Whitelabel Posted June 7, 2021 Share Posted June 7, 2021 (edited) Hey guys, I have updated to the new version a few days ago and seems like ive been locked out of Web UI. So removed it and re-installed the docker assuming that ill be starting over again. But my computer (192.168.1.35) has been denied access. So i went into Krusader and looked at the SABNZBD.ini file and noticed that the host IP (0.0.0.0) and Port (8080) are different from my previous setup. So i switch to my previous server IP (192.168.1.30:8085) and restart SABNZBD. Im still getting denied access on my computer. Did i make the correct steps on fixing this? Or is there something else i should be looking at? Edit: For anyone that has the same problem like mine, user on reddit pointed me on the right direction. I had to modify the .ini file and put the IP range (192.168.1.0/24) under local_ranges to solve the issue. Edited June 9, 2021 by Whitelabel Specify local_ranges Quote Link to comment
Greyberry Posted June 27, 2021 Share Posted June 27, 2021 docker: Error response from daemon: pull access denied for binhex/sabnzbd, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. anybody else with this problem? Quote Link to comment
binhex Posted June 28, 2021 Author Share Posted June 28, 2021 On 6/27/2021 at 11:15 AM, Greyberry said: docker: Error response from daemon: pull access denied for binhex/sabnzbd, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. anybody else with this problem? no issues for me, pulled no problems from a clean state, check for dns related issues on unraid, reboot host if still no go. Quote Link to comment
mushtafa Posted July 3, 2021 Share Posted July 3, 2021 (edited) Need some help please. I'm unable to change the port numbers. I've installed this docker container this afternoon but it's trying to use port 8080 which is already in use with QBittorrent. I've attempted to change 8080 to 8081 & 8090 to 8091. I've changed it in the config screen, I've removed the values in the config screen and re-added them, I've changed them in the config file and the port mapping doesn't change. The log shows a fatal error as it can't bind port 8080 and I can't access the webui. If you want logs and/or screenshots, tell me what you need. Cheers EDIT: Think I've sussed it, possibly. I had changed the container port with the host port Edited July 3, 2021 by mushtafa Quote Link to comment
mushtafa Posted July 4, 2021 Share Posted July 4, 2021 (edited) EDIT: I removed and re-added the Host Port 1 field and it's working now. Not sure what happened. My issues return. I managed to get sab working, but sonarr and radarr couldn't see it as they are routed through privoxyvpn container. I routed sab through the same container and got it working, but even though I had changed the port to 8081 (and using it) it had also taken over 8080 which stopped qbittorrent from working and being accessable. I enabled "Host access to custom networks:" and changed the network type to bridge. When navigating to 192.168.1.50:8081 I get the "this page can't be reached" error in Chrome. Can anyone assist please? Edited July 4, 2021 by mushtafa Quote Link to comment
deltoran Posted August 29, 2021 Share Posted August 29, 2021 Hi there, I was wondering if someone could help me out here. The Default folder for the user folder looks like it is coming from the set /config directory Is this working as intended or how to I get it to pick up from /data instead Any help would be greatly appreciated Thanks Quote Link to comment
binhex Posted August 29, 2021 Author Share Posted August 29, 2021 Hi there, I was wondering if someone could help me out here. The Default folder for the user folder looks like it is coming from the set /config directory Is this working as intended or how to I get it to pick up from /data instead Any help would be greatly appreciated Thanks Simply change the default base folder to /data and you should be good, alternatively specify an absolute path example /data/incompleteSent from my CLT-L09 using Tapatalk 1 Quote Link to comment
pappaq Posted September 17, 2021 Share Posted September 17, 2021 Hello all, I have the following problem with my SABnzbd docker. Unfortunately, it no longer starts properly and the web frontend is no longer displayed to me. I just can't figure it out from the following logs. Can someone help me to find a clue? Hello all, I have the following problem with my SABnzbd docker. Unfortunately, it no longer starts properly and the web frontend is no longer displayed to me. I just can't figure it out from the following logs. Can someone help me to find a clue? Thank you in advance! Quote Link to comment
binhex Posted September 17, 2021 Author Share Posted September 17, 2021 Just now, pappaq said: Can someone help me to find a clue? you are in the wrong support thread, this is for sabnzbd not the vpn variant (left click docker icon and select 'support'), as for your issue, see Q17 here:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md please reply in the correct support thread. Quote Link to comment
pappaq Posted September 17, 2021 Share Posted September 17, 2021 4 minutes ago, binhex said: you are in the wrong support thread, this is for sabnzbd not the vpn variant (left click docker icon and select 'support'), as for your issue, see Q17 here:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md please reply in the correct support thread. Thanks for your quick reply! Quote Link to comment
optiman Posted September 17, 2021 Share Posted September 17, 2021 (edited) @binhex All of my dockers are no longer able to check for updates and when I chick on the button to Check, they all spin for a long time and then it times out. Something has changed. I can do a Force update and those work fine. Any idea why this is happening? error in syslog: Sep 17 07:48:54 Tower nginx: 2021/09/17 07:48:54 [error] 8396#8396: *911273 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 10.11.79.248, server: , request: "POST /plugins/dynamix.docker.manager/include/DockerUpdate.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "10.11.79.162", referrer: "http://10.11.79.162/Docker" Sep 17 07:48:54 Tower nginx: 2021/09/17 07:48:54 [error] 8396#8396: *911273 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 10.11.79.248, server: , request: "POST /plugins/dynamix.docker.manager/include/DockerUpdate.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "10.11.79.162", referrer: "http://10.11.79.162/Docker" Edited September 18, 2021 by optiman Quote Link to comment
ytddewqf Posted September 18, 2021 Share Posted September 18, 2021 (edited) Hi, Does anyone happen to know what "puremagic" is? Woke up this morning and checked my server however Sabnzbd stopped around 01:00hrs this morning. I haven't touched anything, the only thing I can think of is that there may have been an update but I'm not sure. Edited September 18, 2021 by BeardedNoir Quote Link to comment
binhex Posted September 18, 2021 Author Share Posted September 18, 2021 Hi, Does anyone happen to know what "puremagic" is? Woke up this morning and checked my server however Sabnzbd stopped around 01:00hrs this morning. I haven't touched anything, the only thing I can think of is that there may have been an update but I'm not sure. There were multiple upstream pushes last night which triggered the builds I would firstly ensure you are running the latest image by doing a check for updates and applying any pending if that does not work and please attach your supervisor log fileSent from my CLT-L09 using Tapatalk 1 Quote Link to comment
ytddewqf Posted September 18, 2021 Share Posted September 18, 2021 2 minutes ago, binhex said: There were multiple upstream pushes last night which triggered the builds I would firstly ensure you are running the latest image by doing a check for updates and applying any pending if that does not work and please attach your supervisor log file Sent from my CLT-L09 using Tapatalk Apologies, I should have checked for an update before posting my question. There is an update and it's fixed matters. Thanks for the very speedy response. 1 Quote Link to comment
gigafl0p Posted October 2, 2021 Share Posted October 2, 2021 I have a gigabit connection. With my TrueNAS box I max out at 108mb/s. With unRAID with 1 running binhex-Sabnzbd I max out at 45mb/s. When I install another instance of sabnzbd and run it simultaneously as instance 1 - both instances max out at 45mb/s (totalling 90mb/s). Any idea how to lift this limit on one instance? Quote Link to comment
ashman70 Posted October 9, 2021 Share Posted October 9, 2021 The las few days I've been getting this error message pop up in Sabnzb: The server replied with an unexpected error code (other than a refusal of a recipient). Is this an old problem that has returned or a new one? Is there a way to make it go away? Ive cleared my browsers cache, tried a different browser, I still get the error, I am on a Mac. Quote Link to comment
spamalam Posted October 25, 2021 Share Posted October 25, 2021 (edited) Hi, I'm wondering if someone can help. I'm being hit by incredibly slow unrar performance. I have some unrar actions that seem to be incredibly slow: root@beyonder-nas:/mnt/cache/downloads/sabnzbd/movies/completes# ps -ef | grep unrar nobody 12767 22961 0 10:35 ? 00:00:15 [unrar] <defunct> nobody 15296 22961 0 Oct24 ? 00:00:04 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/American.Horror.Story.S09E09.Final.Girl.1080p.AMZN.WEB-DL.DD+5.1.H.264-AJP69/e0es2oakQoWkawaae0DvzN48TV.part01.rar /completes/tv/completes/_UNPACK_American.Horror.Story.S09E09.Final.Girl.1080p.AMZN.WEB-DL.DD+5.1.H.264-AJP69/ nobody 19565 22961 0 Oct24 ? 00:00:02 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/The.Baby.of.Macon.1993.1080p.BluRay.x264-nikt0/75639703d605cb75783e2b0aec984fde.part01.rar /completes/movies/completes/_UNPACK_The.Baby.of.Macon.1993.1080p.BluRay.x264-nikt0/ root 21995 20089 0 12:23 pts/3 00:00:00 grep unrar nobody 23331 22961 0 10:57 ? 00:00:23 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/The.Box.2009.Bluray.1080p.DTSHR5.1.x264.dxva-FraMeSToR/OAK2VnG5cqOXOXpDst50mft31c.part001.rar /completes/movies/completes/_UNPACK_The.Box.2009.Bluray.1080p.DTSHR5.1.x264.dxva-FraMeSToR/ nobody 24707 22961 0 Oct24 ? 00:00:16 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/The.Seventh.Day.2021.1080p.Bluray.DTS-HD.MA.5.1.x264-EVO/401e446e9aaa2996da53d095d384931e.part01.rar /completes/movies/completes/_UNPACK_The.Seventh.Day.2021.1080p.Bluray.DTS-HD.MA.5.1.x264-EVO/ nobody 25939 22961 0 Oct24 ? 00:00:01 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/American.Horror.Story.S09E07.The.Lady.in.White.REPACK.1080p.AMZN.WEB-DL.DD+5.1.H.264-AJP69/dCnVqHk50rhBFDj6d6v6uSOn40cAU2f1AbJY.part01.rar /completes/tv/completes/_UNPACK_American.Horror.Story.S09E07.The.Lady.in.White.REPACK.1080p.AMZN.WEB-DL.DD+5.1.H.264-AJP69/ nobody 29901 22961 0 Oct24 ? 00:00:00 /usr/sbin/unrar x -vp -idp -scf -o+ -p- /downloads/American.Horror.Story.S09E06.PROPER.1080p.WEB.H264-METCON/2TCryetkVyUD4RCs97otDw.part01.rar /completes/tv/completes/_UNPACK_American.Horror.Story.S09E06.PROPER.1080p.WEB.H264-METCON/ root@beyonder-nas:/mnt/cache/downloads/sabnzbd/movies/completes# date Mon Oct 25 12:23:29 CEST 2021 Unrar has always been quite slow, but this seems to be taking the mickey a bit. I set off a colossal amount of downloads so everything is stuck direct unpacking, unraring and post-processing. It very slowly processes but based on those times, some of the unrar actions are over 12hrs? My setup is on two disks outside of the array, so caching shouldn't be playing into it. Both the download disk and the cache disk are Samsung SSD EVO. root@beyonder-nas:/mnt/cache/downloads/sabnzbd/movies/completes# df -h Filesystem Size Used Avail Use% Mounted on rootfs 32G 1.1G 31G 4% / devtmpfs 32G 0 32G 0% /dev tmpfs 32G 0 32G 0% /dev/shm cgroup_root 8.0M 0 8.0M 0% /sys/fs/cgroup tmpfs 128M 13M 116M 10% /var/log /dev/sda1 3.8G 1.1G 2.7G 28% /boot overlay 32G 1.1G 31G 4% /lib/modules overlay 32G 1.1G 31G 4% /lib/firmware /dev/sdb1 1.9T 794G 1.1T 43% /mnt/apps <-- SSD outside of array /dev/sdc1 1.9T 79G 1.8T 5% /mnt/plex /dev/md3 13T 13T 56G 100% /mnt/disk3 /dev/md4 11T 11T 19G 100% /mnt/disk4 /dev/md5 11T 4.9T 6.1T 45% /mnt/disk5 /dev/md6 13T 6.6T 6.2T 52% /mnt/disk6 /dev/md7 9.1T 9.1T 5.6G 100% /mnt/disk7 /dev/md8 11T 4.9T 6.1T 45% /mnt/disk8 /dev/md9 11T 4.9T 6.1T 45% /mnt/disk9 /dev/md10 7.3T 7.3T 13G 100% /mnt/disk10 /dev/md11 7.3T 7.3T 7.0G 100% /mnt/disk11 /dev/md12 9.1T 9.1T 14G 100% /mnt/disk12 /dev/md13 11T 4.9T 6.1T 45% /mnt/disk13 /dev/md14 7.3T 7.3T 44G 100% /mnt/disk14 /dev/md15 11T 4.9T 6.1T 45% /mnt/disk15 /dev/md16 11T 8.9T 2.1T 82% /mnt/disk16 /dev/sde1 1.9T 1.5T 393G 79% /mnt/cache <-- SSD cache disk, not a share. shfs 168T 108T 60T 65% /mnt/user0 shfs 168T 108T 60T 65% /mnt/user Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2021-10-17 21:19:49.997687 [info] Host is running unRAID 2021-10-17 21:19:50.037897 [info] System information Linux e4b9d99f5353 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux 2021-10-17 21:19:50.082427 [info] OS_ARCH defined as 'x86-64' 2021-10-17 21:19:50.126310 [info] PUID defined as '99' 2021-10-17 21:19:50.373103 [info] PGID defined as '100' 2021-10-17 21:19:50.493928 [info] UMASK defined as '000' 2021-10-17 21:19:50.536380 [info] Permissions already set for '/config' 2021-10-17 21:19:50.586917 [info] Deleting files in /tmp (non recursive)... 2021-10-17 21:19:53.008359 [info] Starting Supervisor... 2021-10-17 21:19:53,482 INFO Included extra file "/etc/supervisor/conf.d/sabnzbd.conf" during parsing 2021-10-17 21:19:53,482 INFO Set uid to user 0 succeeded 2021-10-17 21:19:53,490 INFO supervisord started with pid 7 2021-10-17 21:19:54,493 INFO spawned: 'sabnzbd' with pid 65 2021-10-17 21:19:54,495 INFO spawned: 'shutdown-script' with pid 66 2021-10-17 21:19:54,495 INFO reaped unknown pid 8 (exit status 0) 2021-10-17 21:19:55,497 INFO success: sabnzbd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2021-10-17 21:19:55,497 INFO success: shutdown-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2021-10-19 12:52:31,465 DEBG 'sabnzbd' stderr output: 2021-10-19 12:52:31,463::WARNING::[nzbstuff:919] Unwanted Extension in file RARBG_DO_NOT_MIRROR.exe (Fear.the.Walking.Dead.S07E02.1080p.WEB.H264-GGWP[rarbg]-xpost) 2021-10-23 11:44:16,899 DEBG 'sabnzbd' stderr output: 2021-10-23 11:44:16,899::WARNING::[nzbstuff:919] Unwanted Extension in file RARBG_DO_NOT_MIRROR.exe (The.Walking.Dead.World.Beyond.S02E01.Konsekans.REPACK.1080p.AMZN.WEBRip.DDP5.1.x264-NTb[rarbg]-xpost) 2021-10-24 20:19:23,481 DEBG 'sabnzbd' stderr output: 2021-10-24 20:19:23,432::WARNING::[nzbstuff:908] Pausing duplicate NZB "Rurouni.Kenshin.The.Final.2021.1080p.BluRay.REMUX.AVC.TrueHD.7.1-TayTO.nzb" 2021-10-25 10:31:40,551 DEBG 'sabnzbd' stderr output: 2021-10-25 10:31:40,545::WARNING::[nzbstuff:908] Pausing duplicate NZB "Zone.414.2021.1080p.AMZN.WEBRip.DDP5.1.x264-AR.nzb" 2021-10-25 10:38:29,836 DEBG 'sabnzbd' stderr output: 2021-10-25 10:38:29,834::WARNING::[nzbstuff:908] Pausing duplicate NZB "Cruising.1980.1080p.BluRay.X264-AMIABLE.nzb" System doesn't appear to be doing much, occasionally there's a single core cpu processing. Attaching some screens on the setup incase there's some flag. The download and complete folders are on different disks, but both are SSD and my understanding is that since its an unrar it will be just as efficient, if not more so going across disks (i.e. read from one, write to another). Edited October 25, 2021 by spamalam Adding disk speed for source for unrar. Quote Link to comment
Herman Terds Posted December 12, 2021 Share Posted December 12, 2021 (edited) Does anybody know why suddenly Sab is getting these "API missing" errors? (see img below) All of my various *darr tools and NZBhydra2 are working great and have the correct API, including the SABconnect chrome extension. Haven't changed anything that I know of. And I'm not a networking expert (or an Unraid expert) but I believe 172.17.0.1 is the main network interface set up by Unraid, correct? Does that mean some diagnostic tool in Unraid is trying to access Sab or something outside of Unraid? I have heard that security apps will sometimes scan web apps like Sab and cause this error. I know I can turn off this warning but I'd love to figure out what is going on. Note that the screenshot below was taken immediately after rebooting Unraid. I seem to get one or two of these every single day at 9:00 am. Edited December 12, 2021 by Herman Terds Quote Link to comment
jeff.lebowski Posted December 16, 2021 Share Posted December 16, 2021 On 5/30/2021 at 4:08 PM, jeff.lebowski said: This error popped up for me a few weeks ago. It repeated a few times, and a container restart fixed it each time. Well, a container restart isn't working today. What other info is needed to start troubleshooting? sabnzbd (1).log 2.68 MB · 0 downloads Happened again twice today. Created the missing folders. I guess that's a solution. Quote Link to comment
Aemon Posted December 17, 2021 Share Posted December 17, 2021 Has anyone had this error message when connecting to their usenet provider before? Searched and Searched and cannot find an answer [Errno 111] [SSL: SSLV3_ALERT_HANDSHAKE_FAILURE] sslv3 alert handshake failure (_ssl.c:997) Quote Link to comment
FattyDave18 Posted March 9, 2022 Share Posted March 9, 2022 Hello, hoping someone can help me. I've started to receive the below error when sab tries to run the sabToSickBeard.py script. /usr/bin/env: ‘python2’: No such file or directory I'm not sure what changed to cause this, although I did recently update Unraid to 6.9.2 and therefore Sab (but not certain the timeframe matches). I found a previous post in this thread with a similar problem. This appears to be resolved by a further release of Sab though which being 3 years ago I must have. I got a bit lost in the troubleshooting steps in that previous discussion re using ssh to connect to the docker. It's all worked flawlessly for a couple of years since I set it up so keen to get it back to it's automated glory. Many Thanks! Quote Link to comment
binhex Posted March 9, 2022 Author Share Posted March 9, 2022 4 minutes ago, FattyDave18 said: Hello, hoping someone can help me. I've started to receive the below error when sab tries to run the sabToSickBeard.py script. /usr/bin/env: ‘python2’: No such file or directory I'm not sure what changed to cause this, although I did recently update Unraid to 6.9.2 and therefore Sab (but not certain the timeframe matches). I found a previous post in this thread with a similar problem. This appears to be resolved by a further release of Sab though which being 3 years ago I must have. I got a bit lost in the troubleshooting steps in that previous discussion re using ssh to connect to the docker. It's all worked flawlessly for a couple of years since I set it up so keen to get it back to it's automated glory. Many Thanks! python v2 is no longer supported and has been removed, you need to get a python v3 compatible version of that script. Quote Link to comment
musicking Posted March 10, 2022 Share Posted March 10, 2022 Anyone have success getting the nzb-notify script to work? I see that SABNZBD is removing pushover support along with others in favor of nzb-notify. I get error "Notification script returned exit code 1 and output "Traceback (most recent call last): File "/config/scripts/nzb-notify/Notify.py", line 174, in <module> from nzbget import SCRIPT_MODE ModuleNotFoundError: No module named 'nzbget' "" I can console into the docker and run the script without issues Quote Link to comment
keenkreations Posted March 11, 2022 Share Posted March 11, 2022 On 3/10/2022 at 10:16 AM, musicking said: Anyone have success getting the nzb-notify script to work? I see that SABNZBD is removing pushover support along with others in favor of nzb-notify. I get error "Notification script returned exit code 1 and output "Traceback (most recent call last): File "/config/scripts/nzb-notify/Notify.py", line 174, in <module> from nzbget import SCRIPT_MODE ModuleNotFoundError: No module named 'nzbget' "" I can console into the docker and run the script without issues Did you get the latest NZB-notify scripts listed on the bottom of this page? https://sabnzbd.org/wiki/configuration/3.5/notifications#nscript And did you chmod +x the Notify.py and Sabnzbd-notify.py in Terminal/Midnight Commander? (I did that also in my installation) See if you can pull up the Docker logs to see what the full error is...I also had to do that to make sure everything was working properly. Quote Link to comment
musicking Posted March 11, 2022 Share Posted March 11, 2022 I followed those instructions and still get errors when executing via SAB. Docker logs show that exact error I listed above. Seems like requirements are missing, but I ran the pip install -r requirements.txt command without fail. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.