BobPhoenix Posted July 9, 2016 Share Posted July 9, 2016 Would there be any reason not to buy this card? LSI-SAS-9210-8i I might get one myself. It looks like it should work fine once flashed to IT mode. Based on comparison here: http://www.servethehome.com/current-lsi-hba-controller-features-compared/ The only thing that might turn me off of them is that they come from China and I could swear I saw posts of counterfeit M1015s coming out of China on eBay. I read a lot of the feedback on that seller, no one has complained or mentioned about any counterfeits. Maybe worth checking out. How would you know if it's a counterfeit? Note This Is From Memory so may not be reliable. What I remember in the posts I saw was problems with drives dropping or other controller errors that were fixed by switching the drives to alternate controllers. Other than that I don't think there was a way. But as I said that is from memory and the whole issue may just be from my imagination and not be a fact unless someone else can remember the same posts and maybe provide a link. Those look like a good deal to me and as I said I may try to get one myself. Link to comment
blknitro11 Posted July 9, 2016 Share Posted July 9, 2016 Would there be any reason not to buy this card? LSI-SAS-9210-8i I might get one myself. It looks like it should work fine once flashed to IT mode. Based on comparison here: http://www.servethehome.com/current-lsi-hba-controller-features-compared/ The only thing that might turn me off of them is that they come from China and I could swear I saw posts of counterfeit M1015s coming out of China on eBay. I read a lot of the feedback on that seller, no one has complained or mentioned about any counterfeits. Maybe worth checking out. How would you know if it's a counterfeit? Note This Is From Memory so may not be reliable. What I remember in the posts I saw was problems with drives dropping or other controller errors that were fixed by switching the drives to alternate controllers. Other than that I don't think there was a way. But as I said that is from memory and the whole issue may just be from my imagination and not be a fact unless someone else can remember the same posts and maybe provide a link. Those look like a good deal to me and as I said I may try to get one myself. I understand. I may just get one and test it out. Worst case, I'm out 60ish bucks. Link to comment
PiDD Posted July 12, 2016 Share Posted July 12, 2016 I bought the Startech PEXSAT34RH card. I can ctlr-m during boot and see the hdds attached but when the server boots the hard drives do not show up? is there something I have to do? Link to comment
JorgeB Posted July 12, 2016 Share Posted July 12, 2016 I bought the Startech PEXSAT34RH card. I can ctlr-m during boot and see the hdds attached but when the server boots the hard drives do not show up? is there something I have to do? Possibly the Marvell Virtualization issue. Link to comment
digitalfixer Posted July 21, 2016 Share Posted July 21, 2016 I'm thinking about getting one of these just to add a couple of extra 6Gb ports. https://www.scan.co.uk/products/silverstone-pci-express-card-2x-sata-6-gbps-ports-supports-raid-0-raid-1-span-and-non-raid-function It says it has this controller ASMedia 1062R. Just wondering if the drivers are already in the kernel or if its even supported. Kevin. Link to comment
Fireball3 Posted July 21, 2016 Share Posted July 21, 2016 There is a card in the listed in the wiki with a similar chipset. Chances are good. Link to comment
opentoe Posted July 23, 2016 Share Posted July 23, 2016 Ah ok so then they become the same card? I was confused since there is a price difference between the two. Also was wondering if the H310 ran as hot as the LSI? Yes and yes. These controllers need some airflow near them, or they run very hot, a standard 80mm or 120mm fan blowing some air on the heatsink is enough. Or stick a $.25 larger heatsink on the chip. And yes, I did this little change. Got the closet size heatsink I could find with long ass finns on them, used very good thermal paste and never any heat problems. But the server sits in a climate controlled area. Link to comment
opentoe Posted July 23, 2016 Share Posted July 23, 2016 Would there be any reason not to buy this card? LSI-SAS-9210-8i No reason at all. REMEMBER the card will comes in RAID mode and you'll need to flash the firmware of the card to turn it into a JBOD card. Just a plain pass thru. I bought the Dell H310 cards myself because the connectors are at the rear of the card instead of the middle. I have been very pleased. I also would buy the ones from China. Some of have been knock-offs. Link to comment
Fireball3 Posted August 8, 2016 Share Posted August 8, 2016 Opentoe, do you mind sharing some pics of your heatsink mods? Link to comment
huntjules Posted August 11, 2016 Share Posted August 11, 2016 StarTech PCI-E 2 port SATA 6Gbps works great with no configuration needed, i.e plug & play Part numbers: PEXSAT32 & PEXESAT3221 Link to comment
TapRackPull Posted September 14, 2016 Share Posted September 14, 2016 I installed a AOC-SAS2LP-MV8 over the weekend. Completely plug-n-play with 6.1.9. I actually added 4 2TB HDD in one commercial break of football action. I was amazed. Link to comment
opentoe Posted September 16, 2016 Share Posted September 16, 2016 Opentoe, do you mind sharing some pics of your heatsink mods? I don't think I made any mods to any controller card heatsinks. At least I don't remember. I'd love to give them out, but can't remember ever doing any. Give me a hint of what they looked like and I'll search for them. Link to comment
Fireball3 Posted September 16, 2016 Share Posted September 16, 2016 Or stick a $.25 larger heatsink on the chip. And yes, I did this little change. Got the closet size heatsink I could find with long ass finns on them, used very good thermal paste and never any heat problems. But the server sits in a climate controlled area. Maybe I don't get the right meaning out of your post? Link to comment
Zeus Posted September 17, 2016 Share Posted September 17, 2016 Found this cool mod https://forums.freenas.org/index.php?threads/basic-ibm-serveraid-m1015-question.35510/ Link to comment
ZexisStryfe Posted September 19, 2016 Share Posted September 19, 2016 Has anybody gotten the Avagotech (LSI) SAS-9305-24i to work with unRAID? I have installed it, but unRAID doesn't seem to see the device. Open to suggestions on getting it working... http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i Link to comment
JorgeB Posted September 19, 2016 Share Posted September 19, 2016 Has anybody gotten the Avagotech (LSI) SAS-9305-24i to work with unRAID? I have installed it, but unRAID doesn't seem to see the device. Open to suggestions on getting it working... http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i If you go to Tools -> System Devices do you see it there? Link to comment
ZexisStryfe Posted September 19, 2016 Share Posted September 19, 2016 I see this guy but that is it- 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01) Link to comment
JorgeB Posted September 19, 2016 Share Posted September 19, 2016 I see this guy but that is it- 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01) I suspect you need a newer linux kernel for mpt3sas to include your controller, you can ask LT to add it to next unRAID release. Link to comment
kolla Posted October 30, 2016 Share Posted October 30, 2016 Looks like I'll be needing to expand my storage pretty soon and reading through these threads the Dell H310 controller card is a popular choice among unraiders these days. Looking at ebay listings I came up with the following .. can someone please confirm that this is the exact card we're talking about?? Just want to make sure before I buy ... http://www.ebay.com/itm/Dell-PE-PERC-H310-6Gb-s-RAID-Controller-Card-0HV52W-Standard-Profile/291925551355 Do I also need to buy any special cables? Links to product? My motherboard is https://www.msi.com/Motherboard/880GMAE53.html Will this card work with my MB? Will this card support 5T+ drives? Appreciate the feedback. For reference I'm running latest UnRAID version. Link to comment
Fireball3 Posted November 3, 2016 Share Posted November 3, 2016 Yes, that is the card you can take. It supports drive sizes >2.2TB. You need forward breakout cables SFF-8087 MiniSAS to S-ATA. Reverse breakout will not work! Maybe you can find an offer that includes the standard cables as well? One cable has only 2 S-ATA connectors per port though, but it could be enough to start with. Can't say much about the compatibility with your board. There are solutions to the known hiccups. Can't remember of an abandoned project because of incompatibility reasons. Please take your time to study the wiki and then come back with your questions. Link to comment
kolla Posted November 5, 2016 Share Posted November 5, 2016 Thanks for the details Fireball3. I found and ordered one with a cable you mentioned. I'll have to read up on the flashing instructions now.. hopefully not hard. Link to comment
leg0 Posted November 7, 2016 Share Posted November 7, 2016 Hi guys, I need help looking for a 12 port PCIE controller. Any recommendations? Link to comment
Fireball3 Posted November 7, 2016 Share Posted November 7, 2016 Unfortunately not many entries in the hardware wiki. Check the links in the line above the table, maybe there is something you can use? Economically I would guess you are better off with two 8-port controller... Link to comment
ken-ji Posted November 7, 2016 Share Posted November 7, 2016 I guess I should ask to have my SAS/SATA card added as a data point: LSI-9206-16e this is a PCI3.0 x8 lane card with 4x external SFF8644 connectors allowing for connection to 16x direct attached drives or 1024 multiple expander attached drives. As for the external enclosure, I'm currently using this with a ARECA ARC-4036 8 drive enclosure with built-in expander. I'm using all this with a ITX motherboard and case, thus minimizing the the issues with PSU needing to support high power ratings or any rail issues. Link to comment
Fireball3 Posted November 7, 2016 Share Posted November 7, 2016 A nice card, but ~650€ ... Link to comment
Recommended Posts