, however Ryzen plateforms do have some quirks with linux. You should check this : https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

A short press on the power button should trigger a graceful shutdown, if your server is still operating somehow properly while both GUI and SSH crashed. Your diagnostics might show something and it they don't, you should set up a syslog server and attach that file after the next issue.

Please attach your diagnostics to your next post once the Extended SMART test finishes (it will include the test results, no need to add it separately).

I would guess that the files in that share are always in use when the system is started and the Mover is never able to move them. The docker image for example.

I use CA Backup / Restore Appdata. I use it for it's main purpose but there is a USB backup section. It is noted as Depreciated, but it is still functional.