drzaph Posted April 23, 2019 Share Posted April 23, 2019 The most recent Homebridge w/ UI fixed the install and setup. I’m up and running again. Thanks. Quote Link to comment
spl147 Posted April 25, 2019 Share Posted April 25, 2019 logs still do not work with the latest docker for homebridge with gui Quote Link to comment
daze Posted April 28, 2019 Share Posted April 28, 2019 H265ize is still providing the same error: [h265ize]: [alert] The following videos (1) were not encoded: - /mnt/user/h265ize/input/[redacted].mkv: ffmpeg exited with code 1: Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument This is the mediainfo on the input file: Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings : CABAC / 5 Ref Frames Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Codec ID : V_MPEG4/ISO/AVC Duration : 39 min 29 s Bit rate : 3 487 kb/s Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 59.940 (60000/1001) FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.063 Stream size : 985 MiB (90%) Writing library : x264 core 157 r2935 545de2f Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=8 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=crf / mbtree=1 / crf=18.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 Default : Yes Forced : No Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Codec ID : A_AC3 Duration : 39 min 29 s Bit rate mode : Constant Bit rate : 384 kb/s Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 kHz Frame rate : 31.250 FPS (1536 SPF) Bit depth : 16 bits Compression mode : Lossy Stream size : 108 MiB (10%) Language : English Service kind : Complete Main Default : Yes Forced : No Text ID : 3 Format : UTF-8 Codec ID : S_TEXT/UTF8 Codec ID/Info : UTF-8 Plain Text Duration : 39 min 17 s Bit rate : 329 b/s Count of elements : 1318 Stream size : 94.8 KiB (0%) Language : English Default : No Forced : No It just seems to exit even if no files are found in input dir. Are you planning on fixing this? Quote Link to comment
nicksphone Posted May 1, 2019 Share Posted May 1, 2019 H265ize h264 - mpeg-4 AVC (part10) (avc1) in a mkv wrapper will not re-encode Quote Link to comment
Umizoomi Posted May 2, 2019 Share Posted May 2, 2019 Can't get the homebridge docker either with or without GUI running. With GUI it just doesnt start, according to the logs it should have as its giving a code. Without GUI wont start up because of: [5/3/2019, 12:46:35 AM] Loaded config.json with 0 accessories and 1 platforms. [5/3/2019, 12:46:35 AM] --- [5/3/2019, 12:46:35 AM] Loaded plugin: homebridge-info [5/3/2019, 12:46:35 AM] Registering platform 'homebridge-info.Info' [5/3/2019, 12:46:35 AM] --- [5/3/2019, 12:46:35 AM] Loaded plugin: homebridge-pilight [5/3/2019, 12:46:35 AM] Registering accessory 'homebridge-pilight.pilight' [5/3/2019, 12:46:35 AM] --- [5/3/2019, 12:46:35 AM] Loading 1 platforms... /usr/local/lib/node_modules/homebridge/lib/api.js:122 throw new Error("The requested platform '" + name + "' was not registered by any plugin."); ^ Error: The requested platform 'config' was not registered by any plugin. at API.platform (/usr/local/lib/node_modules/homebridge/lib/api.js:122:13) at Server._loadPlatforms (/usr/local/lib/node_modules/homebridge/lib/server.js:316:45) at Server.run (/usr/local/lib/node_modules/homebridge/lib/server.js:86:36) at module.exports (/usr/local/lib/node_modules/homebridge/lib/cli.js:45:10) at Object.<anonymous> (/usr/local/lib/node_modules/homebridge/bin/homebridge:17:22) at Module._compile (module.js:652:30) at Object.Module._extensions..js (module.js:663:10) at Module.load (module.js:565:32) at tryModuleLoad (module.js:505:12) Now, what am I doing wrong? Really would like to connect my milights to homekit :)) Quote Link to comment
pingmanping Posted May 3, 2019 Share Posted May 3, 2019 On 4/19/2019 at 1:27 PM, Siwat2545 said: You actually need to proxy pass it to port 4430 if you are using the ssl certificate, both documents server and community server need to be proxypassed to using ssl port (4430 And 4431 respectively) Sent from my Pixel 3 using Tapatalk I got it work with Nextcloud and locally (community server); however, today, I get this when I tried to access the community server. This was working before. Quote Link to comment
EgillSkallagrimsson Posted May 4, 2019 Share Posted May 4, 2019 On 5/3/2019 at 9:29 AM, pingmanping said: I got it work with Nextcloud and locally (community server); however, today, I get this when I tried to access the community server. This was working before. Same issue here after a weekly, scheduled update. Tried a fresh install and still have the same problem. Quote Link to comment
pingmanping Posted May 5, 2019 Share Posted May 5, 2019 2 hours ago, EgillSkallagrimsson said: Same issue here after a weekly, scheduled update. Tried a fresh install and still have the same problem. I tried to reinstall and still got the same page. Quote Link to comment
Siwat2545 Posted May 5, 2019 Author Share Posted May 5, 2019 I tried to reinstall and still got the same page. Can you try changing the directorySent from my Pixel 3 using Tapatalk Quote Link to comment
bg112477 Posted May 5, 2019 Share Posted May 5, 2019 Where do you change settings in h265ize, such as changing output format to 720p? Quote Link to comment
pingmanping Posted May 5, 2019 Share Posted May 5, 2019 4 hours ago, Siwat2545 said: Can you try changing the directory Sent from my Pixel 3 using Tapatalk I am sorry I am not familiar with your software. What do you mean by changing the directory? Can you please be more specific? Quote Link to comment
Siwat2545 Posted May 5, 2019 Author Share Posted May 5, 2019 I am sorry I am not familiar with your software. What do you mean by changing the directory? Can you please be more specific? Changing the config directory in unraid docker config (used to be/mnt/user/appdata/onlyofficeds or onlyofficecs) Sent from my Pixel 3 using Tapatalk Quote Link to comment
pingmanping Posted May 5, 2019 Share Posted May 5, 2019 1 hour ago, Siwat2545 said: Changing the config directory in unraid docker config (used to be/mnt/user/appdata/onlyofficeds or onlyofficecs) Sent from my Pixel 3 using Tapatalk It is still didn't work. My appdata is in cache. I tried to move everything to the /mnt/user/.. but I still getting the same Runtime Error Quote Link to comment
EgillSkallagrimsson Posted May 6, 2019 Share Posted May 6, 2019 19 hours ago, Siwat2545 said: Can you try changing the directory Sent from my Pixel 3 using Tapatalk One of the last things I tried, too. Clean install with a fresh config directory. Same error. Quote Link to comment
nicksphone Posted May 6, 2019 Share Posted May 6, 2019 (edited) On 4/20/2019 at 3:27 AM, Siwat2545 said: Just fixed it 🙂 Building now PS: my docker file is https://github.com/SiwatINC/h265ize_unraid/blob/master/Dockerfile Sent from my Pixel 3 using Tapatalk is there a way to add more codecs? simple .ts files recorded in plex are failing as well as 10 bit h264 files Edited May 6, 2019 by nicksphone typo Quote Link to comment
Siwat2545 Posted May 7, 2019 Author Share Posted May 7, 2019 is there a way to add more codecs? simple .ts files recorded in plex are failing as well as 10 bit h264 filesI'm sorry but I do not knowSent from my Pixel 3 using Tapatalk Quote Link to comment
nicksphone Posted May 7, 2019 Share Posted May 7, 2019 9 hours ago, Siwat2545 said: I'm sorry but I do not know Sent from my Pixel 3 using Tapatalk ok thanks for the reply and thanks for taking to time to make the docker Quote Link to comment
darbronnoco Posted May 15, 2019 Share Posted May 15, 2019 Seems Homebridge may need a Node upgrade to work. I just updated and got the below message in logs. I’m not really sure how to revert my home bridge at this point and the container won’t start now. [5/14/2019, 11:13:07 PM] Plugin /usr/local/lib/node_modules/homebridge-config-ui-x requires Node version of >=8.15.1 which does not satisfy the current Node version of v8.10.0. You may need to upgrade your installation of Node. Quote Link to comment
drzaph Posted May 16, 2019 Share Posted May 16, 2019 For the Homebridge plugin, do I have to add the plug-in name to the space-separate list of plugins in the docker template every time I install a new one? Forces a brand new installation (though settings/config saved) every time... Quote Link to comment
Siwat2545 Posted May 17, 2019 Author Share Posted May 17, 2019 15 hours ago, drzaph said: For the Homebridge plugin, do I have to add the plug-in name to the space-separate list of plugins in the docker template every time I install a new one? Forces a brand new installation (though settings/config saved) every time... Yes that is correct Quote Link to comment
EricCharlotteNC Posted May 19, 2019 Share Posted May 19, 2019 Thanks so much for the work on this! I haven't migrated my homebridge configuration yet from the PI. Would it be possible to upgrade the node version to 10 in the next release? I believe that is the latest supported version and I have one plug-in for Lutron Caseta Pico's that requires node 10. Quote Link to comment
spl147 Posted May 21, 2019 Share Posted May 21, 2019 On 5/15/2019 at 12:37 AM, darbronnoco said: Seems Homebridge may need a Node upgrade to work. I just updated and got the below message in logs. I’m not really sure how to revert my home bridge at this point and the container won’t start now. [5/14/2019, 11:13:07 PM] Plugin /usr/local/lib/node_modules/homebridge-config-ui-x requires Node version of >=8.15.1 which does not satisfy the current Node version of v8.10.0. You may need to upgrade your installation of Node. from the unraid command prompt: docker exec -it CONTAINERNAME /bin/bash curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - apt-get install -y nodejs Quote Link to comment
spl147 Posted May 21, 2019 Share Posted May 21, 2019 (edited) On 5/19/2019 at 6:07 AM, EricCharlotteNC said: Thanks so much for the work on this! I haven't migrated my homebridge configuration yet from the PI. Would it be possible to upgrade the node version to 10 in the next release? I believe that is the latest supported version and I have one plug-in for Lutron Caseta Pico's that requires node 10. from the unraid command prompt: docker exec -it CONTAINERNAME /bin/bash curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - sudo apt-get install -y nodejs Edited May 21, 2019 by spl147 Quote Link to comment
Siwat2545 Posted May 21, 2019 Author Share Posted May 21, 2019 1 hour ago, spl147 said: from the unraid command prompt: docker exec -it CONTAINERNAME /bin/bash curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - apt-get install -y nodejs Pull request merged building Quote Link to comment
spl147 Posted May 21, 2019 Share Posted May 21, 2019 (edited) 9 hours ago, Siwat2545 said: Pull request merged building no update is showing, if i force a update it still pulls down the old version looking at your dockerfile, you changed what i submitted. for apt-get install nodejs you have apt-get install node.js npm there is no . in install nodejs and npm is installed by default Edited May 21, 2019 by spl147 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.