7 hours ago, dopeytree said:

Could not check for blacklisted plugins

Running unraid 6.12.11

 

Looks like it's back!    Must be a typo or similar issue in the plugin again, as it shows up regardless of Unraid version on each of my systems (4x 7.0 beta 2 here)

Edited September 5, 20241 yr by Espressomatic

I'm seeing the same issue as @Espressomatic .

"Could not check for blacklisted plugins."

unraid Version 6.12.13 2024-08-22

i cant even get past the "now scanning your system" pop-up. the percentage never shows and its just stuck at that pop-up. 

And i also had the "could not check for blacklisted plugin" yesterday.

On 8/25/2024 at 8:36 AM, Squid said:

I think this is because of the new method of update checking / installing.  Will investigate further.

On 6.12.11 I'm seeing it correctly detect 6.12.13 as the next stable branch update. But if I select the next branch it tests for 6.12.10. 

Hi, I'm getting the following error on FCP and can't find the cause myself (I don't have NerdPack installed)

 

/var/log is getting full (currently 54 % used)

 

I've included my diagnostics below. Any help to remove this error would be appreciated. Thanks

unraid-diagnostics-20240908-0900.zip

3 minutes ago, rama3124 said:

Hi, I'm getting the following error on FCP and can't find the cause myself (I don't have NerdPack installed)

 

/var/log is getting full (currently 54 % used)

 

I've included my diagnostics below. Any help to remove this error would be appreciated. Thanks

unraid-diagnostics-20240908-0900.zip 293.28 kB · 0 downloads

 

On 8/24/2024 at 6:36 PM, Squid said:

I think this is because of the new method of update checking / installing.  Will investigate further.

Hello, 
Checking in if there has been any updates/progress with the plugin?

Thanks.

8 minutes ago, bombz said:

Hello, 
Checking in if there has been any updates/progress with the plugin?

Thanks.

Forgot all about it TBH

Seeing a few errors in FCP. Also noting instability in my GUI. It's probably related but not sure exactly what may be going on. Perhaps someone may have some thoughts.

 

1. Seeing undefined  notification popups

FCP Errors

 

1. Rootfs file is getting full (currently 100 % used)Possibly an application is storing excessive amount of data in /tmp. Seek assistance on the forums

 

2. Invalid folder none contained within /mntGenerally speaking, most times when other folders get created within /mnt it is a result of an improperly configured application. This error may or may not cause issues for you 

 

nasvm-diagnostics-20240909-1009.zip

Request:

Is it possible to get a page-fold feature added to hide ignored issues?  2/3 of the entire rendered page is ignored issues.

 

Issues:

The Plex slave shares issue is duplicated - two identical entries. I have 3 shares done like this in the Plex docker config. I'd expect the issue to show 3 entries, but only 1 ideally since they're all the same.

 

The second NIC is bonded to the first and in fail-over mode on one system. On a second system the second NIC is disabled/shut-down and not on the network.

 

Monitoring and re-scan made the NIC items disappear - they were left-overs from initial setup.

 

Oddity:

Also odd that everything except "multiple nics" is always repeated twice in two sections. The repeated nics comes up as expected, only shown in the bottom "all ignored"

 

 

Edited September 9, 20241 yr by Espressomatic

Hi,

I got this Error Message and can´t find out myself, what is wrong:

Quote

 

Invalid folder cache contained within /mnt Generally speaking, most times when other folders get created within /mnt it is a result of an improperly configured application. This error may or may not cause issues for you  More Information

 

root@KobelkaUnraid:~# ls -la /mnt
total 0
drwxr-xr-x 12 root   root  240 Sep 11 09:01 ./
drwxr-xr-x 22 root   root  480 Sep 11 09:19 ../
drwxrwxrwt  2 nobody users  40 Sep 11 09:00 addons/
drwxrwxrwx  6 nobody users  64 Sep 11 09:13 bigcache/
drwxr-xr-x  2 root   root   60 Sep 11 09:01 cache/
drwxrwxrwx  3 nobody users  21 Sep 11 09:13 camcache/
drwxrwxrwx  6 nobody users 101 Sep 11 09:13 disk1/
drwxrwxrwt  2 nobody users  40 Sep 11 09:00 disks/
drwxrwxrwt  2 nobody users  40 Sep 11 09:00 remotes/
drwxrwxrwt  2 nobody users  40 Sep 11 09:00 rootshare/
drwxrwxrwx  1 nobody users 101 Sep 11 09:13 user/
drwxrwxrwx  1 nobody users 101 Sep 11 09:13 user0/
root@KobelkaUnraid:~# 

 

Thanks for Help!

kobelkaunraid-diagnostics-20240911-0918.zip

If anyone receives an unknown plugin installed (specifically with regards to TailScale) there’s an update for FCP to handle this.   Additionally there is also an update for TailScale available

How about getting rid of the macvlan warnings?

Edited October 3, 20241 yr by Espressomatic

Can anyone see the Changelog of the new Update?

What does the plugin base Docker image file is getting full on when using a docker directory? My docker image was getting full but I switched to a directory months ago. I deleted the old image files, and have rebooted the system, but I'm still getting this error. Afaik I have no docker image, so I don't know how to make this error go away.

 

I can ignore it, but I'd rather not.

 

thanks!

7 minutes ago, nerv said:

but I'm still getting this error.

Have you used a Cache Drive for the Docker Directory? Maybe this is full.

 

The Message is a little bit confusing. True.

Could you please add a global setting to disable docker containers update warnings? Is quite annoying for those using docker compose with many containers.

 

On 10/5/2024 at 4:35 AM, Revan335 said:

Have you used a Cache Drive for the Docker Directory? Maybe this is full.

 

The Message is a little bit confusing. True.

 

No, the share is set to store on the Array.

 

16 hours ago, nerv said:

No, the share is set to store on the Array.

Can you posted a Screenshot?

On 10/4/2024 at 6:29 PM, Revan335 said:

Can anyone see the Changelog of the new Update?

I can't see the changes for the 02/10/2024 update in the changelog either.

Edited October 8, 20241 yr by Opawesome

On 10/8/2024 at 5:10 AM, Revan335 said:

Can you posted a Screenshot?

4 hours ago, nerv said:

Do you have a Cache or Array only System/Server?

 

What's says the Disks?

Can you posted a Screenshot from the Main Tab and the Shares Tab so we can see the Used/Free Space on this and what's Disks was used for the system Share.

Invalid folder error.  Please help me fix.

 

Invalid folder ncdata contained within /mnt
Generally speaking, most times when other folders get created within /mnt it is a result of an improperly configured application. This error may or may not cause issues for you  More Information

 

The folder shows empty and is owned by root.  I don't have anything mapped to it.. But I think I tried deleting it before and it broke my nextcloud aio.

zeus-diagnostics-20241011-1111.zip

On 10/9/2024 at 3:29 PM, Revan335 said:

Do you have a Cache or Array only System/Server?

 

What's says the Disks?

Can you posted a Screenshot from the Main Tab and the Shares Tab so we can see the Used/Free Space on this and what's Disks was used for the system Share.

5 hours ago, nerv said:

Why you used this Constellation?

You have not the Speed Improvement from the Cache when you used the Array.

And maybe Problems with spreaded Files on Cache/Array.

Used you Exclusive Share?

 

The Problem is the filled disks who maybe Parts of the system Share are located. Maybe test it with more free space on the disks and show the message from docker image persist.

 

Interesting that btrfs/RAID can used with different drives and spaces.

 

Why you are not using ZFS?