limetech Posted December 1, 2015 Share Posted December 1, 2015 Download Clicking 'Check for Updates' on the Plugins page is the preferred way to upgrade. Another maintenance release. Highlights: - 'Blank' screen when adding or updating docker containers should now be fixed [thanks Eric!] - btrfs cache pool writes should be significantly faster now [thanks Eric!] - Some nifty features added to webGui [thanks bonienl!] Changes: Version 6.1.5 2015-11-30 ------------------------ - emhttp: fix action of 'Parity is already valid' to not initiate correcting parity check following 'New Config' - pcre: 8.38 (SSA:2015-328-01) - udev rule: set deadline scheduler for non-rotating disks - webGui: Remove external resources from progress pages; eliminates Docker add/update apparent "hangs" - webGui: integrate bergware changes: - Replace Windows Vista logo with Windows 7 logo - Disable ComputeAll button when no shares are available - Make "empty share message" the same for both disk and user shares - Add parity-check history functionality - Add disk log functionality - Enhanced SMART global and per disk settings 1 Quote Link to comment
scytherbladez Posted December 1, 2015 Share Posted December 1, 2015 Download - 'Blank' screen when adding or updating docker containers should not be fixed [thanks Eric!] Not sure Eric should get thanks for this Quote Link to comment
limetech Posted December 1, 2015 Author Share Posted December 1, 2015 Download - 'Blank' screen when adding or updating docker containers should not be fixed [thanks Eric!] Not sure Eric should get thanks for this heh, typo Quote Link to comment
interwebtech Posted December 1, 2015 Share Posted December 1, 2015 Updated to 6.1.5 without incident. All green thumbs now across the dashboard (red error icon on Areca drives fixed). Will poke around and report any anomalies I might find. Quote Link to comment
StanC Posted December 1, 2015 Share Posted December 1, 2015 ... - 'Blank' screen when adding or updating docker containers should now be fixed [thanks Eric!] ... I just upgraded and can confirm that this is now fixed. At least for myself. The one docker that I was having issues with was EmbyServer, where the update screen was blank until after the update. Now it is working. My other two Plex and PlexPy would always display while they were getting updated. Thank you Eric! Quote Link to comment
Videodr0me Posted December 1, 2015 Share Posted December 1, 2015 Does this update also adress this bug when moving files/directories from cached shares to un-cached shares? http://lime-technology.com/forum/index.php?topic=44206.0 Quote Link to comment
garycase Posted December 1, 2015 Share Posted December 1, 2015 Never saw a reply to my question in 6.1.4, so if it was fixed there, I apologize for asking again ... but did either 6.1.4 or this update fix the "Trust Parity" option so a parity check isn't started when you start the array? There have been 3 instances I'm aware of (and likely others I'm not) where this has resulted in significant data loss. Quote Link to comment
limetech Posted December 1, 2015 Author Share Posted December 1, 2015 Never saw a reply to my question in 6.1.4, so if it was fixed there, I apologize for asking again ... but did either 6.1.4 or this update fix the "Trust Parity" option so a parity check isn't started when you start the array? There have been 3 instances I'm aware of (and likely others I'm not) where this has resulted in significant data loss. - emhttp: fix action of 'Parity is already valid' to not initiate correcting parity check following 'New Config' Quote Link to comment
garycase Posted December 1, 2015 Share Posted December 1, 2015 Never saw a reply to my question in 6.1.4, so if it was fixed there, I apologize for asking again ... but did either 6.1.4 or this update fix the "Trust Parity" option so a parity check isn't started when you start the array? There have been 3 instances I'm aware of (and likely others I'm not) where this has resulted in significant data loss. - emhttp: fix action of 'Parity is already valid' to not initiate correcting parity check following 'New Config' Excellent !! Not sure how I missed the first line of the change log [i'll blame it on a late night "very senior" moment ] Quote Link to comment
jinjorge Posted December 1, 2015 Share Posted December 1, 2015 updated with no issue. Parity check scheduled to run in about an hour. J Quote Link to comment
dave_m Posted December 1, 2015 Share Posted December 1, 2015 I found the updated Global SMART Settings section, but unchecking the 188 Command time-out box and then clicking Apply doesn't result in actually saving the new setting. When the page reloads the box is checked again. The per disk setting has the same behavior. Quote Link to comment
scottc Posted December 1, 2015 Share Posted December 1, 2015 I found the updated Global SMART Settings section, but unchecking the 188 Command time-out box and then clicking Apply doesn't result in actually saving the new setting. When the page reloads the box is checked again. The per disk setting has the same behavior. same thing here. settings are not getting saved in the Settings -> Disk Settings - Global SMART Settings section & individual disk - SMART Settings Quote Link to comment
bonienl Posted December 1, 2015 Share Posted December 1, 2015 I found the updated Global SMART Settings section, but unchecking the 188 Command time-out box and then clicking Apply doesn't result in actually saving the new setting. When the page reloads the box is checked again. The per disk setting has the same behavior. same thing here. settings are not getting saved in the Settings -> Disk Settings - Global SMART Settings section & individual disk - SMART Settings Yeah this is a bug, the Settings page has an incorrect reference to the file which saves the SMART settings (this is true for both global and per disk settings). Will submit a correction. As a temporary workaround you can rename these files, after you have made setting updates in the GUI: /boot/config/plugins/dynamix/smartALL.cfg to /boot/config/smart-all.cfg (these are the global settings) /boot/config/plugins/dynamix/smartONE.cfg to /boot/config/smart-one.cfg (these are the per disk settings) Quote Link to comment
jphipps Posted December 1, 2015 Share Posted December 1, 2015 I tried switching the per disk setting to turn off the command timeout, but even after copying the file, the UI still shows it checked, and it still shows up in the dashboard. Should the expected behavior from copying that file turn off the icon in the dash board and switch the UI for the setting? Quote Link to comment
bonienl Posted December 1, 2015 Share Posted December 1, 2015 I tried switching the per disk setting to turn off the command timeout, but even after copying the file, the UI still shows it checked, and it still shows up in the dashboard. Should the expected behavior from copying that file turn off the icon in the dash board and switch the UI for the setting? Yet another bug, the per disk settings file has a missing entry for the attributes and it requires editing of the file 'smart-one.cfg' itself. For example, these are the settings of the parity disk: [parity] [color=red]smEvents="5|187|188|197|198"[/color] smGlue="" smSelect="-1" smLevel="-1" smType="-1" smCustom="" The line in red needs to be added. Quote Link to comment
Frank1940 Posted December 1, 2015 Share Posted December 1, 2015 Yet another bug, the per disk settings file has a missing entry for the attributes and it requires editing of the file 'smart-one.cfg' itself. For example, these are the settings of the parity disk: It appears that both problems are in the GUI. Why not release a update to just the webGUI? (I think that requiring lots of people to edit a system file that can be so easily 'corrupted' with the user interface is simply unreasonable! And most of these folks will not even realize what has happened.) Quote Link to comment
bonienl Posted December 1, 2015 Share Posted December 1, 2015 Yet another bug, the per disk settings file has a missing entry for the attributes and it requires editing of the file 'smart-one.cfg' itself. For example, these are the settings of the parity disk: It appears that both problems are in the GUI. Why not release a update to just the webGUI? (I think that requiring lots of people to edit a system file that can be so easily 'corrupted' with the user interface is simply unreasonable! And most of these folks will not even realize what has happened.) It definitely is a GUI only thing. The corrections for these are put on github, but need help of LT to make them available as GUI only update. Quote Link to comment
NAS Posted December 1, 2015 Share Posted December 1, 2015 Successful upgrade using the online method here. No issues at all so far. Quote Link to comment
JorgeB Posted December 1, 2015 Share Posted December 1, 2015 Just noticed this, is it new? Don’t see anything in the notes so it’s probably from earlier release, but very welcome addition. Quote Link to comment
bonienl Posted December 1, 2015 Share Posted December 1, 2015 Just noticed this, is it new? Don’t see anything in the notes so it’s probably from earlier release, but very welcome addition. This was introduced in version 6.1.4 -- grouped under "Other improvements" Quote Link to comment
archedraft Posted December 1, 2015 Share Posted December 1, 2015 Upgrade went fine. Noticed a cosmetic *issue* under setting with the black theme. SMB icon has a white pixelated boarder. Quote Link to comment
bonienl Posted December 1, 2015 Share Posted December 1, 2015 Upgrade went fine. Noticed a cosmetic *issue* under setting with the black theme. SMB icon has a white pixelated boarder. Ahh, took a better one which works well in both white and black themes. Thx. Quote Link to comment
ufopinball Posted December 1, 2015 Share Posted December 1, 2015 I noticed that Supermicro's website is showing an updated driver for the SAS2LP controller for Linux: Version 4.0.0.1544. http://www.supermicro.com/products/accessories/addon/AOC-SAS2LP-MV8.cfm Doesn't look like it made it in the changes listed for unRAID 6.1.5, could this be considered a candidate for the next release? Thanks!! Quote Link to comment
ashman70 Posted December 1, 2015 Share Posted December 1, 2015 Not sure if this is a bug as I have never done it before, but I just upgraded and added a new disk along with a new four port SATA controller. I am currently pre clearing the new disk, however UnRaid indicates the array is started, yet the Docker tab is missing and if I go to shares it says the array has to be started? Thanks AM Quote Link to comment
dlandon Posted December 1, 2015 Share Posted December 1, 2015 Just completed the monthly parity check and there is no history. Is there some setting I need to make to get the history to work? EDIT: parity-checks.log: Dec 01 09:20:24|0|0|0 Dec 01 14:35:52|0|0|0 The first parity check I stopped before it was completed. The second completed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.