bobbintb Posted May 31, 2017 Share Posted May 31, 2017 On 4/18/2017 at 2:59 AM, DZMM said: I couldn't get in with admin/adminadmin after installing. I just tried again in chrome, but after reading your email I tried in Edge and it worked. I then tried an incognito tab and it worked (sure I did this last time to check) so it's definitely a cookie problem - thanks! I removed and reinstalled the docker. So far I haven't had the problem. Quote Link to comment
johng1290 Posted July 23, 2017 Share Posted July 23, 2017 ad to reinstall open VPN on my UnRaid all of a sudden iOS devices cannot access the internet. Everything else is working fine. It worked before i re-installed it so I doubt its my router Quote Link to comment
EgillSkallagrimsson Posted July 27, 2017 Share Posted July 27, 2017 (edited) I'm having some trouble getting qbittorrent running. It was working fine but we had a power outage and now the it hangs at "*** Running /etc/my_init.d/10_config.sh...Checking if Torrent config exist, if not creating it". I've tried removing the docker and deleting the config directory and it still won't get past that spot. Any help would be appreciated. edit: Well deleting /etc/my_init.d/10_config.sh (appeared to just be a config file check) out of the container got it to run again. Would like a solution that survives a docker upgrade though...... Edited July 27, 2017 by EgillSkallagrimsson update Quote Link to comment
NewDisplayName Posted December 20, 2017 Share Posted December 20, 2017 Hi, could you please disable mail if i disable mail? I disabled it and still i get: Dec 20 00:20:01 1e39b5376f82 /USR/SBIN/CRON[3010]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp)Dec 20 00:40:01 1e39b5376f82 /USR/SBIN/CRON[3026]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp)Dec 20 01:00:01 1e39b5376f82 /USR/SBIN/CRON[3042]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Quote Link to comment
macester Posted February 16, 2018 Author Share Posted February 16, 2018 On 12/20/2017 at 10:43 AM, nuhll said: Hi, could you please disable mail if i disable mail? I disabled it and still i get: Dec 20 00:20:01 1e39b5376f82 /USR/SBIN/CRON[3010]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp)Dec 20 00:40:01 1e39b5376f82 /USR/SBIN/CRON[3026]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp)Dec 20 01:00:01 1e39b5376f82 /USR/SBIN/CRON[3042]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Haven´t checket in here for along time sorry(work, life and not beeing on unraid). This should just be a "false/positive" since sendmail is installed, the messages you see would normaly go to the root user (but could prly fix it if the log is bothering ppl ) Quote Link to comment
macester Posted February 16, 2018 Author Share Posted February 16, 2018 On 7/27/2017 at 6:58 PM, EgillSkallagrimsson said: I'm having some trouble getting qbittorrent running. It was working fine but we had a power outage and now the it hangs at "*** Running /etc/my_init.d/10_config.sh...Checking if Torrent config exist, if not creating it". I've tried removing the docker and deleting the config directory and it still won't get past that spot. Any help would be appreciated. edit: Well deleting /etc/my_init.d/10_config.sh (appeared to just be a config file check) out of the container got it to run again. Would like a solution that survives a docker upgrade though...... Dont use qbit myself, if you still use? it i can build a new one. Quote Link to comment
macester Posted February 16, 2018 Author Share Posted February 16, 2018 On 7/23/2017 at 10:48 PM, johng1290 said: ad to reinstall open VPN on my UnRaid all of a sudden iOS devices cannot access the internet. Everything else is working fine. It worked before i re-installed it so I doubt its my router Dont know if its till a problem? but he latest docker i did work on all platforms i tested it on? but (dosent play nice with kvm/docker on the same bridge witch macvlan something brakes not much I can do, packages get stuck in limbo(works with OVS so kernel/package related ) ) Quote Link to comment
Taddeusz Posted May 14, 2018 Share Posted May 14, 2018 I just got an email from Cloudflare saying that on June 4, 2018 their v1 API is going to be retired in favor of v4. That a client using my API key is using the v1 API. Will the Cloudflare Docker be updated to use the new API? Quote Link to comment
Taddeusz Posted May 15, 2018 Share Posted May 15, 2018 Looks like I should write my own Cloudflare docker as it appears that this one will never be updated. Quote Link to comment
aptalca Posted May 16, 2018 Share Posted May 16, 2018 10 hours ago, Taddeusz said: Looks like I should write my own Cloudflare docker as it appears that this one will never be updated. Doesn't the ddclient image handle cloudflare? There is a linuxserver one I believe Quote Link to comment
Taddeusz Posted May 16, 2018 Share Posted May 16, 2018 11 hours ago, aptalca said: Doesn't the ddclient image handle cloudflare? There is a linuxserver one I believe Not sure about ddclient but I figured out how to add a script to my router to do the same thing, and it uses their v4 API. Quote Link to comment
Drider Posted July 5, 2018 Share Posted July 5, 2018 On 5/16/2018 at 10:31 AM, Taddeusz said: Not sure about ddclient but I figured out how to add a script to my router to do the same thing, and it uses their v4 API. Just found the my DDClient is failing to update cloudflare today. You wouldn't happen to be using DD-WRT, and if so provide some guidance on the script your using? Quote Link to comment
Taddeusz Posted July 5, 2018 Share Posted July 5, 2018 3 minutes ago, Drider said: Just found the my DDClient is failing to update cloudflare today. You wouldn't happen to be using DD-WRT, and if so provide some guidance on the script your using? I’m using ASUSWRT Merlin so I’m not sure this will work for you, but this is what I use. https://gist.github.com/dd-han/09853f07efdf67f0f4af3f7531ac7abf Quote Link to comment
Drider Posted July 5, 2018 Share Posted July 5, 2018 23 hours ago, Taddeusz said: I’m using ASUSWRT Merlin so I’m not sure this will work for you, but this is what I use. https://gist.github.com/dd-han/09853f07efdf67f0f4af3f7531ac7abf I actually have a Merlin flashed ASUS router on the network, so this should work. Thanks! Quote Link to comment
vurt Posted November 30, 2018 Share Posted November 30, 2018 How do I check if the DDClient is updating Cloudflare? I set it up for email but I haven't receive any. Quote Link to comment
NewDisplayName Posted November 30, 2018 Share Posted November 30, 2018 Im also interestedd in using ddclient for that, but couldnt figure out how. Or it doesnt seem to have worked. Quote Link to comment
vurt Posted November 30, 2018 Share Posted November 30, 2018 9 minutes ago, nuhll said: Im also interestedd in using ddclient for that, but couldnt figure out how. Or it doesnt seem to have worked. I suspect this docker no longer works if it hasn't been updated, due to CloudFlare's API change. I'm trying out linuxserver's ddclient but I haven't got it to work yet. Quote Link to comment
vurt Posted December 1, 2018 Share Posted December 1, 2018 18 hours ago, nuhll said: Im also interestedd in using ddclient for that, but couldnt figure out how. Or it doesnt seem to have worked. This seems to be working for me, give it a try. Only for CloudFlare. Quote Link to comment
NewDisplayName Posted December 1, 2018 Share Posted December 1, 2018 (edited) Thanks will be saving this until i need it. (currently normal ddns works - but at some point i will move all my websites to unraid, locally) Edited December 1, 2018 by nuhll Quote Link to comment
Coolsaber57 Posted December 19, 2018 Share Posted December 19, 2018 I can't tell if DDClient is actually working in my case. I don't see any errors in the log, but when I use the Console option to see the DDclient status, I get: # ddclient status WARNING: file /etc/ddclient/ddclient.conf: Cannot open file '/etc/ddclient/ddclient.conf'. (No such file or directory) stat() on closed filehandle FD at /usr/sbin/ddclient line 1066. Use of uninitialized value $mode in bitwise and (&) at /usr/sbin/ddclient line 1067. readline() on closed filehandle FD at /usr/sbin/ddclient line 1079. WARNING: file /etc/ddclient/ddclient.conf: Cannot open file '/etc/ddclient/ddclient.conf'. (No such file or directory) stat() on closed filehandle FD at /usr/sbin/ddclient line 1066. Use of uninitialized value $mode in bitwise and (&) at /usr/sbin/ddclient line 1067. readline() on closed filehandle FD at /usr/sbin/ddclient line 1079. Is that normal? Is there some kind of issue with the ddclient.conf? FWIW, i'm trying to update my Google Domains IP (I removed a bunch of stuff I'll never use): ## Google Domains (www.google.com/domains) ## protocol=googledomains, login=mylogininfo, password=mypwdfromsyntheticrecord, my.tld, Quote Link to comment
jbrown705 Posted January 22, 2019 Share Posted January 22, 2019 On 5/15/2018 at 10:57 PM, aptalca said: Doesn't the ddclient image handle cloudflare? There is a linuxserver one I believe @aptalca you mentioned that linuxserver has one and I can find it in CA under the "others" sections that hasn't been fully made compatible with unraid. Do you know if it is still being worked on or if there is any support for it? I just moved to Cloudflare and can't find a ddns updater that works with cloudflare. It appears this one is may no longer be supported. Quote Link to comment
aptalca Posted January 23, 2019 Share Posted January 23, 2019 2 hours ago, jbrown705 said: @aptalca you mentioned that linuxserver has one and I can find it in CA under the "others" sections that hasn't been fully made compatible with unraid. Do you know if it is still being worked on or if there is any support for it? I just moved to Cloudflare and can't find a ddns updater that works with cloudflare. It appears this one is may no longer be supported. Perhaps we didn't make an unraid template, not sure. In any case, you can create your own template for it. It's a very simple one: https://github.com/linuxserver/docker-ddclient 1 Quote Link to comment
jbrown705 Posted January 23, 2019 Share Posted January 23, 2019 (edited) 1 hour ago, aptalca said: Perhaps we didn't make an unraid template, not sure. In any case, you can create your own template for it. It's a very simple one: https://github.com/linuxserver/docker-ddclient Thanks! I have never created a template before, know of a good walkthru resource so i can try it? Edited January 23, 2019 by jbrown705 Quote Link to comment
Squid Posted January 23, 2019 Share Posted January 23, 2019 (edited) 3 minutes ago, jbrown705 said: Thanks! I have never created a template before, know of a good walkthru resource so i can try it? https://forums.unraid.net/topic/57181-real-docker-faq/?page=2&tab=comments#comment-566095 Although, as an aside, a new Cloudfare DDNS app was added to the Apps tab a couple of days ago. Edited January 23, 2019 by Squid 1 Quote Link to comment
vurt Posted January 23, 2019 Share Posted January 23, 2019 3 hours ago, jbrown705 said: @aptalca you mentioned that linuxserver has one and I can find it in CA under the "others" sections that hasn't been fully made compatible with unraid. Do you know if it is still being worked on or if there is any support for it? I just moved to Cloudflare and can't find a ddns updater that works with cloudflare. It appears this one is may no longer be supported. I posted an alternative in this thread, if DDClient isn't a must. From what I can see, it's been working fine. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.