March 7, 20206 yr Info https://github.com/A75G/docker-templates/blob/master/README.md Template Issues (Cant guarantee anything but will try my best) https://github.com/A75G/docker-templates/issues/new/choose If you find an issue in the template or missing notes require you can request pull request in Github and i will review it approve it appropriately. Just heads up i dont make the application i make template which make it eaiser for normal user to use in Unraid. I will try my best to update templates when i can but i would appreciate if you guys/gals would help a bit since it is too much for one person. Edited July 16, 20232 yr by A75G Edit
March 7, 20206 yr Author Common Questions and Issues https://github.com/A75G/docker-templates/blob/master/README.md Edited April 9, 20206 yr by A75G
March 11, 20206 yr Hi! Thank you for your work! Is there a way to update CyberChef? The version deployed by the container is 9.11.11 while the latest is 9.16.2 https://github.com/gchq/CyberChef/releases Thanks! Edited March 11, 20206 yr by wblondel
March 11, 20206 yr Author 13 minutes ago, wblondel said: Hi! Thank you for your work! Is there a way to update CyberChef? The version deployed by the container is 9.11.11 while the latest is 9.16.2 https://github.com/gchq/CyberChef/releases Thanks! Surething im switching repos with someone who have the update Should be up few hours The new repo is https://hub.docker.com/r/aude/cyberchef/
March 13, 20206 yr Re Homer docker Installed OK, used port 8110, web UI gives me http 413 Request Entity Too Large Nothing in logs. Any ideas?
March 13, 20206 yr Author 8 hours ago, dukiethecorgi said: Re Homer docker Installed OK, used port 8110, web UI gives me http 413 Request Entity Too Large Nothing in logs. Any ideas? Did you try different browser or clear the cookies Try reinstall if it still have the issue make sure the default config is there
March 18, 20206 yr I Setup nextcloud with Onlyoffice for this purpose, and have sub-domains pointing through with Letsencrypt, however my family rarely uses anything else in nextcloud except file storage and remote editing of excel files. (which can be done with the onlyoffice app).. Is FileRun a smaller/better alternative for this usecase? And has anyone migrated their nextcloud database to FileRun sucessfully?
March 18, 20206 yr Author 5 hours ago, Ectropian said: I Setup nextcloud with Onlyoffice for this purpose, and have sub-domains pointing through with Letsencrypt, however my family rarely uses anything else in nextcloud except file storage and remote editing of excel files. (which can be done with the onlyoffice app).. Is FileRun a smaller/better alternative for this usecase? And has anyone migrated their nextcloud database to FileRun sucessfully? For me i prefer Nextcloud open-source and free, from what i can see FileRun is not free completely don't quote me in that I removed the template right now it need further testing somethings dont work.
March 18, 20206 yr 13 hours ago, A75G said: For me i prefer Nextcloud open-source and free, from what i can see FileRun is not free completely don't quote me in that I removed the template right now it need further testing somethings dont work. Good to know.. thanks!
March 29, 20206 yr Dont know if this is just me or not, but I can't use DashMachine at all since the recent update. I just get an "Unauthorized" page when I try to open the site. Tried completely wiping and restarting but still got the same, Firefox and Edge. Sucks, just got it setup with icons and everything.
March 29, 20206 yr Author 13 minutes ago, ShinseiTom said: Dont know if this is just me or not, but I can't use DashMachine at all since the recent update. I just get an "Unauthorized" page when I try to open the site. Tried completely wiping and restarting but still got the same, Firefox and Edge. Sucks, just got it setup with icons and everything. they updated it to 0.5 https://www.reddit.com/r/DashMachine/comments/fqk8gl/version_05/ all you have to do is add "http://dashmachine/login" add /login at the end and it will work
March 29, 20206 yr Hi, I'm using droppy. Everything works fine, except I'd like to hide some system folders present in my share (starting with a dot). It's possible to do that? Otherwise, could you confirm once I've set TLS, it's safe to open droppy port on the Internet?
March 29, 20206 yr 16 hours ago, A75G said: they updated it to 0.5 https://www.reddit.com/r/DashMachine/comments/fqk8gl/version_05/ all you have to do is add "http://dashmachine/login" add /login at the end and it will work Thanks, I was on 0.5, that was the update that killed it. At the time I posted, that reddit response wasn't quite there yet, must have been off by mere minutes based on timestamps! However, it's been updated again and now has a button to redirect to the login page on that unauthorized page! I hoped it would get fixed pretty fast. Now I need to check if my homescreen user problems are fixed.
March 29, 20206 yr Author 5 hours ago, jfrere said: Hi, I'm using droppy. Everything works fine, except I'd like to hide some system folders present in my share (starting with a dot). It's possible to do that? Otherwise, could you confirm once I've set TLS, it's safe to open droppy port on the Internet? I'm not sure about hiding folders i don't use it much, opening port is always not safe but if your careful should be safe enough i cant guarantee anything. Tips for opening things on the internet use reverse proxy if you have lot of services you want to host, use authentication on top of service authentication like Oauth2, i will always recommend using vpn to home then opening service ports.
March 30, 20206 yr So I just pulled down the Dashmachine docker and the admin:adminadmin login:password isn't working. It is just admin:admin Edited March 30, 20206 yr by tknx
March 30, 20206 yr Author 4 hours ago, tknx said: So I just pulled down the Dashmachine docker and the admin:adminadmin login:password isn't working. It is just admin:admin They changed it on the last release was few days ago
March 31, 20206 yr I'm trying to setup Mailpile and I received this error about not being able to sign in to Google because the app isn't verified. As you can see there is no Advanced option that would allow me to go around it. Is there a workaround for this?
March 31, 20206 yr Author 13 hours ago, Blairwin said: I'm trying to setup Mailpile and I received this error about not being able to sign in to Google because the app isn't verified. As you can see there is no Advanced option that would allow me to go around it. Is there a workaround for this? Yeah it seems people have this issue with google account signing in with Oauth, did you try signing with IMAP/SMTP
April 1, 20206 yr 8 hours ago, A75G said: Yeah it seems people have this issue with google account signing in with Oauth, did you try signing with IMAP/SMTP I changed authentication method from Oauth2 to Password for sending/receiving mail and now it's showing me invalid username/password. Sending mail is SMTP/TLS and Receiving is IMAP/TLS
April 1, 20206 yr Author 1 hour ago, Blairwin said: I changed authentication method from Oauth2 to Password for sending/receiving mail and now it's showing me invalid username/password. Sending mail is SMTP/TLS and Receiving is IMAP/TLS did you use Application password or your default password? https://support.google.com/accounts/answer/185833?hl=en
April 1, 20206 yr 9 minutes ago, A75G said: did you use Application password or your default password? https://support.google.com/accounts/answer/185833?hl=en I'm using my default google password. From my understanding I don't need an app password since I don't have MFA setup.
April 1, 20206 yr Author 46 minutes ago, Blairwin said: I'm using my default google password. From my understanding I don't need an app password since I don't have MFA setup. https://community.mailpile.is/t/logging-on-to-gmail-accounts-this-app-isnt-verified/204/18 Seems Turning off less secure app might help. that's all i can find for the problem you face.
April 1, 20206 yr 6 minutes ago, A75G said: https://community.mailpile.is/t/logging-on-to-gmail-accounts-this-app-isnt-verified/204/18 Seems Turning off less secure app might help. that's all i can find for the problem you face. I already have that turned off due to another config I have setup, had to turn it off to get it working. Yea honestly not sure where to go from here maybe i'll post on their community site for help.
April 1, 20206 yr Author 42 minutes ago, PSYCHOPATHiO said: @A75G Thnak you for the matrix docker Happy to help, only wish i know how to configure it bit complex.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.