CattDamon Posted November 8, 2016 Share Posted November 8, 2016 It seems like it will pull the image but not completely install it because after I pull it if I open another tab the container will show up but when I open the webui that's when I get the cannot load this page. So far it only does it on PlexMediaServer containers. Nothing else. Plexpy, grafana, glances, plexrequests, beets, nextcloud. They all work Out of interest, is it only our version of Plex? Surprisingly no. I've tried needo, limetechs, and binhex. All the same issue. I have a feeling my new 10gig connection is the culprit. Quote Link to comment
chip Posted November 8, 2016 Share Posted November 8, 2016 Oops sorry about that - Quote Link to comment
CHBMB Posted November 8, 2016 Share Posted November 8, 2016 It seems like it will pull the image but not completely install it because after I pull it if I open another tab the container will show up but when I open the webui that's when I get the cannot load this page. So far it only does it on PlexMediaServer containers. Nothing else. Plexpy, grafana, glances, plexrequests, beets, nextcloud. They all work Out of interest, is it only our version of Plex? Surprisingly no. I've tried needo, limetechs, and binhex. All the same issue. I have a feeling my new 10gig connection is the culprit. Yeah, I don't think there's anything on our end we can do about this one. Quote Link to comment
Markb Posted November 9, 2016 Share Posted November 9, 2016 Just a quick note for older Roku users, the newest plex (1.2.6.2975) seems to break the audio output on these roku devices. My roku 4 still works but anything below that has issues depending on the audio type. The plex forums say we are going to have to wait until the next release, in the meantime some people have rolled back. I have to ask how this would be done, could I simply put ver 1.1.4 (as an example) in the version variable and it will pull that version and I wont lose my settings, although I wont be too upset to lose setting since I just rebuilt it two days ago. Quote Link to comment
CHBMB Posted November 9, 2016 Share Posted November 9, 2016 Just a quick note for older Roku users, the newest plex (1.2.6.2975) seems to break the audio output on these roku devices. My roku 4 still works but anything below that has issues depending on the audio type. The plex forums say we are going to have to wait until the next release, in the meantime some people have rolled back. I have to ask how this would be done, could I simply put ver 1.1.4 (as an example) in the version variable and it will pull that version and I wont lose my settings, although I wont be too upset to lose setting since I just rebuilt it two days ago. https://github.com/linuxserver/docker-plex#setting-up-the-application Quote Link to comment
interwebtech Posted November 9, 2016 Share Posted November 9, 2016 New PMS posted already. I was downgraded for all of 30 minutes. Sent from my Nexus 5X using Tapatalk Quote Link to comment
Markb Posted November 9, 2016 Share Posted November 9, 2016 Thanks for the help. Was about to do the downgrade, the wife asked to watch bad moms with here so I did, now all is fixed.......see kids, procrastination works. Quote Link to comment
interwebtech Posted November 12, 2016 Share Posted November 12, 2016 Thanks for the help. Was about to do the downgrade, the wife asked to watch bad moms with here so I did, now all is fixed.......see kids, procrastination works. I have dropped back to 1.2.5 due to ongoing issues with audio in new Roku Ultra. Quote Link to comment
fantaxp7 Posted November 14, 2016 Share Posted November 14, 2016 Hello, Are there instructions on how to download beta builds of plex? I was interested in trying out their dvr functionality. I believe version numbers can be manually installed? Not sure how to do this. Thanks Quote Link to comment
Leifgg Posted November 14, 2016 Share Posted November 14, 2016 Suggest start reading from here: http://lime-technology.com/forum/index.php?topic=42148.555 Quote Link to comment
fantaxp7 Posted November 14, 2016 Share Posted November 14, 2016 Suggest start reading from here: http://lime-technology.com/forum/index.php?topic=42148.555 Thank you. Quote Link to comment
deuxcolors Posted November 15, 2016 Share Posted November 15, 2016 Hey y'all. I trully doubt this is a container issue, and just a "me" and/or Plex issue, but I figure I'd ask in any case. I've got a lot of videos (generally movie length files) crapping out halfway through. The video just stops and goes back to the selection screen. I thought it was a transcode issue since I had it's folder pointed to /tmp, but I canched it to now point at the cache/ssd but the issue seems to continue. Of course it is possible it is the files, but it is happening with too many files, and the source is trustworthy to the point if the videos were bad they'd be pulled. Thanks for any help getting in the right direction. Quote Link to comment
interwebtech Posted November 15, 2016 Share Posted November 15, 2016 Hey y'all. I trully doubt this is a container issue, and just a "me" and/or Plex issue, but I figure I'd ask in any case. I've got a lot of videos (generally movie length files) crapping out halfway through. The video just stops and goes back to the selection screen. I thought it was a transcode issue since I had it's folder pointed to /tmp, but I canched it to now point at the cache/ssd but the issue seems to continue. Of course it is possible it is the files, but it is happening with too many files, and the source is trustworthy to the point if the videos were bad they'd be pulled. Thanks for any help getting in the right direction. I had a similar issue that I narrowed down to being larger (6 GB+) movie files. Never happened on smaller files like TV episodes. Most of mine are MKV. Also it only happened on my Roku 3. Granted I only watched longer stuff using the Roku so it might have affected others but IDK. Forum searches on both sites turned up Plex pointing finger at Roku firmware version and Roku pointing finger at Plex for transcode errors. I waited for a while with neither camp providing a fix. So I bought new Roku Ultra & Premiere+. These are the new Rokus (a Roku "5" if you will). Installed both (with only settings change being auto-login) and no more pauses or getting kicked out to selection screen. Granted there are other issues these are having (slight delay when starting film where no sound, verified by preamp OSD saying "no audio" and some flashing when switching between resolutions). So my guess is the fix for my issue was either of the following two things or maybe the combination. 1. new Roku hardware 2. default Plex settings on Roku Quote Link to comment
deuxcolors Posted November 15, 2016 Share Posted November 15, 2016 Thanks but I don't have a Roku. And it happens on Plex Home Theater on OSX, Plex Media Center also on OSX, and the Plex.tv webapp. Quote Link to comment
adammerkley Posted November 16, 2016 Share Posted November 16, 2016 Getting a spinning "Looking for servers" and "Get your Plex Media Server" page upon first and all subsequent logins, no matter how many times I restart the docker container. Also, I don't see a Server tab under Settings. Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Getting a spinning "Looking for servers" and "Get your Plex Media Server" page upon first and all subsequent logins, no matter how many times I restart the docker container. Also, I don't see a Server tab under Settings. Can you post your docker run command? Link in my sigs... Quote Link to comment
adammerkley Posted November 16, 2016 Share Posted November 16, 2016 Getting a spinning "Looking for servers" and "Get your Plex Media Server" page upon first and all subsequent logins, no matter how many times I restart the docker container. Also, I don't see a Server tab under Settings. Can you post your docker run command? Link in my sigs... Sure it's: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="plex" --net="host" -e TZ="America/Phoenix" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="latest" -v "/mnt/user/TV":"/media/tv":rw -v "/mnt/user/Movies":"/media/movies":rw -v "/mnt/user/appdata/plex":"/config":rw linuxserver/plex f2cbd54fc7457b4527823fcc0293a12c672abbb1c5d69d356ace69684535800b But I suspect reply 411 upthread will resolve my issue. Turns out you can't successfully pull a Plex taken if accessing over VPN. I'm not at home while I'm trying to do this, so here's hoping Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Getting a spinning "Looking for servers" and "Get your Plex Media Server" page upon first and all subsequent logins, no matter how many times I restart the docker container. Also, I don't see a Server tab under Settings. Can you post your docker run command? Link in my sigs... Sure it's: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="plex" --net="host" -e TZ="America/Phoenix" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="latest" -v "/mnt/user/TV":"/media/tv":rw -v "/mnt/user/Movies":"/media/movies":rw -v "/mnt/user/appdata/plex":"/config":rw linuxserver/plex f2cbd54fc7457b4527823fcc0293a12c672abbb1c5d69d356ace69684535800b But I suspect reply 411 upthread will resolve my issue. Turns out you can't successfully pull a Plex taken if accessing over VPN. I'm not at home while I'm trying to do this, so here's hoping Your docker run command looks fine, so yeah try it not over the VPN.... Quote Link to comment
adammerkley Posted November 16, 2016 Share Posted November 16, 2016 Your docker run command looks fine, so yeah try it not over the VPN.... Going home and getting on the wifi absolutely worked. Plex launched and instantly went in to "server mode" or whatever you would call it. Then as I left, I realized that this may have worked if I had tried going to http://mypublicIP:32400/web I just didn't think of that when I was pulling out my hair last night Quote Link to comment
evocraigst Posted November 21, 2016 Share Posted November 21, 2016 having a slight issue with cammra upload to my beta version of plex , it wont upload no error just does not upload first file not i changed folder location for file upload and it worked and uploaded files but now i can not see the images or video , so not to sure its like no permissions to write to the folder it makes any help will be great i tryed on ios and android ios flickers 13-15% and does nothink Quote Link to comment
Gog Posted November 21, 2016 Share Posted November 21, 2016 having a slight issue with cammra upload to my beta version of plex , it wont upload no error just does not upload first file not i changed folder location for file upload and it worked and uploaded files but now i can not see the images or video , so not to sure its like no permissions to write to the folder it makes any help will be great i tryed on ios and android ios flickers 13-15% and does nothink This may not be a docker issue. Have you tried the Plex forums for help? Sent from my SGH-I337M using Tapatalk Quote Link to comment
nsheth Posted November 23, 2016 Share Posted November 23, 2016 Hello, I'm still new with unraid and docker applications. I installed plex from linuxserver.io repo and everything was working fine, but was not able to enable external access so I stop the plex server, remove it from docker and deleted appdata/plex directory and also appdata/docker/docker.img. Recreate docker.img and install plex and now when I go to plex web console it say server not found. Can someone please help. Thank you :'( Quote Link to comment
CHBMB Posted November 23, 2016 Share Posted November 23, 2016 Hello, I'm still new with unraid and docker applications. I installed plex from linuxserver.io repo and everything was working fine, but was not able to enable external access so I stop the plex server, remove it from docker and deleted appdata/plex directory and also appdata/docker/docker.img. Recreate docker.img and install plex and now when I go to plex web console it say server not found. Can someone please help. Thank you :'( Can you post more information, Unraid version, Docker run command and docker logs. Plus any Plex logs. Docker run and docker logs both can be found by looking at the link in my sig. Plex logs can be found in appdata/plex/Library/Application Support/Plex Media Server/Logs Quote Link to comment
nsheth Posted November 23, 2016 Share Posted November 23, 2016 Thank you but I redoing whole server and want to know if following placement of files is correct: appdata share is set for cache only docker.img file /mnt/cache/appdata/docker.img plex docker /mnt/user/appdata/docker/ What about system share currently by default is set to use all disk. please advice proper locations if I am doing correctly. Thanks, Quote Link to comment
CHBMB Posted November 23, 2016 Share Posted November 23, 2016 Thank you but I redoing whole server and want to know if following placement of files is correct: appdata share is set for cache only docker.img file /mnt/cache/appdata/docker.img plex docker /mnt/user/appdata/docker/ What about system share currently by default is set to use all disk. please advice proper locations if I am doing correctly. Thanks, Yes, but this won't necessarily solve your problem. If you deleted the appdata previously and deleted the docker image/container then that's all you need to wipe. The Unraid OS has no bearing on your Plex problem. I think redoing your whole server is unnecessary, Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.