July 6, 20233 yr Udated to UNRAID OS VERSION 6.12.2 without any issues! My Unraid server is not too complicated but I run 5 docker containers, 4 VMs, and I also use it as a local file server. Thanks!! C
July 9, 20232 yr Hi, I experience a weird behavior that after the update, my server disappears from the network. Like in my router I can't find my server connected to the network. I hooked the server to a monitor and keyboard but I only get a black screen and have to hard shutdown the server to reboot it. Anyone experience this behavior? ts140-diagnostics-20230709-1435.zip
July 9, 20232 yr 6 hours ago, aetek5 said: Hi, I experience a weird behavior that after the update, my server disappears from the network. Like in my router I can't find my server connected to the network. I hooked the server to a monitor and keyboard but I only get a black screen and have to hard shutdown the server to reboot it. You should enable the syslog server (mirror to flash) and when it happens again create a new thread in General Support and include your diagnostics and the resulting syslog file saved in /logs on the flash drive. You might also want to look at your system event log in the BIOS, because this is exactly how systems with ECC are supposed to react if an uncorrectable memory error happens -> effectively shut down to prevent data corruption from propagating.
July 9, 20232 yr 21 minutes ago, Squid said: You should enable the syslog server (mirror to flash) and when it happens again create a new thread in General Support and include your diagnostics and the resulting syslog file saved in /logs on the flash drive. You might also want to look at your system event log in the BIOS, because this is exactly how systems with ECC are supposed to react if an uncorrectable memory error happens -> effectively shut down to prevent data corruption from propagating. Thank you for the advice. I enabled syslog server mirror to flash and will create the thread. I will look into the event log in the bios but it didn't shut down. Server was still running but not interactable. But maybe the bios will have more info. Thank you so much.
July 10, 20232 yr EDIT: Never mind. Found stuff that said a reboot is the only way. Well, once again, wouldn't shut down after sitting for an hour and couldn't kill any process to make it complete, so force a reboot and now will sit around and wait 30 hours for a parity check to finish. Then 6.12.2 is gone. I came from 6.9.2 but am going to try and down grade to 6.11.5. Well, 6.12.2 has been a total disaster. I can't reboot the server without it failing shutdown, even trying to stop any open processes, etc. So every reboot causes a parity check. Once I let it finish the check, I found the docker.img file corrupt. Got that fixed, and now I find the /mnt/user folder is "missing" or labeled as ?user in MC. When I look at ls-l for the user folder is shows as "d???????" and all other fields for the listing as "?". I can't install any new dockers now even though I was able to install all previous dockers to rebuild the docker.img file. I want to downgrade but this missing /mnt/user file has me concerned because now docker what start because of missing path. What can I do to get it back, just recreate the folder under /mnt or is there something else that needs to be done to fix it. Edited July 11, 20232 yr by jmbailey2000
July 11, 20232 yr 15 hours ago, jmbailey2000 said: EDIT: Never mind. Found stuff that said a reboot is the only way. Well, once again, wouldn't shut down after sitting for an hour and couldn't kill any process to make it complete, so force a reboot and now will sit around and wait 30 hours for a parity check to finish. Then 6.12.2 is gone. I came from 6.9.2 but am going to try and down grade to 6.11.5. Well, 6.12.2 has been a total disaster. I can't reboot the server without it failing shutdown, even trying to stop any open processes, etc. So every reboot causes a parity check. Once I let it finish the check, I found the docker.img file corrupt. Got that fixed, and now I find the /mnt/user folder is "missing" or labeled as ?user in MC. When I look at ls-l for the user folder is shows as "d???????" and all other fields for the listing as "?". I can't install any new dockers now even though I was able to install all previous dockers to rebuild the docker.img file. I want to downgrade but this missing /mnt/user file has me concerned because now docker what start because of missing path. What can I do to get it back, just recreate the folder under /mnt or is there something else that needs to be done to fix it. I had the same issue and also downgraded to a previous version. I had to "edit" each docker container, resave it (Delete one character and add it back to unlock save button) and the container worked again. Everything works fine after downgrading to 6.11.4. Also found 6.12.1 to be a nightmare.
July 11, 20232 yr I used macvlan for years with Unraid. Now it just crashes and make my system unstable (tried it out for a couple of hours, bad mistake. CKSUM errors on cache while downloading and writing to cache, problems with docker disk img). What changed? Ipvlan works fine but I can't see the individual containers and usage in the router with that. Edited July 11, 20232 yr by Niklas
July 14, 20232 yr Was able to upgrade without any issues from 6.11.5 I think it was before. Edited July 14, 20232 yr by PeteAsking
July 14, 20232 yr If anyone is having issues with the array not stopping, there is a quick fix in https://forums.unraid.net/topic/141479-6122-array-stop-stuck-on-retry-unmounting-disk-shares/#comment-1283203 Unraid 6.12.3-rc3 has the fix built in, if you'd like to test it:
July 18, 20232 yr I´ve got the Problem that the server won´t boot anymore after the update.. MSI Z590, 11700K. The Last line while booting sequenze befor the display blacks out and is bzfirmware checksum and than a Line that starts with i915 but its to fast i cant read the rest of the line. Has anyone a solution for that maybe just to boot in the gui to restore to 6.11.5 when everything worked perfectly?
July 18, 20232 yr 15 minutes ago, BastianBayer said: Line that starts with i915 Did you try this: https://docs.unraid.net/unraid-os/release-notes/6.12.0#crashes-related-to-i915-driver
July 18, 20232 yr HI Guys Having a nightmare i waited untill version 6.12.3 rolled ouit before updating. I stopped my VM's with VM manager and my Docker Continers manually took array offline. The used O/S updater everything went fine no errors reported or seen. On reboot no VM's no Containers showing what can i do to get them back ? bearcave-diagnostics-20230718-1653.zip Ignore added to general support Edited July 18, 20232 yr by OsoPolar
July 18, 20232 yr Does not (I think) explain your problem, but it looks like the Settings for the Parity Check Tuning plugin are a bit strange Could you go to the plugins settings under Settings->Scheduler, make a change and hit apply to write a new set. If you could then post diagnostics again I can check if they now look more like what I would expect.
July 18, 20232 yr 2 minutes ago, OsoPolar said: Here you go bearcave-diagnostics-20230718-1741.zip 114.52 kB · 0 downloads Thanks - the settings for the plugin now look sensible. I suspect the ones you had were a legacy from quite some time ago and you had not revisited the settings page to update them. the next thing to try and tidy is what is causing the invalid entry in the syslog of the form: Jul 18 17:16:11 Bearcave crond[1173]: failed parsing crontab for user root: 04*** /usr/local/emhttp/plugins/user.scripts/startCustom.php /boot/config/plugins/user.scripts/scripts/qBittorrent Mover/script > /dev/null 2>&1 To resolve this I would suggest you go into the console level and then post the output of running: cat /etc/cron.d/root and hopefully identify what has inserted the problem entries. i know this is not solving your current problem, but by getting these little things out of the way hopefully we have a cleaner syslog to help with diagnosing the main problem.
July 18, 20232 yr https://logs.notifiarr.com/?d8b6fdbdb5ed9a65#C6yg1537MFU5K4kCD176UXF9EypxygTjBcke2SDA42ot
July 18, 20232 yr 2 minutes ago, OsoPolar said: https://logs.notifiarr.com/?d8b6fdbdb5ed9a65#C6yg1537MFU5K4kCD176UXF9EypxygTjBcke2SDA42ot Ok - that shows the invalid entry seems to be a User Script called 'qBittorrent Mover'. The fields at the start of the entry are meant to be space separated but the spaces seem to be absent. Not sure if this is a custom schedule you created or not? To get back to you original problem I do not see any obvious reason for you having issues at the moment, but having tidied up these 2 issues it might be worth rebooting to give you a cleaner starting position.
July 18, 20232 yr HI confused what you mean this is the file I used Trash guide from here Edited July 18, 20232 yr by OsoPolar
July 18, 20232 yr I have rebooted and nothing has changed the script looks correct from looking at the guides again bearcave-diagnostics-20230718-1754.zip
July 18, 20232 yr If use restore will it put everything back to normal ? Edited July 18, 20232 yr by OsoPolar
July 18, 20232 yr 3 hours ago, OsoPolar said: HI confused what you mean this is the file I used Trash guide from here It is not the script that is the problem - it is the information about when it should be run.
July 19, 20232 yr OK Fixed that HI I have added every docker back as suggested but none of the apps open from the web gui All of them are blank pages see image Here is a log just from one app Radarr https://paste.centos.org/view/8d8aea0a
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.