limetech Posted September 18, 2012 Share Posted September 18, 2012 Download | Release Notes Please post issues in the unRAID OS 5.0-rc Board EDIT: download link now points to -rc8a This is a "roll up" release, that incorporates all the changes from -rc5, -rc6, -rc6-xxx, -rc7, and using the latest 3.4.x series kernel (3.4.11) that includes fixes for mpt2sas disk spin up/down issue. What's left for 5.0 "final"? Basically some bug fixed and a Plugin Manager. However... We are about to announce (finally) a new server product. This is a 3U rack mount server with a semi-custom designed chassis made for us by iStar. This server has been designed for low power and low noise (though not silent). It includes 80+ "bronze" and "gold" power supply options and incorporates 4-pin chassis fans that can be thermally controlled - most of the time they are spinning slow for low noise. In addition, the chassis is 19" deep in order to fit into many AV racks. The 'standard' configuration includes 10 tray-less "warm swap" 3.5" drive bays (warm swap means you can add/remove drives with power on, but with array Stopped). As an option you can order the unit with an additional 4 "warm swap" 2.5" drive bays. To support additional features of this server, some changes are being made in the software: - multiple arrays - multiple ethernet ports - additional file systems More later.... Link to comment
generalz Posted September 18, 2012 Share Posted September 18, 2012 woo, thanks can't wait to try it. Link to comment
tyrindor Posted September 18, 2012 Share Posted September 18, 2012 Seems to be working, only problem is the same as the last RC (and the test builds) and that's parity sync is a lot slower than earlier 5.0 builds and 4.7. Tunable (md_sync_window) is set to 512 as you suggested. Parity build = 90MB/s to 110MB/s Parity sync = 40MB/s to 65MB/s (this is way too slow, ~24 hour parity syncs every month, if anything sync should be faster than a build) If I downgrade to B12a, I get much faster speeds but then I get SAS2LP errors. I'll keep using RC8 but I hope this is fixable. Link to comment
pantner Posted September 18, 2012 Share Posted September 18, 2012 awesome, when i get a replacement USB drive to boot my UnRaid off, i'll whack this on! (Thanks again Tom!) Link to comment
generalz Posted September 18, 2012 Share Posted September 18, 2012 Also seems to be working on hardware that was not previously working. I was getting cpu stalls on array start, the array now starts on its own. Separate non-related issue, as of last night I have a drive that's failing. Link to comment
Dephcon Posted September 18, 2012 Share Posted September 18, 2012 Awesome! I just moved back to b14 from RC5 tonight due to IRQ issues but I'll give RC8 a shot. Link to comment
JonathanM Posted September 18, 2012 Share Posted September 18, 2012 However... We are about to announce (finally) a new server product. This is a 3U rack mount server with a semi-custom designed chassis made for us by iStar. This server has been designed for low power and low noise (though not silent). It includes 80+ "bronze" and "gold" power supply options and incorporates 4-pin chassis fans that can be thermally controlled - most of the time they are spinning slow for low noise. In addition, the chassis is 19" deep in order to fit into many AV racks. The 'standard' configuration includes 10 tray-less "warm swap" 3.5" drive bays (warm swap means you can add/remove drives with power on, but with array Stopped). As an option you can order the unit with an additional 4 "warm swap" 2.5" drive bays. Which motherboard and controller cards are you standardizing on for this iteration? Link to comment
Dephcon Posted September 18, 2012 Share Posted September 18, 2012 So what's the deal with RC6+ and realtek onboard NICs? The 8111DL doesn't seem to like these newer builds and is not detected. Link to comment
madburg Posted September 18, 2012 Share Posted September 18, 2012 Tom, you mention RC7, where is that release located. Dont see an announcement for it? Where no other posted bugs fixed, that were posted in the 5.0-rc board? Don't see any meantion to them in the release notes. Question on "To support additional features of this server, some changes are being made in the software:", does that mean only that hardware will come with the additional software changes, or included for all in RC8 to try out? Link to comment
seanant Posted September 18, 2012 Share Posted September 18, 2012 Are multiple arrays available in rc8? What additional file systems? Link to comment
limetech Posted September 18, 2012 Author Share Posted September 18, 2012 Seems to be working, only problem is the same as the last RC (and the test builds) and that's parity sync is a lot slower than earlier 5.0 builds and 4.7. Tunable (md_sync_window) is set to 512 as you suggested. Parity build = 90MB/s to 110MB/s Parity sync = 40MB/s to 65MB/s (this is way too slow, ~24 hour parity syncs every month, if anything sync should be faster than a build) If I downgrade to B12a, I get much faster speeds but then I get SAS2LP errors. I'll keep using RC8 but I hope this is fixable. Do you mean "Parity check" is slower? (Parity sync to me is same thing as parity build.) What's your h/w config? Link to comment
limetech Posted September 18, 2012 Author Share Posted September 18, 2012 So what's the deal with RC6+ and realtek onboard NICs? The 8111DL doesn't seem to like these newer builds and is not detected. Try upcoming -rc8a. For some reason r8168 didn't get into the system image, don't know wtf happened... Link to comment
peter_sm Posted September 18, 2012 Share Posted September 18, 2012 @Tom, can we see update of following part in the next build? Netatalk to version 3.0 Samba to version 3.6.8 //Peter Link to comment
whiteatom Posted September 18, 2012 Share Posted September 18, 2012 Multiple arrays - yeah! I'm looking forward to being able to have a backup of my media in the same box Is this a few weeks away? Or are we talking next year? Should I order another parity drive yet? Going to try rc8 when I get home tonight. Whiteatom Link to comment
prostuff1 Posted September 18, 2012 Share Posted September 18, 2012 Multiple arrays - yeah! I'm looking forward to being able to have a backup of my media in the same box Is this a few weeks away? Or are we talking next year? Should I order another parity drive yet? Going to try rc8 when I get home tonight. Whiteatom I hope that feature waits for 5.1 So far as I am concerned we need to squash bugs in 5.0 and then call it final. Stop adding more features. We need to leave the plugin manager and multi-array stuff for 5.1 Link to comment
dalben Posted September 18, 2012 Share Posted September 18, 2012 I hope that feature waits for 5.1 So far as I am concerned we need to squash bugs in 5.0 and then call it final. Stop adding more features. We need to leave the plugin manager and multi-array stuff for 5.1 Agree. Though I'd love to see a plugin manager with the 5.0 final I think we just need a barebones stable build to make 5.0 live. Link to comment
ironicbadger Posted September 18, 2012 Share Posted September 18, 2012 I hope that feature waits for 5.1 So far as I am concerned we need to squash bugs in 5.0 and then call it final. Stop adding more features. We need to leave the plugin manager and multi-array stuff for 5.1 +1 this. 5.0 stable release. 5.1 = additional features. Link to comment
whiteatom Posted September 18, 2012 Share Posted September 18, 2012 It sounds like with the MV8 issue resolved there aren't going to be many more changes to 5.0. You all know as well as I do that the name of the thing isn't going to make any difference. If you are happy with the stability of the 5.0rc's as I am, then run it and don't worry about the name - I'm happy to call this one 5.0 final in my head if I don't see any controller errors. There are going to be bug fixes and changes regardless of if this current release was called 5.0-final or 5.0-rc8a. I agree that it would be nice for all the 4.7 people to see something with "final" on it, but in practice, it's just a name. I'm looking forward to multiple arrays regardless of what the version is called. Look at Plex (version 0.9 for the last 20 odd releases) or SB (alpha even thought it's pretty much perfect now); all of these are stable enough for our home use, even if they aren't called final. I promise I'm not just stirring the pot... but people seem to get so caught up in the versioning when really its about functionality. Anyway, my $0.02. Thanks for showing us some major progress Tom whiteatom Link to comment
Joe L. Posted September 18, 2012 Share Posted September 18, 2012 We need to leave the plugin manager and multi-array stuff for 5.1 I 1000% agree. That is a great roadmap for 5.1 (for the plugin-manager) and 5.2 (for multi-array), leaving the kernel and network drivers the same as 5.0-final. In any case, I loaded this rc8 release on my C2SEE based server, rebooted, and lost connectivity with it. (currently running headless, will have to connect a monitor to see why... Possibly the missing network driver??) Joe L. Edit: to correct release I had loaded. (it was rc8) Link to comment
pras1011 Posted September 18, 2012 Share Posted September 18, 2012 Joe are you sure you installed 8a as 8 had the Ethernet driver issue? Link to comment
Joe L. Posted September 18, 2012 Share Posted September 18, 2012 Joe are you sure you installed 8a as 8 had the Ethernet driver issue? No, I installed rc8 last night. I could not connect once I rebooted, but I left the server run overnight. I now need to take the server apart later to get to the flash drive to load 8a. (it is mounted internally) It is not as bad as it seems, as the C2SEE based server is a backup of my older server. (which is still online) Joe L. Link to comment
Glo8al Posted September 18, 2012 Share Posted September 18, 2012 @Tom, can we see update of following part in the next build? Netatalk to version 3.0 Samba to version 3.6.8 //Peter Would also like to see Netatalk V3.0. Plugin manager would be nice but I'm willing to wait for 5.1 to see that. Installed rc8a on a HP N40L. No problems so far. Thx Link to comment
generalz Posted September 18, 2012 Share Posted September 18, 2012 Joe are you sure you installed 8a as 8 had the Ethernet driver issue? No, I installed rc8 last night. I could not connect once I rebooted, but I left the server run overnight. I now need to take the server apart later to get to the flash drive to load 8a. (it is mounted internally) It is not as bad as it seems, as the C2SEE based server is a backup of my older server. (which is still online) Joe L. bah im so lazy id plug another flash drive in and copy it over to /boot and reboot it Link to comment
pras1011 Posted September 18, 2012 Share Posted September 18, 2012 Write speed is still crap! Its about 20MB/s. On RC5 it was about 35MB/s. Link to comment
PeterB Posted September 18, 2012 Share Posted September 18, 2012 I now need to take the server apart later to get to the flash drive to load 8a. If dismantling the server is troublesome, couldn't you boot another usb flash device (external) and copy the 8a files from there? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.