Djoss Posted December 29, 2018 Author Share Posted December 29, 2018 On 12/25/2018 at 10:55 AM, kmarq13 said: Been having an issue since the latest update when I tried to change a backup set. When I try to change the frequency that backups are taken with the dropdown, suddenly the entire browser window goes white (except the File, Edit, etc menu bar). This issue is happening under the frequency and versions section of the manage backup set. Anyone else getting this? It seems to be an issue from CP. Feel free to report it to their support team, so it can get fixed eventually. As a workaround, you can change it from the console (crashplan.com/console). Quote Link to comment
Djoss Posted December 29, 2018 Author Share Posted December 29, 2018 On 12/28/2018 at 12:40 PM, Mikey160984 said: Hi Guys! Thanks for making this Docker available to us, love it so far, and works quiet well. Tried out Duplicati before, but it has too much problems I think. Starts Backup, but stops after 1 TB, keeps showing errors in database (no rep is helping) etc But, there is a thing, that doesn't work very well for me... When I change the resolution of the Crashplan Docker, I get more often a blank white screen if I would like to change something in the settings, especially if there is a drop down menu. If I set the resolution back to 1280 x 768 it gets better, but still this happens sometimes. If this is the case, I have to restart the container otherwise I can't use it because its all blank. Is there a solution for this? Also found out, if I let crashplan detect and set the language it is getting worse... So I changed it from auto to english, I can deal with that point... Which resolution is causing problems? Quote Link to comment
Mikey160984 Posted December 30, 2018 Share Posted December 30, 2018 (edited) I would say... every resolution... from the basic one with wich the docker comes to better ones like 1920x1080 It's like the one before me postet... Dropdown Menu and everything is white... had this problems with the version before the last update also Edit: Just found out... if I log in on the Code42 web page and visit the admin console I can adjust all the same settings easily withouth having the troubles of the white site behaviour of the docker container... so I just can leave the container web ui as it is and I can live with this solution and every thing is fine... for me Edited December 31, 2018 by Mikey160984 Quote Link to comment
FreeMan Posted December 31, 2018 Share Posted December 31, 2018 (edited) OK, time to put CP to the test and restore some stuff because user=id10t ... I'm getting an error that "One or more files failed to be restored because the mapping of the /storage volume is read-only." The message continues to state that I should re-create the container with the volume mapped with read/write permissions. I'm in a bit of panic mode, so I haven't fully read through the github linked page, but is this the "umask" setting in the docker config? It's currently set to 000, but it says that it's for "newly created files", so I'm a bit confused on that. I'll read through docs, but I'd be especially grateful for a quick & confirmed answer instead of my slow reading and not 100% sure answer. UPDATE: I've read through the docs, and it seems that I need to add a parameter called "Home:" and set it to "storage/rw" as follows. Is this correct? Edited December 31, 2018 by FreeMan Quote Link to comment
FreeMan Posted December 31, 2018 Share Posted December 31, 2018 7 hours ago, FreeMan said: I've read through the docs, and it seems that I need to add a parameter called "Home:" and set it to "storage/rw" as follows. Is this correct? That didn't seem to have fixed it. After reading the docs again, I thought that maybe this would do the trick: That left me with this start command which didn't work: Quote root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='CrashPlanPRO' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'USER_ID'='99' -e 'GROUP_ID'='100' -e 'UMASK'='000' -e 'APP_NICENESS'='' -e 'DISPLAY_WIDTH'='1280' -e 'DISPLAY_HEIGHT'='768' -e 'X11VNC_EXTRA_OPTS'='' -e 'CRASHPLAN_SRV_MAX_MEM'='2560m' -e 'SECURE_CONNECTION'='0' -p '7810:5800/tcp' -p '7910:5900/tcp' -v '/mnt/user/:rw':'/storage':'ro' -v '/boot':'/flash':'ro' -v '/mnt/cache/appdata/CrashPlanPRO':'/config':'rw' 'jlesage/crashplan-pro' /usr/bin/docker: Error response from daemon: invalid volume specification: '/mnt/user/:rw:/storage:ro'. See '/usr/bin/docker run --help'. It also left me with an orphaned docker image that I couldn't start or edit. After reinstalling the docker (thanks Squid!) and fixing the /storage mapping, I got this start command, which worked quite nicely: Quote root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='CrashPlanPRO' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'USER_ID'='99' -e 'GROUP_ID'='100' -e 'UMASK'='000' -e 'APP_NICENESS'='' -e 'DISPLAY_WIDTH'='1280' -e 'DISPLAY_HEIGHT'='768' -e 'X11VNC_EXTRA_OPTS'='' -e 'CRASHPLAN_SRV_MAX_MEM'='3g' -e 'SECURE_CONNECTION'='0' -p '7810:5800/tcp' -p '7910:5900/tcp' -v '/mnt/user/':'/storage':'ro' -v '/boot':'/flash':'ro' -v '/mnt/cache/appdata/CrashPlanPRO':'/config':'rw' 'jlesage/crashplan-pro' 53932aafbd88a5a4a7b684bec864e029a5c0f2a4b9ffb9a00cc06af7794d035a But... it's still mounting the storage location as 'ro'. How do I change that? Quote Link to comment
Djoss Posted January 1, 2019 Author Share Posted January 1, 2019 All you need to do is edit the container's settings, enable the advanced view (at the top right), click the Edit button of the Storage parameter and then change the Access Mode to Read/Write. Quote Link to comment
FreeMan Posted January 1, 2019 Share Posted January 1, 2019 1 hour ago, Djoss said: All you need to do is edit the container's settings, enable the advanced view (at the top right), click the Edit button of the Storage parameter and then change the Access Mode to Read/Write. Fantastic, thank you! Considering the purpose of the docker is to backup and restore files, it seems that setting this to read/write by default would make more sense. It would certainly reduce the panic level when one accidentally deletes large quantities of files... Quote Link to comment
JonathanM Posted January 1, 2019 Share Posted January 1, 2019 25 minutes ago, FreeMan said: Considering the purpose of the docker is to backup and restore files, it seems that setting this to read/write by default would make more sense. Backup is typically automatic, restore is manual. I would rather the app NOT have default permissions to overwrite my array. Personally I think it would make more sense to restore to a secondary location on the array, then move the files to their final destination. This would be easy to do, add another mapping to a share specifically set aside to receive data, mounted r/w. Quote Link to comment
FreeMan Posted January 2, 2019 Share Posted January 2, 2019 Backup is typically automatic, restore is manual. I would rather the app NOT have default permissions to overwrite my array. Personally I think it would make more sense to restore to a secondary location on the array, then move the files to their final destination. This would be easy to do, add another mapping to a share specifically set aside to receive data, mounted r/w.That makes sense. Maybe add a default "Restore Point" mapping that's mounted r/w from the get go.Of course, I'm not 100% certain I'd have thought to use that since I blew away entire shares of data and was in a panic state...NOTE TO SELF: do NOT attempt to manually fix unRAID issues from a terminal session without ingesting at least 2 cups of coffee prior to starting! Sent from Tapatalk 1 Quote Link to comment
kmarq13 Posted January 2, 2019 Share Posted January 2, 2019 On 12/30/2018 at 3:10 AM, Mikey160984 said: I would say... every resolution... from the basic one with wich the docker comes to better ones like 1920x1080 It's like the one before me postet... Dropdown Menu and everything is white... had this problems with the version before the last update also Edit: Just found out... if I log in on the Code42 web page and visit the admin console I can adjust all the same settings easily withouth having the troubles of the white site behaviour of the docker container... so I just can leave the container web ui as it is and I can live with this solution and every thing is fine... for me Where are you seeing this on the console? I can view the settings for my backups, but I can't change any of the backup frequencies or things from the Admin Console. Only from within my docker container which has the white screen issue. Quote Link to comment
Mikey160984 Posted January 2, 2019 Share Posted January 2, 2019 Here you Can login https://www.crashplanpro.com/login/#/login?to=%2Fconsole%2FYou can set up everything there, including the folders to backup, witch time etc... It is a bit slower but it works fine and is maintained by Code42.I’m using it and it works perfectly, so I can leave the blank white docker behindGesendet von iPhone mit Tapatalk Pro Quote Link to comment
kmarq13 Posted January 2, 2019 Share Posted January 2, 2019 2 hours ago, Mikey160984 said: Here you Can loginhttps://www.crashplanpro.com/login/#/login?to=%2Fconsole%2F You can set up everything there, including the folders to backup, witch time etc... It is a bit slower but it works fine and is maintained by Code42. I’m using it and it works perfectly, so I can leave the blank white docker behind Gesendet von iPhone mit Tapatalk Pro Ahh found it. Just going into the device its all read only, but up top there is a gear to say edit. Quote Link to comment
Lebowski Posted January 7, 2019 Share Posted January 7, 2019 (edited) been a while since I opened up my crash plan docker, seems the VNC can't connect? Says server disconnected code 1006 The service is still working and backing up just fine. Other browser is working fine. I will clear cache etc etc and test. Cheers. Edited January 7, 2019 by Lebowski Quote Link to comment
Djoss Posted January 7, 2019 Author Share Posted January 7, 2019 7 hours ago, Lebowski said: been a while since I opened up my crash plan docker, seems the VNC can't connect? Says server disconnected code 1006 The service is still working and backing up just fine. Other browser is working fine. I will clear cache etc etc and test. Cheers. Yes, clearing the browser cache should fix the issue. Quote Link to comment
Lebowski Posted January 12, 2019 Share Posted January 12, 2019 (edited) I have found an issue, in the section to change back up frequency on a backup set, when you click the drop down menu the screen blanks out. I have tested this on multiple browsers. Edited January 12, 2019 by Lebowski Quote Link to comment
Djoss Posted January 14, 2019 Author Share Posted January 14, 2019 On 1/11/2019 at 9:29 PM, Lebowski said: I have found an issue, in the section to change back up frequency on a backup set, when you click the drop down menu the screen blanks out. I have tested this on multiple browsers. Yes this is a known issue. Note that as a workaround, you can change this setting from the console at crashplan.com/console Quote Link to comment
Lebowski Posted January 14, 2019 Share Posted January 14, 2019 Cheers, I have been using that. Quote Link to comment
jh1987 Posted January 16, 2019 Share Posted January 16, 2019 (edited) Anyone having issues restoring files. I get an error that the container doesn't have the right permissions. I tried following the steps on github and it created a second container that would start but I could never get to the GUI. I've got all my files backed up and see them in CrashPlan but I just can't seem to restore them. Edited January 16, 2019 by jh1987 Quote Link to comment
Djoss Posted January 17, 2019 Author Share Posted January 17, 2019 14 hours ago, jh1987 said: Anyone having issues restoring files. I get an error that the container doesn't have the right permissions. I tried following the steps on github and it created a second container that would start but I could never get to the GUI. I've got all my files backed up and see them in CrashPlan but I just can't seem to restore them. You just need to change the permission of "/storage": edit the container settings, enable "Advanced View" (upper right toggle), edit the "Storage" setting and change the "Access Mode" to "Read/Write". Quote Link to comment
j7an Posted January 17, 2019 Share Posted January 17, 2019 I'm currently using this container to backup my Time Machine backups to the cloud. I have not added any file exclusions. But it looks like its currently ignoring the following files when backing up: info.bckup info.plist token Is there a way to get these files backed up as well? Quote Link to comment
jh1987 Posted January 17, 2019 Share Posted January 17, 2019 9 hours ago, Djoss said: You just need to change the permission of "/storage": edit the container settings, enable "Advanced View" (upper right toggle), edit the "Storage" setting and change the "Access Mode" to "Read/Write". Thank you! Always forget about the "Advanced View". That did the trick for me. Appreciate your help. I don't understand why /storage does default to read/write when installing the app. Quote Link to comment
JonathanM Posted January 17, 2019 Share Posted January 17, 2019 4 minutes ago, jh1987 said: Thank you! Always forget about the "Advanced View". That did the trick for me. Appreciate your help. I don't understand why /storage does default to read/write when installing the app. It doesn't default to read / write because it's another layer of protection for your files. If the container is only allowed to read your files, it can't delete or overwrite them. Normally the only time you want the backup application to be able to write and delete is when you are recovering files. At all other times you only want it to read and backup what it reads. Quote Link to comment
Djoss Posted January 17, 2019 Author Share Posted January 17, 2019 3 hours ago, j7an said: I'm currently using this container to backup my Time Machine backups to the cloud. I have not added any file exclusions. But it looks like its currently ignoring the following files when backing up: info.bckup info.plist token Is there a way to get these files backed up as well? There is some built-in exclusions. You can edit /mnt/user/appdata/CrashPlanPRO/conf/my.service.xml and see if you can remove the ones you don't want. Quote Link to comment
ZataH Posted January 19, 2019 Share Posted January 19, 2019 (edited) I have a issue writing to local disk. Tried with user share and rclone disk, but Crashplan fail to add it as destination Edited January 19, 2019 by ZataH Quote Link to comment
Squid Posted January 19, 2019 Share Posted January 19, 2019 Whether it's your problem or not I have no clue, but technically any mount of /mnt/disks/... should have an access mode of RW:Slave (you can also try Shared) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.