rama3124 Posted August 6, 2023 Share Posted August 6, 2023 (edited) I'm trying to setup invoice ninja but the container doesn't start. The logs show the following error: Exit Code: 1(General error) Working directory: /var/www/app Output: ================ Error Output: ================ ERROR 2005 (HY000): Unknown server host '192.168.1.177:3306' (-2) Anyone know what is going wrong here? TIA Edited August 6, 2023 by rama3124 Quote Link to comment
Beardown27 Posted August 6, 2023 Share Posted August 6, 2023 Hello, I installed the Backblaze docker from tessypowder and I cannot see my shares or drives inside Backblaze. Am I supposed to map my shares somewhere in the settings? When I try to check the Z drive on the attached screenshot, I get "Backblaze could not create a read-writable '.bzvol' directory on that drive." I'm at a loss on how to backup my media storage on the array. Any thoughts? Quote Link to comment
trurl Posted August 6, 2023 Share Posted August 6, 2023 41 minutes ago, Beardown27 said: map my shares Post docker run command Quote Link to comment
bobvilla Posted August 8, 2023 Share Posted August 8, 2023 (edited) (Backblaze Personal Backup) I'm still unsure where I am making a mistake. I cannot get drive_d to show up in the GUI. I have C which is check marked and Z which cannot be clicked. I have "/mnt/user/HomeMedia/" in the edit page. I've reinstalled multiple times including deleting the Dockers folder. W Unraid I almost never have issues but when I do it's usually due to mapping drives etc. How else can I get my data to show up so I can back it up? Edited August 8, 2023 by bobvilla Quote Link to comment
spyd4r Posted August 9, 2023 Share Posted August 9, 2023 (edited) Appears to be an issue with the old version of unifi-poller in golift/unifi-poller (last updated 2 years ago), solution is to upgrade to v2.7.x https://github.com/unpoller/unpoller/issues/575 https://github.com/unpoller/unpoller/issues/582 Think it works if you just update the Repository field to ghcr.io/unpoller/unpoller Edited August 9, 2023 by spyd4r Quote Link to comment
bobvilla Posted August 12, 2023 Share Posted August 12, 2023 On 8/6/2023 at 3:16 PM, trurl said: Post docker run command docker run -d --name='Backblaze_Personal_Backup' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Tower" -e HOST_CONTAINERNAME="Backblaze_Personal_Backup" -e 'SECURE_CONNECTION'='0' -e 'TZ'='Etc/UTC' -e 'DISPLAY_WIDTH'='657' -e 'DISPLAY_HEIGHT'='473' -e 'VNC_PASSWORD'='' -e 'X11VNC_EXTRA_OPTS'='' -e 'ENABLE_CJK_FONT'='' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:5800]/' -l net.unraid.docker.icon='https://www.backblaze.com/pics/cloud-blaze.png' -p '5802:5800/tcp' -p '5902:5900/tcp' -v '/mnt/user/HomeMedia/':'/drive_d/':'rw' -v '/mnt/user/appdata/Backblaze_Personal_Backup':'/config':'rw' --init 'tessypowder/backblaze-personal-wine' bfb21..... Quote Link to comment
J05u Posted August 14, 2023 Share Posted August 14, 2023 Can someone please explain for what Scrutiny has 2 rows in template? And how I can populate them correctly? I most likely don't need them, but for educational purposes and full container functionality will be nice to understand Quote Link to comment
TedStriker Posted August 15, 2023 Share Posted August 15, 2023 (edited) [Backblaze_Personal_Backup] When I upgraded Unraid from 6.11.x to 6.12.x (currently on 6.12.3), Backblaze_Personal_Backup just stopped seeing anything to back up in the /drive_d/ share (which is set to /mnt/user/), which caused Backblaze to nuke the multi-terabyte backup I had before I realized the docker went kaput. I've tried uninstalling, reinstalling, uninstalling some more, deleting the docker appdata and the .bzdata folders then reinstalling, but all to no avail; the D drive does show in the Backblaze settings in the docker and I can even see the all of the correct directories under /mnt/user/ mapped to Backblaze's D drive when I go to exclude folders from the backup, but the main screen basically shows absolutely nothing to backup. The docker run log: docker run -d --name='Backblaze_Personal_Backup' --net='bridge' -e TZ="America/Chicago" -e HOST_OS="Unraid" -e HOST_HOSTNAME="*********" -e HOST_CONTAINERNAME="Backblaze_Personal_Backup" -e 'SECURE_CONNECTION'='0' -e 'TZ'='America/Chicago' -e 'DISPLAY_WIDTH'='657' -e 'DISPLAY_HEIGHT'='473' -e 'VNC_PASSWORD'='' -e 'X11VNC_EXTRA_OPTS'='' -e 'ENABLE_CJK_FONT'='' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:5800]/' -l net.unraid.docker.icon='https://www.backblaze.com/pics/cloud-blaze.png' -p '5805:5800/tcp' -p '5905:5900/tcp' -v '/mnt/user/':'/drive_d/':'rw' -v '/mnt/user/appdata/Backblaze_Personal_Backup':'/config':'rw' --init 'tessypowder/backblaze-personal-wine' 3d5be5c3286526b80989a38744d67ba9280497dd1823ce395cdb39193ff94bf8 The command finished successfully! Edit (8/15/23): After reinstalling Backblaze_Personal_Backup last night and it still not working through this morning, I had to shut down Unraid to do some hardware stuff this afternoon; when I got Unraid started back up, Backblaze_Personal_Backup started working again as it should and is backing my /mnt/user/ stuff up as we speak. I have no idea what happened and if the Unraid shutdown/restart was what did got things working again, but I'll take what I can get Edited August 16, 2023 by TedStriker Problem resolved itself Quote Link to comment
Taako Posted August 15, 2023 Share Posted August 15, 2023 [Backblaze Personal] Is there a way to mount different shares to different dives? I'd like each share to have its own drive letter in Personal Backup. Otherwise i have to just mount `/mnt/user/` to `drive_d` and there are shares i dont want to back up Quote Link to comment
TedStriker Posted August 15, 2023 Share Posted August 15, 2023 5 minutes ago, Taako said: [Backblaze Personal] Is there a way to mount different shares to different dives? I'd like each share to have its own drive letter in Personal Backup. Otherwise i have to just mount `/mnt/user/` to `drive_d` and there are shares i dont want to back up You shouldn't need to; see my post above for a screenshot. While in the docker, go into the Backblaze settings to "Exclusions" and add folders that are in the D drive you don't want to backup; save and, if all else is well, Bob's your uncle. Quote Link to comment
TedStriker Posted August 16, 2023 Share Posted August 16, 2023 [Backblaze_Personal_Backup] Well, my issue posted above apparently resolved itself, but another issue that I've had for months on end is still bugging me; is there any way to get rid of this error popup? Quote Link to comment
bobvilla Posted August 16, 2023 Share Posted August 16, 2023 How did you get it to even see your "drive_d" I cannot even get it to see it. I've reinstalled 3 or 4 times and each time deleted it's appdata folder too. I'm about to give up and just use an external drive lol. Quote Link to comment
TedStriker Posted August 16, 2023 Share Posted August 16, 2023 (edited) 38 minutes ago, bobvilla said: How did you get it to even see your "drive_d" I cannot even get it to see it. I've reinstalled 3 or 4 times and each time deleted it's appdata folder too. I'm about to give up and just use an external drive lol. All I've ever done is leave the default mapping of /mnt/user/ to /drive_d/ in the docker settings; the issue I was having for weeks after going to 6.12.x until just earlier this afternoon was while I could see the /mnt/user/ folders in the D drive in the Settings->Exclusions tab and could even set folders to exclude, Backblaze didn't see any actual data to back up (again, till I shut down/restarted this afternoon). It may be a stupid question, but have you tried these troubleshooting steps (scroll towards the bottom)? https://hub.docker.com/r/tessypowder/backblaze-personal-wine Quote The backup folder mounted as drive D is not being backed up Explanation: Depending on when you added drive D to your wine configuration, the Backblaze installer might not recognize it Solution: Open the Backblaze settings In the section "Hard Drives" in the first tab "Settings" enable the checkbox for next to the drive D:\ Still not working: Run docker exec --user app Backblaze_Personal_Backup ls -la /config/wine/dosdevices/ (Note: this command is run in Unraid's console, not the docker's console. Also, I capitalized the docker name in that command, as the docker currently available through Community Apps is titled that way by default. - TedStriker) The output should look like this: drwxr-xr-x 2 app app 4096 Jan 16 13:43 . drwxr-xr-x 4 app app 4096 Jan 16 14:08 .. lrwxrwxrwx 1 app app 10 Jan 16 13:43 c: -> ../drive_c lrwxrwxrwx 1 app app 10 Jan 16 13:43 d: -> /drive_d/ lrwxrwxrwx 1 app app 1 Jan 16 13:43 z: -> / If it doesn't look like above try step 10 - 11 again Edited August 16, 2023 by TedStriker Quote Link to comment
bobvilla Posted August 16, 2023 Share Posted August 16, 2023 I'll look through the troubleshooting again but it hasn't helped. Maybe I've mapped my media drive too deep into the folders, maybe I should just set it to /mnt/data/ like you did. I'll give it a shot. Thanks! Quote Link to comment
TedStriker Posted August 16, 2023 Share Posted August 16, 2023 (edited) 10 minutes ago, bobvilla said: I'll look through the troubleshooting again but it hasn't helped. Maybe I've mapped my media drive too deep into the folders, maybe I should just set it to /mnt/data/ like you did. I'll give it a shot. Thanks! Oops, the default /drive_d/ mapping is to /mnt/user/, not /mnt/data/; corrected above. Refresh my previous post for that correction, as well as a couple of more clarifications. Edited August 16, 2023 by TedStriker Quote Link to comment
Taako Posted August 17, 2023 Share Posted August 17, 2023 (edited) On 8/6/2023 at 11:34 AM, Beardown27 said: Hello, I installed the Backblaze docker from tessypowder and I cannot see my shares or drives inside Backblaze. Am I supposed to map my shares somewhere in the settings? When I try to check the Z drive on the attached screenshot, I get "Backblaze could not create a read-writable '.bzvol' directory on that drive." I'm at a loss on how to backup my media storage on the array. Any thoughts? I'm hitting the exact same issue... My docker run command is Quote docker run -d --name='Backblaze_Personal_Backup' --net='bridge' -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Omega" -e HOST_CONTAINERNAME="Backblaze_Personal_Backup" -e 'SECURE_CONNECTION'='0' -e 'TZ'='Etc/UTC' -e 'DISPLAY_WIDTH'='657' -e 'DISPLAY_HEIGHT'='473' -e 'VNC_PASSWORD'='' -e 'X11VNC_EXTRA_OPTS'='' -e 'ENABLE_CJK_FONT'='' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:5800]/' -l net.unraid.docker.icon='https://www.backblaze.com/pics/cloud-blaze.png' -p '5800:5800/tcp' -p '5900:5900/tcp' -v '/mnt/user/':'/drive_d/':'rw' -v '/mnt/user/appdata/Backblaze_Personal_Backup':'/config':'rw' --init 'tessypowder/backblaze-personal-wine' 730cd099e90cf713a94a78157d0a560fb31fab29a92555a1646e24f45b80f5b6 also for some reason its showing as drive Z not D EDIT: figured it out, i missed the installation step to do `ln -s /drive_d/ /config/wine/dosdevices/d:` in the docker. Now it sees drive D map directly! Edited August 17, 2023 by Taako Quote Link to comment
bobvilla Posted August 17, 2023 Share Posted August 17, 2023 1 hour ago, Taako said: I'm hitting the exact same issue... My docker run command is also for some reason its showing as drive Z not D EDIT: figured it out, i missed the installation step to do `ln -s /drive_d/ /config/wine/dosdevices/d:` in the docker. Now it sees drive D map directly! I remember that in the install but maybe I didn't do it correctly. Where did you place that line? In the extra param section? Thanks! Quote Link to comment
Taako Posted August 17, 2023 Share Posted August 17, 2023 9 hours ago, bobvilla said: I remember that in the install but maybe I didn't do it correctly. Where did you place that line? In the extra param section? Thanks! I went into the docker container itself and executed it. Click on the container icon, then click "Console". Execute within the window that pops up Quote Link to comment
Taako Posted August 17, 2023 Share Posted August 17, 2023 It seems there is still *some* issue and im not sure where if its going to be problemtic or not. Whenever i start the server i get this error about permissions issue for C:/ProgramData/Backblaze/bzdata/bzreports Does anyone know how to resolve this? Docker run command is that same as i posted in my earlier comment Quote Link to comment
bobvilla Posted August 18, 2023 Share Posted August 18, 2023 12 hours ago, Taako said: I went into the docker container itself and executed it. Click on the container icon, then click "Console". Execute within the window that pops up Thanks for the help I got it figured out now!!!! I can see D drive in the UI but it scans the files and stops with a tiny bit remaining. Do I let this run hours for around 4tb of files? I left it before for 4 hours and it was hadn't finished. Quote Link to comment
Taako Posted August 18, 2023 Share Posted August 18, 2023 (edited) 10 hours ago, bobvilla said: Thanks for the help I got it figured out now!!!! I can see D drive in the UI but it scans the files and stops with a tiny bit remaining. Do I let this run hours for around 4tb of files? I left it before for 4 hours and it was hadn't finished. I just restarted when it hung and it let me past EDIT: It seems it let me past but it did not work properly to back up. Instead i re-installed the container (deleting the appdata) and did not do the symbolic link until after it had gotten to the back up page. then i did the symbolic link and restarted the container. It took some time to scan the new drive so i left it running over night, now in the morning its backing up Edited August 18, 2023 by Taako Quote Link to comment
Taako Posted August 19, 2023 Share Posted August 19, 2023 On 8/17/2023 at 8:28 AM, Taako said: It seems there is still *some* issue and im not sure where if its going to be problemtic or not. Whenever i start the server i get this error about permissions issue for C:/ProgramData/Backblaze/bzdata/bzreports Does anyone know how to resolve this? Docker run command is that same as i posted in my earlier comment im still seeing this pop-up frequently. Anyone know how to resolve? backups seem to be working for my D drive Quote Link to comment
bobvilla Posted August 19, 2023 Share Posted August 19, 2023 5 hours ago, Taako said: im still seeing this pop-up frequently. Anyone know how to resolve? backups seem to be working for my D drive After fixing my drive_d I get these warnings too. I remember the first guide I followed when trying setup mentioned to put a folder in the exclusions tab but now I can't find that guide. Quote Link to comment
bobvilla Posted August 19, 2023 Share Posted August 19, 2023 5 hours ago, Taako said: im still seeing this pop-up frequently. Anyone know how to resolve? backups seem to be working for my D drive Check step 19 in this apps installation instructions. Quote Link to comment
Taako Posted August 19, 2023 Share Posted August 19, 2023 37 minutes ago, bobvilla said: Check step 19 in this apps installation instructions. i already have that step done and am still seeing the popup Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.