CDLehner Posted January 29, 2016 Share Posted January 29, 2016 See Step 1: Delete your previous image file  May look slightly different than that old post but that's basically the idea.  That's exactly what I did. I set 'enable docker' to No...hit apply; that gave me the check-box, to delete image file...but the delete button, stays greyed-out  OK...I got impatient; so I set docker enabled back to yes, and pointed at the same image file for re-create.  Quote Link to comment
CDLehner Posted January 29, 2016 Share Posted January 29, 2016 OK...so when I went to re-install PLEX; it was "back". Â So this time...when I went to un-install; container and image seemed to work! Â Quote Link to comment
CDLehner Posted January 29, 2016 Share Posted January 29, 2016 Should I try, to re-install the PLEX container now? Quote Link to comment
CHBMB Posted January 29, 2016 Share Posted January 29, 2016 CDLehner, I've just got in after a couple of rough days at work. I'll try and catch up on your issues tomorrow, feel free to install our version of Plex if you wish or Limetechs, but if you do choose to install the Limetech version, would you mind migrating to their support thread? You're sending my notifications mad! lol  As Squid said though, no harm done, and it did give me a chuckle.... Quote Link to comment
CDLehner Posted January 30, 2016 Share Posted January 30, 2016 Well let me ask this: as an obvious noob...which version, "should" I go for? Quote Link to comment
CHBMB Posted January 30, 2016 Share Posted January 30, 2016 There's a thread somewhere about which Plex container to select. I'm afraid I don't have the link to hand and am replying on my phone.  I'm not going to answer the question for two reasons, because firstly each version has fors and againsts as is detailed in the Plex thread I mentioned above and secondly, as a member of linuxserver.io I can't really give you an unbiased opinion in all honesty... and I'm sure you can guess what I'd say.... Quote Link to comment
ljm42 Posted January 30, 2016 Share Posted January 30, 2016 Here's the thread that talks about the differences between the Plex containers: Â https://lime-technology.com/forum/index.php?topic=41562.0 Â Â Quote Link to comment
CDLehner Posted January 30, 2016 Share Posted January 30, 2016 Squid...how do I move this, to the LimeTech PLEX thread? Â I'm also reviewing this https://lime-technology.com/forum/index.php?topic=37732.0 Â [sOLVED]...for now. If I run into trouble again; I'll post at the LimeTech thread. Â Guys...I belong to many forums; you guys are the most helpful, on what is the hardest product! Â Thanks Quote Link to comment
molesza Posted February 3, 2016 Share Posted February 3, 2016 I am having a very strange issue. Â I can access my server remotely but if im on my local network all plex clients cant see the local plex media server installed with this docker. I have searched online and cant find anyone having a similar problem to me. I cant understand why it would work remotely and not locally. Normally it would be the other way round? Has anyone else experienced this issue? Â Thanks Quote Link to comment
GFOviedo Posted February 12, 2016 Share Posted February 12, 2016 So for the past week or so I've been having some issues with Plex buffering a lot lately. This is something that has not happened before in or out of network. The devices having issues are my Vizio and Samsung smart TV's, which have the Plex app. Both connected via wire. I went on to my UnRaid docker and checked for updates, and it stated it had the latest. I forced it to update, and I noticed that the container ID changed.  Then I went to the Plex WebGui, settings, server, and I noticed it states Version 0.9.15.2! An update is available. Please install manually. How do I go about updating manually? Quote Link to comment
Leifgg Posted February 12, 2016 Share Posted February 12, 2016 So for the past week or so I've been having some issues with Plex buffering a lot lately. This is something that has not happened before in or out of network. The devices having issues are my Vizio and Samsung smart TV's, which have the Plex app. Both connected via wire. I went on to my UnRaid docker and checked for updates, and it stated it had the latest. I forced it to update, and I noticed that the container ID changed.  Then I went to the Plex WebGui, settings, server, and I noticed it states Version 0.9.15.2! An update is available. Please install manually. How do I go about updating manually? Restart the container to update. Currently version 0.9.15.3 is the latest PlexPass release. Quote Link to comment
lonix Posted February 12, 2016 Share Posted February 12, 2016  So for the past week or so I've been having some issues with Plex buffering a lot lately. This is something that has not happened before in or out of network. The devices having issues are my Vizio and Samsung smart TV's, which have the Plex app. Both connected via wire. I went on to my UnRaid docker and checked for updates, and it stated it had the latest. I forced it to update, and I noticed that the container ID changed.  Then I went to the Plex WebGui, settings, server, and I noticed it states Version 0.9.15.2! An update is available. Please install manually. How do I go about updating manually? Restart the docker container, it will update automaticly Quote Link to comment
GFOviedo Posted February 13, 2016 Share Posted February 13, 2016 I did re-start and didn't do anything. I even rebooted the server. I'll do it again when I get home tonight. Quote Link to comment
Leifgg Posted February 13, 2016 Share Posted February 13, 2016 I did re-start and didn't do anything. I even rebooted the server. I'll do it again when I get home tonight. Check that you have VERSION set to plexpass You can also try to set VERSION to a specific version to download Quote Link to comment
GFOviedo Posted February 13, 2016 Share Posted February 13, 2016 I did re-start and didn't do anything. I even rebooted the server. I'll do it again when I get home tonight. Check that you have VERSION set to plexpass You can also try to set VERSION to a specific version to download  How do I get to those options? Quote Link to comment
Leifgg Posted February 13, 2016 Share Posted February 13, 2016 I did re-start and didn't do anything. I even rebooted the server. I'll do it again when I get home tonight. Check that you have VERSION set to plexpass You can also try to set VERSION to a specific version to download  How do I get to those options? Edit the container and enable Advanced View. Quote Link to comment
GFOviedo Posted February 14, 2016 Share Posted February 14, 2016 Thanks I was able to input and save those variables, which I never had before. However, it still doesn't update even if I change the version to 0.9.15.3.1674-f46e7e6 and press save. Thereafter, I stop and re-started the docker app. I went to the WebGui / Server and the version still 0.9.15.2. Quote Link to comment
GFOviedo Posted February 14, 2016 Share Posted February 14, 2016 I just realized that I am using the Limtech version of plex, which apparently only updates the public version of Plex. How do I go about switching from Limtech to Linuxserver Plex docker? Quote Link to comment
talmania Posted February 14, 2016 Share Posted February 14, 2016 I just realized that I am using the Limtech version of plex, which apparently only updates the public version of Plex. How do I go about switching from Limtech to Linuxserver Plex docker?  Here you go--  I just ran across this last week as well as I was using another source.  http://lime-technology.com/forum/index.php?topic=41609.msg394769#msg394769  Hope that helps!  EDIT: And I just found my issue as well--for anyone facing a similar issue: there's a VARIABLE you can add (at least for Linuxserver) that states "latest" or "plexpass". I was getting prompted to "install manually" then found the variable under the advanced view of the docker's properties for Plex. Soon as I changed it from latest to plexpass I went from 9.15.2 to 9.15.3  Many thanks to Linuxserver for this repository--MUCH appreciated! Plex has been a huge leap forward for me from the years of using my Dune.    Quote Link to comment
GFOviedo Posted February 15, 2016 Share Posted February 15, 2016 I just realized that I am using the Limtech version of plex, which apparently only updates the public version of Plex. How do I go about switching from Limtech to Linuxserver Plex docker?  Here you go--  I just ran across this last week as well as I was using another source.  http://lime-technology.com/forum/index.php?topic=41609.msg394769#msg394769  Hope that helps!  EDIT: And I just found my issue as well--for anyone facing a similar issue: there's a VARIABLE you can add (at least for Linuxserver) that states "latest" or "plexpass". I was getting prompted to "install manually" then found the variable under the advanced view of the docker's properties for Plex. Soon as I changed it from latest to plexpass I went from 9.15.2 to 9.15.3  Many thanks to Linuxserver for this repository--MUCH appreciated! Plex has been a huge leap forward for me from the years of using my Dune.  Thanks. I will try it out when I get home later tonight. Quote Link to comment
GFOviedo Posted February 16, 2016 Share Posted February 16, 2016 Awesome, I was able to switch to Linux Plex docker and update to the latest Plexpass! Thanks everyone. Quote Link to comment
danmartyn Posted February 19, 2016 Share Posted February 19, 2016 I can't get to the web UI to setup Plex  I'm new to unRaid, so I'm sure I'm missing something simple. I installed this docker from the Community Applications. Set it up to be using plexpass, it installs and sets up properly, but when I click on it in the Dashboard and choose Web UI, it loads a page saying Safari can't connect to the server. It was going to http://192.168.1.110:32400/web. I looked at the URL for my current flex setup on my Mac Mini, and its going to /web/index.html, so I tried changing the Web UI URL to that in advanced settings, so it went to http://192.168.1.110:32400/web/index.html but same issue.  Anyone know what I'm doing wrong? Quote Link to comment
trurl Posted February 19, 2016 Share Posted February 19, 2016 I can't get to the web UI to setup Plex  I'm new to unRaid, so I'm sure I'm missing something simple. I installed this docker from the Community Applications. Set it up to be using plexpass, it installs and sets up properly, but when I click on it in the Dashboard and choose Web UI, it loads a page saying Safari can't connect to the server. It was going to http://192.168.1.110:32400/web. I looked at the URL for my current flex setup on my Mac Mini, and its going to /web/index.html, so I tried changing the Web UI URL to that in advanced settings, so it went to http://192.168.1.110:32400/web/index.html but same issue.  Anyone know what I'm doing wrong? Do you have any other working dockers? Quote Link to comment
danmartyn Posted February 19, 2016 Share Posted February 19, 2016 Do you have any other working dockers? Â I was using the lime tech one this morning, and was able to load the WebUI and add my media, but then I realized it doesn't work with Plex Pass, so I deleted it and did the linuxserver one which does. Quote Link to comment
mr-hexen Posted February 19, 2016 Share Posted February 19, 2016 Wait a bit and try again its probably updating permissions on the config folder. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.