AmokK Posted December 10, 2022 Share Posted December 10, 2022 (edited) Hi ! I have a big file in the root folder of duplicati, about 7 Gb, what is it ? Is it safe to delete ? https://ibb.co/myqRjFs Edited December 10, 2022 by AmokK img missing Quote Link to comment
DaveDoesStuff Posted January 22, 2023 Share Posted January 22, 2023 On 9/12/2022 at 3:44 PM, monarc said: any chance the fix for the oauth2 issue with Jottacloud will be implemented in the beta release shortly? Any update on this? 😅 Quote Link to comment
Zappmax Posted April 11, 2023 Share Posted April 11, 2023 Hi, i have several (a lot of) files with 1.5GB they are on my cache drive and they taking more than 300G of my 500G cache. Has someone any idea whats going wrong here ? Thanks. Quote Link to comment
deusxanime Posted April 24, 2023 Share Posted April 24, 2023 (edited) Updated this last night and now it doesn't seem to be starting up (or at least I can't tell as I can't get to it). I start it from the unRAID docker page and it shows running, but I just get a HTTP ERROR 400 page when trying to access the web GUI. The docker logs don't show any errors though. [migrations] started [migrations] no migrations found usermod: no changes ─────────────────────────────────────── ██╗ ███████╗██╗ ██████╗ ██║ ██╔════╝██║██╔═══██╗ ██║ ███████╗██║██║ ██║ ██║ ╚════██║██║██║ ██║ ███████╗███████║██║╚██████╔╝ ╚══════╝╚══════╝╚═╝ ╚═════╝ Brought to you by linuxserver.io ─────────────────────────────────────── To support LSIO projects visit: https://www.linuxserver.io/donate/ ─────────────────────────────────────── GID/UID ─────────────────────────────────────── User UID: 99 User GID: 100 ─────────────────────────────────────── [custom-init] No custom files found, skipping... [ls.io-init] done. Tried restarting it multiple times and also tried just leaving it running for 30min+ to see if it would eventually go, but still the same thing. edit: Something with Chrome it seems. If I go to the webgui using Edge, it comes up fine. Edited May 9, 2023 by deusxanime update Quote Link to comment
dellorianes Posted April 26, 2023 Share Posted April 26, 2023 (edited) What is the common speed for a single backup via sFTP? I always get 10 MB/S when doing that regardless of it is compressed or not. Is that a common speed? Thank you. Regards Edited April 26, 2023 by dellorianes Quote Link to comment
dreadu Posted August 7, 2023 Share Posted August 7, 2023 (edited) On 4/24/2023 at 4:43 PM, deusxanime said: Updated this last night and now it doesn't seem to be starting up (or at least I can't tell as I can't get to it). I start it from the unRAID docker page and it shows running, but I just get a HTTP ERROR 400 page when trying to access the web GUI. The docker logs don't show any errors though. [migrations] started [migrations] no migrations found usermod: no changes ─────────────────────────────────────── ██╗ ███████╗██╗ ██████╗ ██║ ██╔════╝██║██╔═══██╗ ██║ ███████╗██║██║ ██║ ██║ ╚════██║██║██║ ██║ ███████╗███████║██║╚██████╔╝ ╚══════╝╚══════╝╚═╝ ╚═════╝ Brought to you by linuxserver.io ─────────────────────────────────────── To support LSIO projects visit: https://www.linuxserver.io/donate/ ─────────────────────────────────────── GID/UID ─────────────────────────────────────── User UID: 99 User GID: 100 ─────────────────────────────────────── [custom-init] No custom files found, skipping... [ls.io-init] done. Tried restarting it multiple times and also tried just leaving it running for 30min+ to see if it would eventually go, but still the same thing. edit: Something with Chrome it seems. If I go to the webgui using Edge, it comes up fine. I had the same behavior. Updated yesterday(?) to latest (2.0.7 from two days ago) and could not connect to the GUI today. Did not check it yesterday. But it did not work neither with Fire Fox, nor Edge. Went back to 2.0.6 now and it is working again. Log looked exactly the same. Will try again with 2.0.8 I suppose. Regards /edit Due to the update from 2.0.6->2.0.7 it seems the underlying DB got updated -> reverting to 2.0.6 fixed the GUI, but the old version can't run backups with the new DB version already in place. As mentioned in the initial post: the message looks exactly the same: [migrations] started [migrations] no migrations found ─────────────────────────────────────── ██╗ ███████╗██╗ ██████╗ ██║ ██╔════╝██║██╔═══██╗ ██║ ███████╗██║██║ ██║ ██║ ╚════██║██║██║ ██║ ███████╗███████║██║╚██████╔╝ ╚══════╝╚══════╝╚═╝ ╚═════╝ Brought to you by linuxserver.io ─────────────────────────────────────── To support LSIO projects visit: https://www.linuxserver.io/donate/ ─────────────────────────────────────── GID/UID ─────────────────────────────────────── User UID: 99 User GID: 100 ─────────────────────────────────────── [custom-init] No custom files found, skipping... [ls.io-init] done. And FireFox, Chrome and Edge all have "Unable to connect", "This site can’t be reached" or " Hmmm… can't reach this page" 😟 /edit #2 further details here https://github.com/linuxserver/docker-duplicati/issues/69 Edited August 7, 2023 by dreadu link to git issue added Quote Link to comment
pappaq Posted October 29, 2023 Share Posted October 29, 2023 Hey there, I've got a problem with my duplicati configuration. Since I've changed my cache pool to ZFS duplicati can't backup the folders which are stored on chache. In the backup configuration window it looks like this: The folders in the red box are not shown as folders and the backups can't run. Any ideas? Quote Link to comment
Rikul Posted December 19, 2023 Share Posted December 19, 2023 On 10/29/2023 at 11:11 AM, pappaq said: Hey there, I've got a problem with my duplicati configuration. Since I've changed my cache pool to ZFS duplicati can't backup the folders which are stored on chache. In the backup configuration window it looks like this: The folders in the red box are not shown as folders and the backups can't run. Any ideas? Hello, I have a similar problem although I don't use ZFS. All my shares use XFS. As far as I can tell I think that all the shares that use the old "cache only" can't see any subfolders. For information I'm using the new 6.12 feature "exclusive shares" for my appdata share and domain for my VM. My appdata is set as /mnt/user/appdata/ The others shares using the cache as primary storage and with the secondary's one as array can dispaly the subfolder. As you can see I was once able to see these subfolder and my backup routine was running fine although I have set it long time ago (unraid 6.9) Now my backup are broken as I have this error : System.IO.IOException: Backup aborted since the source path /source/appdata/Plex-Media-Server/ does not exist. Please verify that the source path exists, or remove the source path from the backup configuration, or set the allow-missing-source option. Any guess ? Quote Link to comment
Wolfhunter1043 Posted January 31 Share Posted January 31 On 2/26/2021 at 3:39 AM, monarc said: Hi everyone, Trying to backup my Unraid Shares to a Synology NAS with Duplicati. Synology is mounted via Unassigned devices with NFS. Backup job is nothing fancy just around 800GB of data encrypted in 50MB blocks and everything else default settings. Backup job is running fine but I always get the following warning at the end. "2021-02-26 09:31:01 +01 - [Warning-Duplicati.Library.Main.Operation.FilelistProcessor-MissingRemoteHash]: remote file duplicati-b6ee2e638e03448d7b58103e0aa972613.dblock.zip.aes is listed as Verified with size 0 but should be 52418413, please verify the sha256 hash \"klbMHsDiDi6MtRgEH2PJRdSASOb8xs8xBLFN5DXXWqw=\" I have found a lot of stuff regarding this in various forums but nothing helped so far. Did someone else encountered this kind of warning and found a (easy) solution to this? Additional can someone tell me how to run list-broken-files (duplicati commandline) in the Duplicati docker container? Looking forward to any reply. Many thanks in advance and have a great day. BR Marc For anyone that has this issue, you run command line (commandline for search on here) via the GUI. Open duplicati then go to your backup. Where you see the normal options for verify database etc, there will be a command line option then you can select it from the options such as list-broken-files or purge-broken-files. Quote Link to comment
theone Posted June 14 Share Posted June 14 (edited) I have setup Duplicati in a test environment (simulated files on temporary cache drive fodler) as following and each time I try to run a backup I get the same error messages: "MessagesActualLength": 3, "WarningsActualLength": 0, "ErrorsActualLength": 2, "Messages": [ "2024-06-14 22:13:16 +03 - [Information-Duplicati.Library.Main.Controller-StartingOperation]: The operation Backup has started", "2024-06-14 22:13:16 +03 - [Information-Duplicati.Library.Main.BasicResults-BackendEvent]: Backend event: List - Started: ()", "2024-06-14 22:13:16 +03 - [Information-Duplicati.Library.Main.BasicResults-BackendEvent]: Backend event: List - Completed: ()" ], "Warnings": [], "Errors": [ "2024-06-14 22:13:16 +03 - [Error-Duplicati.Library.Main.Operation.BackupHandler-FatalError]: Fatal error\nFileNotFoundException: Could not find file \"\"", "2024-06-14 22:13:16 +03 - [Error-Duplicati.Library.Main.Controller-FailedOperation]: The operation Backup has failed with error: Could not find file \"\"\nFileNotFoundException: Could not find file \"\"" ], /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker create --name='duplicati' --net='bridge' --cpuset-cpus='1,2,15,16' -e HOST_OS="Unraid" -e HOST_HOSTNAME="Tower" -e HOST_CONTAINERNAME="duplicati" -e 'CLI_ARGS'='' -e 'PUID'='99' -e 'PGID'='100' -e 'UMASK'='022' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:8200]' -l net.unraid.docker.icon='https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/duplicati-logo.png' -p '8200:8200/tcp' -v '/mnt/cache/temp/duplicati_destination/':'/backups':'rw' -v '/mnt/cache/temp/Noga'\''s Documents/':'/source':'rw' -v '/mnt/cache/temp/duplicati_tmp':'/tmp':'rw' -v '/mnt/cache/unRAID_Apps/Docker/appdata/duplicati':'/config':'rw' 'linuxserver/duplicati' I added the tmp path (although it ins' in the template) but fails with and without it. When doing a cp from the docker console from /source to /backups it works - so no permissions problem. What could be the problem? Edited June 14 by theone Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.