Pducharme Posted February 16, 2019 Share Posted February 16, 2019 Just now, aptalca said: From the first page. . . Yes I know. I thought that new big feature also would drive the update release. (like supporting a whole new Nvidia family - Turing). I don't need it myself, so I don't really care Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 1 hour ago, Dazog said: Thanks for the info. Slackbuilds shows 418.30 posted. I would wait until next month when Geforce 1660Ti cards come out. Because 418.30 and above supports Turing Streaming for new cards with New Nvidia Video Codec SDK 9 https://developer.nvidia.com/nvidia-video-codec-sdk That's a new update, when I built RC4 last night it was still 410.78 Link to comment
Dazog Posted February 16, 2019 Share Posted February 16, 2019 Just now, CHBMB said: That's a new update, when I built RC4 last night it was still 410.78 Ok, not complaining I doubt many people are using expensive Turing cards for this yet Link to comment
Pducharme Posted February 16, 2019 Share Posted February 16, 2019 That's a new update, when I built RC4 last night it was still 410.78Yes it came out after your build. When rc5 will be out, I suppose you will use this version. Envoyé de mon iPhone en utilisant Tapatalk Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 Just now, Pducharme said: Yes it came out after your build. When rc5 will be out, I suppose you will use this version. Envoyé de mon iPhone en utilisant Tapatalk Correct. Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 Just now, Dazog said: Ok, not complaining I doubt many people are using expensive Turing cards for this yet I know, I didn't think you were complaining. Your post surprised me as I hadn't realised the drivers were updated. To put it in perspective using 24 cores of my Xeon processor and 32GB of RAM, these builds take nearly an hour to produce.... 1 1 Link to comment
Pducharme Posted February 16, 2019 Share Posted February 16, 2019 2 minutes ago, CHBMB said: Correct. Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 34 minutes ago, Pducharme said: Yes I know. I thought that new big feature also would drive the update release. (like supporting a whole new Nvidia family - Turing). I don't need it myself, so I don't really care If we had a barrage of users coming along with shiny new cards, I might feel differently, but otherwise it's purely theoretical. 1 Link to comment
Pducharme Posted February 16, 2019 Share Posted February 16, 2019 (edited) I Agree. Im very impress so far with this anyway . My aging e3-1240v3 is now at only 10-15% usage with HW transcode while before, it was hitting 90-100% all the time. Edited February 16, 2019 by Pducharme Link to comment
JasonM Posted February 16, 2019 Share Posted February 16, 2019 I'm looking for some assistance from people smarter than me as I have reached the end of my troubleshooting and googling ability to get this working. When I install the NVIDIA unRAID build, disks connected to my PCIe SATA controller are not recognized by unRAID. This can be replicated even with no GPU installed, so the GPU isn’t the problem. If I revert back to vanilla unRAID, the disks come back. Even with a GPU installed, booting under vanilla, all drives come up. BIOS settings look good as far as I can tell and I've gone as far as to backup and nuke my USB to start from scratch. Same result. Anyone else seeing this or have some suggestions as to what I can try next? Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 (edited) 3 minutes ago, JasonM said: I'm looking for some assistance from people smarter than me as I have reached the end of my troubleshooting and googling ability to get this working. When I install the NVIDIA unRAID build, disks connected to my PCIe SATA controller are not recognized by unRAID. This can be replicated even with no GPU installed, so the GPU isn’t the problem. If I revert back to vanilla unRAID, the disks come back. Even with a GPU installed, booting under vanilla, all drives come up. BIOS settings look good as far as I can tell and I've gone as far as to backup and nuke my USB to start from scratch. Same result. Anyone else seeing this or have some suggestions as to what I can try next? I can't think of any reason why that should be the case. But what PCIe SATA controller are you using for starters? Only reason I can think of is if it's an out of tree driver that we've missed and haven't compiled in. Edited February 16, 2019 by CHBMB Link to comment
JasonM Posted February 16, 2019 Share Posted February 16, 2019 2 minutes ago, CHBMB said: I can't think of any reason why that should be the case. But what PCIe SATA controller are you using for starters? Only reason I can think of is if it's an out of tree driver that we've missed and haven't compiled in. I'm using a High Point Rocket 750. It's the one that comes in the 45Drives Storinator chassis. Link to comment
Pducharme Posted February 16, 2019 Share Posted February 16, 2019 14 minutes ago, JasonM said: I'm using a High Point Rocket 750. It's the one that comes in the 45Drives Storinator chassis. Wow do you have a storinator from 45drives?? Link to comment
JasonM Posted February 16, 2019 Share Posted February 16, 2019 Just now, Pducharme said: Wow do you have a storinator from 45drives?? Kind of. I snagged an old chassis off of eBay. It had the case, power supply, and old board, RAM, Celeron, a 10G Ethernet card, and 2x Rocket 750s. I moved my unRAID hardware into the case and ran it for a few months, but it was just too big and too loud for my home office environment. So I pulled one of the 750s and stuck it in my existing machine. I have 15 drives crammed into the Fractal case and then a converter that takes two of the SFF connectors on the 750 and makes them external. I can run those to a JBOD disk chassis vis SFF or eSATA. I might move back into the 45Drives case down the road when I have a better place to put it. Link to comment
CHBMB Posted February 16, 2019 Share Posted February 16, 2019 I'm using a High Point Rocket 750. It's the one that comes in the 45Drives Storinator chassis.Hmmm, I though the Rocket drivers were no longer required. Let me speak to LT after reviewing the RC release notes, maybe I missed something about OOT drivers.Sent from my Mi A1 using Tapatalk Link to comment
JasonM Posted February 17, 2019 Share Posted February 17, 2019 10 minutes ago, CHBMB said: Hmmm, I though the Rocket drivers were no longer required. Let me speak to LT after reviewing the RC release notes, maybe I missed something about OOT drivers. Sent from my Mi A1 using Tapatalk Thanks. I’ll sit tight and monitor the thread. FWIW, I’m on 6.6.6, not the RC. Maybe that’s my problem? Link to comment
CHBMB Posted February 17, 2019 Share Posted February 17, 2019 Thanks. I’ll sit tight and monitor the thread. FWIW, I’m on 6.6.6, not the RC. Maybe that’s my problem?I'll check, it's been a while since I compiled V6.6.6, fwiw the RC builds should work.Sent from my Mi A1 using Tapatalk Link to comment
Iceman Posted February 17, 2019 Share Posted February 17, 2019 (edited) Any idea why this is happening? This is only 1 stream transcoding and it is pegging my i5-8400 I turned off HW transcoding and now the same stream is running about 10% total cpu utilization with software transcoding. Edited February 17, 2019 by Iceman Link to comment
CHBMB Posted February 17, 2019 Share Posted February 17, 2019 Any idea why this is happening? This is only 1 stream transcoding and it is pegging my i5-8400 I turned off HW transcoding and now the same stream is running about 10% total cpu utilization with software transcoding. What Nvidia card are you using? Sent from my Mi A1 using Tapatalk Link to comment
Iceman Posted February 17, 2019 Share Posted February 17, 2019 (edited) Evga 1060 3gb Showing as a P106 gpu Edited February 17, 2019 by Iceman Link to comment
JasonM Posted February 17, 2019 Share Posted February 17, 2019 (edited) 2 hours ago, CHBMB said: I'll check, it's been a while since I compiled V6.6.6, fwiw the RC builds should work. Sent from my Mi A1 using Tapatalk Thanks again. This gave me a few things to try, but unfortunately, still no dice. The issues are clearly with the Rocket 750 drivers and exist in vanilla unRAID, so I may need to move this to a more appropriate forum. For the sake of discussion, here's where I am: I nuked the USB again and installed RC3 with the USB Creator. It hung for a very long time while booting, so I dusted off a display, keyboard and mouse to see what was going on. The messages it hags on are all related to the 750. Once boot completes, it also take forever for emhttp to start. Between the two hangups, we're talking 5+ minutes to boot. The drives attached to the 750 did not show up. I upgraded in the unRAID web UI from RC3 to RC4 with the same result. I nuked the USB again, installed 6.6.6 via the USB Creator, booted normally with all drives recognized. Upgraded directly to RC4 from the web UI, and got the same result as above. None of these were the NVIDIA builds, and none of them had any config files carried over. They were all clean. So it seems the 750 is just not going to cooperate with 6.7 at the moment. I'm open to any suggestions y'all may have. If 6.7 goes GM and breaks 750 support, I'm going to be SOL. Edited February 17, 2019 by JasonM Link to comment
Dazog Posted February 17, 2019 Share Posted February 17, 2019 Has anyone figured out how to monitor this in Netdata or through telegraf to Grafana? Instead of having the smi window open? I found this docker: https://github.com/D34DC3N73R/netdata-glibc Cannot get it to display any of the gpu stats Link to comment
trurl Posted February 17, 2019 Share Posted February 17, 2019 1 hour ago, JasonM said: I'm open to any suggestions y'all may have. If 6.7 goes GM and breaks 750 support, I'm going to be SOL. If you don't report it you may be SOL Link to comment
JasonM Posted February 17, 2019 Share Posted February 17, 2019 12 minutes ago, trurl said: If you don't report it you may be SOL Advise taken. Link to comment
Dazog Posted February 17, 2019 Share Posted February 17, 2019 I wonder if this can be included some how to control fan speeds: https://github.com/nan0s7/nfancurve Link to comment
Recommended Posts