ReverbSlush Posted May 24, 2022 Share Posted May 24, 2022 Had this issue on 6.10.0 R710 Following @Zeroeth 's instructions to add intel_iommu=on iommu=pt fixed it and now it's booting up again. THANK YOU!!! Quote Link to comment
MDHMatt Posted May 25, 2022 Share Posted May 25, 2022 I too can confirm that this fixed my issue when updating from 6.9 to .10 mellanox give an explanation on what they do. If anything it’s a performance boost Quote Link to comment
blaine07 Posted May 27, 2022 Share Posted May 27, 2022 We have all been turning iommu on here. how are we all affected by the 6.10.2 upgrade released today? It mentions intel IOMMU stuff? I don’t understand if we need to worry or not? THIS Quote Link to comment
jared2876 Posted May 29, 2022 Share Posted May 29, 2022 I too am having this issue on my dell R710. I updated to 6.10.2 to see if there was a fix and now i get a bzfirmware checksum error. I just ended up going back to 6.9.2 until there is a solution to this. Unless someone has a fix for this i would not recommend updating to 6.10.2 Quote Link to comment
JorgeB Posted May 29, 2022 Share Posted May 29, 2022 2 minutes ago, jared2876 said: and now i get a bzfirmware checksum error. And this posted above doesn't work for you? https://forums.unraid.net/topic/119502-bzimage-checksum-error/?do=findComment&comment=1108354 Quote Link to comment
spalmisano Posted May 29, 2022 Author Share Posted May 29, 2022 Just now, jared2876 said: I too am having this issue on my dell R710. I updated to 6.10.2 to see if there was a fix and now i get a bzfirmware checksum error. I just ended up going back to 6.9.2 until there is a solution to this. Unless someone has a fix for this i would not recommend updating to 6.10.2 Did the boot arguments not work for you? I’m able to boot on both an R710 and R720 for the 6.10.x versions after adding them. Quote Link to comment
Leaf Fan Posted May 30, 2022 Share Posted May 30, 2022 (edited) On 5/29/2022 at 8:31 AM, spalmisano said: Did the boot arguments not work for you? I’m able to boot on both an R710 and R720 for the 6.10.x versions after adding them. On my Dell R710 I too added the ARG and it will not boot. Still get the checksum error. It took 3 reboots to finally work. Edited May 30, 2022 by Leaf Fan Quote Link to comment
CodingCody Posted June 2, 2022 Share Posted June 2, 2022 On 5/30/2022 at 5:06 PM, Leaf Fan said: On my Dell R710 I too added the ARG and it will not boot. Still get the checksum error. It took 3 reboots to finally work. I have the same issue just with a R410. I've tried rebooting a few times and it doesn't want to start. Quote Link to comment
Mcarpent10 Posted June 3, 2022 Share Posted June 3, 2022 I am having a similar issue with my Dell R610 upgraded to latest and now getting checksum error with the append inserted. Any advice would be greatly appreciated. Quote Link to comment
Squid Posted June 3, 2022 Share Posted June 3, 2022 You can always try manually updating - maybe its a legit issue. Download the zip file from https://unraid.net/download, overwrite all of the bz* files (and the changes.txt file) on the flash drive with those in the zip. Reboot and try again. Quote Link to comment
Mcarpent10 Posted June 4, 2022 Share Posted June 4, 2022 18 hours ago, Squid said: You can always try manually updating - maybe its a legit issue. Download the zip file from https://unraid.net/download, overwrite all of the bz* files (and the changes.txt file) on the flash drive with those in the zip. Reboot and try again. This was the only method that worked for me. Thank you! Quote Link to comment
jared2876 Posted June 5, 2022 Share Posted June 5, 2022 On 5/29/2022 at 8:31 AM, JorgeB said: And this posted above doesn't work for you? https://forums.unraid.net/topic/119502-bzimage-checksum-error/?do=findComment&comment=1108354 For me this did not work at all. Even disabling virtualization just to get UNRAID to boot did not work. Quote Link to comment
Smooth Beaver Posted June 11, 2022 Share Posted June 11, 2022 How do I get this intel_iommu=on iommu=pt to remain remain on boot? I run a headless unit and every reboot I have to drag the monitor out and boot with those options. @Squid overwritting the bz files on the USB did not help for me. Only using those options on boot allow UnRaid to boot. Is downgrading to 6.9 as simple as overwritting the bz files with the 6.9 versions? Quote Link to comment
trurl Posted June 11, 2022 Share Posted June 11, 2022 3 minutes ago, Smooth Beaver said: How do I get this intel_iommu=on iommu=pt to remain remain on boot? Edit the boot menu at Main - Boot Device - Flash - Syslinux Configuration Quote Link to comment
SimonF Posted June 11, 2022 Share Posted June 11, 2022 3 minutes ago, Smooth Beaver said: How do I get this intel_iommu=on iommu=pt to remain remain on boot? I run a headless unit and every reboot I have to drag the monitor out and boot with those options. @Squid overwritting the bz files on the USB did not help for me. Only using those options on boot allow UnRaid to boot. Is downgrading to 6.9 as simple as overwritting the bz files with the 6.9 versions? Goto main click on flash drive and in the syslinux settings add to end of the append line for your boot option. or install 6.10.3rc1 as it is the default. Quote Link to comment
JorgeB Posted June 12, 2022 Share Posted June 12, 2022 10 hours ago, Smooth Beaver said: How do I get this intel_iommu=on iommu=pt to remain remain on boot? You should update to v6.10.3-rc1, iommu=pt is the default, re-enable VT-d in the BIOS if disabled. Quote Link to comment
Geck0 Posted July 31, 2022 Share Posted July 31, 2022 I'm on Version 6.10.3 2022-06-14. My start up syslinux.cfg: Quote label Unraid OS menu default kernel /bzimage append pcie_no_flr=1022:1487 initrd=/bzroot video=efifb:off acpi_enforce_resources=lax pcie_acs_override=downstream I don't have the recommended settings, although what brought me here was the same error message as the OP. Quote intel_iommu=on iommu=pt Eventually, what worked was this: Quote On 6/4/2022 at 2:53 AM, Squid said: You can always try manually updating - maybe its a legit issue. Download the zip file from https://unraid.net/download, overwrite all of the bz* files (and the changes.txt file) on the flash drive with those in the zip. Reboot and try again. This was the only method that worked for me. Thank you! Its not clear if the recommended settings should be added to my boot profile? I'm using a 5950x processor. Quote Link to comment
heffe2001 Posted September 2, 2022 Share Posted September 2, 2022 Just wanted to add that this doesn't just apply to Dell servers, I've been having issues booting my flash on my HP DL380p Gen8 machine for months, to the point I changed out all my usb keys, and have to do all updates by hand (and attempt to boot them a dozen times or more till it just happens to work). Added the lines above to my syslinux.cfg file, and it boots every time. As long as updates don't rewrite the syslinux.cfg, it should survive updates now too (haven't been able to do an automatic update since the 6.10.x series started in RC...). Quote Link to comment
JorgeB Posted September 2, 2022 Share Posted September 2, 2022 21 minutes ago, heffe2001 said: Added the lines above to my syslinux.cfg file Lines above won't so anything since v6.10.3, it's already the default. Quote Link to comment
heffe2001 Posted September 2, 2022 Share Posted September 2, 2022 It ended up failing again after 3 reboots. Those lines aren't in my syslinux.cfg. It's definitely not my usb keys (I've tried many, and even bought new Samsung brand keys). Quote Link to comment
JorgeB Posted September 3, 2022 Share Posted September 3, 2022 11 hours ago, heffe2001 said: Those lines aren't in my syslinux.cfg. They don't need to be starting with v6.10.3, like mentioned it's the Unraid default now. Quote Link to comment
bombz Posted January 7, 2023 Share Posted January 7, 2023 Hello, Reporting to this thread regarding this concern as well UnRAID 6.11.1 Today I was going through my plugin check and (2X) plugins were not updating, they would sit in a 'pending' state Unassigned devices Unassigned devices Preclear I did check the logs before the reboot regarding this so my next course of action was to reboot (I would post the logs of the above plugin errors, however logs are not written to the flash and only to the RAM disk so I can't) going to look into how to possibly resolve that concern if there is a way to capture logs. Upon reboot I did receive a checksum error bzroot-gui - checksum error .... PRESS ANY KEY TO REBOOT I turned off the system and inserted my USB flash into my local desktop Downloaded > unRAIDServer-6.11.1-x86_64.zip Copied > bzroot-gui & bzroot-gui.sha256 (from the above zip to the flash drive) Safely removed the flash disk Inserted the flash disk back into my UnRAID server Booted with success Plugins updated with success Posting feedback in case anyone else has these concerns. Thank you, Quote Link to comment
Squid Posted January 7, 2023 Share Posted January 7, 2023 8 minutes ago, bombz said: UnRAID 6.11.1 Today I was going through my plugin check and (2X) plugins were not updating, they would sit in a 'pending' state Unassigned devices Unassigned devices Preclear You should upgrade to 6.11.5 Quote Link to comment
bombz Posted January 7, 2023 Share Posted January 7, 2023 1 hour ago, Squid said: You should upgrade to 6.11.5 I was pondering that. was going to wait until everything got buttoned up, regarding some of the feedback on I am still running V2 for now. I will push up to the latest soon. I appreciate that recommendation. Thank you. Quote Link to comment
Benemortasia Posted January 24, 2023 Share Posted January 24, 2023 (edited) I updated unraid 6.9.2 to 6.11.5 and got the same error. The server did not start after the update and gave me a superblock error. I couldnt get into the server remotely anymore. The device that gave me the error unraid /dev/loop0 /boot/bzmodules error I had to remove the USB from the server and opened it on a laptop. The loop0 seemed to be the bzmodules. So I copied the content of my flash-drives previous folder over the files on the USB. Put the USB in the server, started. At boot the server download/written a file or 2. And then the server started as before. This fixed the error for me. Still cant update to 6.11.5 succesfully Edited January 24, 2023 by Benemortasia Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.