aaronwt Posted September 16, 2015 Share Posted September 16, 2015 I did a parity check recently and it finished this morning around 2AM. I have my spindown timer set for 3 hours so around 5Am all drives spun down. Around 8:40 Am the drives spun up when I was looking at the share. It's now been over ten minutes since the drives spun up and on the main page it still isn't showing any Drive temps. If I go to the dashboard and click on the individual drives, it will show the temps with the SMART info, but the temps are not showing up in the main page. Is this normal behavior? EDIT: The only drive not spin up was the parity drive. When I hit the "SPin UP" button the parity drive did spin up and then all temps showed up on the main page. But I wouldn't think I should need to hit this button for the temps to show up since the 23 data drives were previously spun up. Change Tunable (poll_attributes) (Settings -> Disk Settings) to something like 180 (3 minutes) or 120 (2 minutes) or 60 (1 minute). (See Configuring the Settings -> Disk Settings -> the note about Tunable (poll_attributes)). Thanks. Quote Link to comment
abeksis Posted September 16, 2015 Share Posted September 16, 2015 Error installing via docker Since the upgrade to version 6.1.2 Every time I try to install with a docker I get an error Warning: file_put_contents (/var/lib/docker/unraid-update-status.json): failed to open stream: Read-only file system in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient. php on line 291 Warning: file_put_contents (/var/lib/docker/unraid-update-status.json): failed to open stream: Read-only file system in /usr/local/emhttp/plugins/dynamix.docker.manager/ include / DockerClient.php on line 438 Can anyone help me fix it? my Post diagnostics /config copy all *.cfg files, go file and the super.dat file. These are configuration files. /config/shares copy all *.cfg files. These are user share settings files. Syslog file(s) copy the current syslog file and any previous existing syslog files. System save output of the following commands: lsscsi, lspci, free, lsof, ps, ethtool & ifconfig. display of iommu groups. display of command line parameters (e.g. pcie acs override, pci stubbing, etc). save system variables. SMART reports save a SMART report of each individual disk present in your system. Docker save files docker.log, libvirtd.log and libvirt/qemu/*.log. Quote Link to comment
trurl Posted September 16, 2015 Share Posted September 16, 2015 Go to Tools - Diagnostics and post the zip file Quote Link to comment
abeksis Posted September 16, 2015 Share Posted September 16, 2015 http://www.iphoneil.net/homeserver-diagnostics-20150916-1657.zip Unable to upload file (too big), so I've included a link Quote Link to comment
trurl Posted September 16, 2015 Share Posted September 16, 2015 http://www.iphoneil.net/homeserver-diagnostics-20150916-1657.zip Unable to upload file (too big), so I've included a link Your very large syslog is mostly hack attempts from Hong Kong:Sep 16 06:34:58 HomeServer sshd[8763]: Failed password for root from 43.229.53.78 port 35362 ssh2 Sep 16 06:34:58 HomeServer sshd[8763]: Failed password for root from 43.229.53.78 port 35362 ssh2 Sep 16 06:34:58 HomeServer sshd[8763]: Failed password for root from 43.229.53.78 port 35362 ssh2 Sep 16 06:34:59 HomeServer sshd[8763]: Received disconnect from 43.229.53.78: 11: [preauth] Suggest fixing that before addressing anything else. Quote Link to comment
abeksis Posted September 16, 2015 Share Posted September 16, 2015 Yes, I saw it .. I blocked the entry port to my serve Unraid, what about my problem? You have the option to try to direct me to fix it? Quote Link to comment
trurl Posted September 16, 2015 Share Posted September 16, 2015 Yes, I saw it .. I blocked the entry port to my serve Unraid, what about my problem? You have the option to try to direct me to fix it? On Dashboard, under System Status, where it says "flash : log : docker" what is the percent used for docker, the last number? Quote Link to comment
abeksis Posted September 16, 2015 Share Posted September 16, 2015 Yes, I saw it .. I blocked the entry port to my serve Unraid, what about my problem? You have the option to try to direct me to fix it? On Dashboard, under System Status, where it says "flash : log : docker" what is the percent used for docker, the last number? Quote Link to comment
bonienl Posted September 16, 2015 Share Posted September 16, 2015 Where exactly did you create your docker image file, it looks like file permissions for this file are incorrect. For example I have named my image docker.img and created at the root level of the cache drive. # ls -l /mnt/cache/docker.img -rw-rw-rw- 1 nobody users 21474836480 Sep 16 21:24 /mnt/cache/docker.img Can you telnet into your system and do the above command for your image file? Quote Link to comment
abeksis Posted September 17, 2015 Share Posted September 17, 2015 root@HomeServer:~# ls -l /mnt/user/docker/docker.img -rw-r--r-- 1 nobody users 21474836480 Sep 17 04:46 /mnt/user/docker/docker.img Thanks for the answers, I started all over again, I created a new file Docker.img, then the permissions were normal. Something went wrong for me there is not clear to me why Quote Link to comment
trurl Posted September 17, 2015 Share Posted September 17, 2015 root@HomeServer:~# ls -l /mnt/user/docker/docker.img -rw-r--r-- 1 nobody users 21474836480 Sep 17 04:46 /mnt/user/docker/docker.img Thanks for the answers, I started all over again, I created a new file Docker.img, then the permissions were normal. Something went wrong for me there is not clear to me why I thought there was a requirement for docker img to be created on a disk, not a user share. Quote Link to comment
piotrasd Posted September 18, 2015 Share Posted September 18, 2015 @limetech Please in next release add to kernel enabled FMC module - this is for mezzanine cards which also support SATA/SAS etc controlers some mainboard Supermicro, asrock rack, intel have this port and i already bought LSI controler from intel for this. but unraid dont recognize anything this i need https://www.dropbox.com/s/it9rw83l0tcy8mq/Zrzut%20ekranu%202015-09-18%2003.21.46.png?dl=0 Quote Link to comment
DanielCoffey Posted September 18, 2015 Share Posted September 18, 2015 The best place for that might be Feature Requests, plotrasd. I put in a request for the it87 drivers for my mainboard in there. Quote Link to comment
limetech Posted September 18, 2015 Author Share Posted September 18, 2015 The best place for that might be Feature Requests, plotrasd. I put in a request for the it87 drivers for my mainboard in there. Actually the best way to communicate a linux kernel change request is to drop me an email: [email protected] Sometimes these requests get lost in the sea of other requests there. Quote Link to comment
limetech Posted September 18, 2015 Author Share Posted September 18, 2015 root@HomeServer:~# ls -l /mnt/user/docker/docker.img -rw-r--r-- 1 nobody users 21474836480 Sep 17 04:46 /mnt/user/docker/docker.img Thanks for the answers, I started all over again, I created a new file Docker.img, then the permissions were normal. Something went wrong for me there is not clear to me why I thought there was a requirement for docker img to be created on a disk, not a user share. That used to be the case but prior to 6.0 stable release we lifted that requirement. Quote Link to comment
limetech Posted September 19, 2015 Author Share Posted September 19, 2015 @limetech Please in next release add to kernel enabled FMC module - this is for mezzanine cards which also support SATA/SAS etc controlers some mainboard Supermicro, asrock rack, intel have this port and i already bought LSI controler from intel for this. but unraid dont recognize anything this i need https://www.dropbox.com/s/it9rw83l0tcy8mq/Zrzut%20ekranu%202015-09-18%2003.21.46.png?dl=0 This is added to next release. Quote Link to comment
piotrasd Posted September 20, 2015 Share Posted September 20, 2015 @limetech Please in next release add to kernel enabled FMC module - this is for mezzanine cards which also support SATA/SAS etc controlers some mainboard Supermicro, asrock rack, intel have this port and i already bought LSI controler from intel for this. but unraid dont recognize anything this i need https://www.dropbox.com/s/it9rw83l0tcy8mq/Zrzut%20ekranu%202015-09-18%2003.21.46.png?dl=0 This is added to next release. Big Thanks ! Quote Link to comment
Kir Posted September 20, 2015 Share Posted September 20, 2015 After upgrading to 6.1.2, I noticed these messages in the console window: yes: standard output: Broken pipe yes: write error Quote Link to comment
jonp Posted September 20, 2015 Share Posted September 20, 2015 After upgrading to 6.1.2, I noticed these messages in the console window: yes: standard output: Broken pipe yes: write error Are you experiencing an issue in the use of the system? Can you attach your diagnostics (Tools -> Diagnostics -> Click the Download button). Quote Link to comment
Kir Posted September 21, 2015 Share Posted September 21, 2015 Are you experiencing an issue in the use of the system? Can you attach your diagnostics (Tools -> Diagnostics -> Click the Download button). No issues at all - just these messages in the console, and only there. I'll attach the diags after a clean reboot. Quote Link to comment
jphipps Posted September 21, 2015 Share Posted September 21, 2015 I get the popup window, but then it just says "waiting for {ip address}" and never seems to return. I can see the tail command running in the process list. https://www.dropbox.com/s/7pp8peeq20f5962/Screen%20Shot%202015-09-13%20at%2010.34.17%20AM.png?dl=0 Figured this issue out... I am running Sophos Anti-Virus, and for some reason it thinks the real tine updating of the page is some sort of malicious code and blocks it. Once I whitelisted the ip it is working fine now... Quote Link to comment
maciver Posted November 13, 2015 Share Posted November 13, 2015 when you have boot problems, i suggest to run Memtest. I had some crazy problems, now with the fixed boot files and a new set of Kingston ram everything is running extremly stable. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.