DZMM Posted March 2, 2019 Share Posted March 2, 2019 On 2/28/2019 at 2:27 PM, Weavus said: Thanks for the info. Any advice on which cipher I should be using going forward or best to leave it blank until RC4-MD5 is restored? I'm getting no transfer at all even after removing RC4-MD5 😞 Quote Link to comment
DZMM Posted March 2, 2019 Share Posted March 2, 2019 On 2/28/2019 at 2:44 PM, nuhll said: How fast is your internet? I've got gigabit now. I sorted this in the end, but I'm getting no transfer this week at all - trying to fix now as I've been away Quote Link to comment
NewDisplayName Posted March 4, 2019 Share Posted March 4, 2019 On 3/3/2019 at 12:01 AM, DZMM said: I've got gigabit now. I sorted this in the end, but I'm getting no transfer this week at all - trying to fix now as I've been away Ill be getting gigabit in a few month too... did you need to change anything to get full speed? Cables, switches and so on? Whats your max at speedtest.net? Quote Link to comment
DZMM Posted March 4, 2019 Share Posted March 4, 2019 37 minutes ago, nuhll said: Ill be getting gigabit in a few month too... did you need to change anything to get full speed? Cables, switches and so on? Whats your max at speedtest.net? I'm with gigaclear in the UK and I can pretty much saturate it when the demand's there - e.g. I'm uploading to google now at a constant 70MB/s as I've capped it and my downloads are running at between 60-80MB/s - earlier today I saw transmission hitting 100MB/s, with nzbget and other stuff running at the same time. I just have a gigabit nic on my pfsense VM with 3 cores allocated - max CPU utilisation I've seen is about 60%, although I turned off snort as it was causing problems and haven't got around to putting it back on yet. I haven't gone 10G network yet as I only have my unRAID server together with STBs and home automation stuff, so my 'bottleneck' is my internet so until that goes over 1Gbps I don't really need 10Gbps. Quote Link to comment
NewDisplayName Posted March 4, 2019 Share Posted March 4, 2019 2 hours ago, DZMM said: I'm with gigaclear in the UK and I can pretty much saturate it when the demand's there - e.g. I'm uploading to google now at a constant 70MB/s as I've capped it and my downloads are running at between 60-80MB/s - earlier today I saw transmission hitting 100MB/s, with nzbget and other stuff running at the same time. I just have a gigabit nic on my pfsense VM with 3 cores allocated - max CPU utilisation I've seen is about 60%, although I turned off snort as it was causing problems and haven't got around to putting it back on yet. I haven't gone 10G network yet as I only have my unRAID server together with STBs and home automation stuff, so my 'bottleneck' is my internet so until that goes over 1Gbps I don't really need 10Gbps. So 100mb/s would be around 800mbits "only"? What you get on speedtest.net? I was thinking about upgrading to cat8 and 10gbits. I dont want my lan throttle the wan.. Quote Link to comment
DZMM Posted March 4, 2019 Share Posted March 4, 2019 7 hours ago, nuhll said: So 100mb/s would be around 800mbits "only"? What you get on speedtest.net Yes, I had other stuff going at the same time. Speedtests were close to a gig and I can consistently get over 900Mbps up and down at the same time. Quote Link to comment
NewDisplayName Posted March 7, 2019 Share Posted March 7, 2019 On 3/4/2019 at 9:40 PM, DZMM said: Yes, I had other stuff going at the same time. Speedtests were close to a gig and I can consistently get over 900Mbps up and down at the same time. I guess thats okay, if you count in overhead. What cables u have? cat6? Quote Link to comment
DZMM Posted March 7, 2019 Share Posted March 7, 2019 3 hours ago, nuhll said: I guess thats okay, if you count in overhead. What cables u have? cat6? yep cat6. I've just bought a new place and I'm hopefully getting cat6a - I've asked for a quote for both Quote Link to comment
NewDisplayName Posted March 7, 2019 Share Posted March 7, 2019 (edited) 1 minute ago, DZMM said: yep cat6. I've just bought a new place and I'm hopefully getting cat6a - I've asked for a quote for both I would go for cat8 if u make it new. Cat8 is the next fast standard for rj45 plugs. Up to 30gbits. Edited March 7, 2019 by nuhll Quote Link to comment
dheg Posted March 7, 2019 Share Posted March 7, 2019 I recently moved from SAB to nzbget and the only feature I'm missing is notifications. Found a script to send pushover notifications, but it does not work. Aparently it needs phyton for the script to work. Is it installed? Could it be easily added? Quote Link to comment
mgladwin Posted March 23, 2019 Share Posted March 23, 2019 (edited) Hey all, just started getting this error in NZBGet, nothing has changed as far as config is concerned and a container restart wont fix it. Ive checked permissions while ssh'ed into the container and all seems OK. Not sure what to look at next?? EDIT: So last week I had a disk fill up and NZBGet couldn't write to the disk due to no space left. I have now given all disks some more space but maybe NZBGet hasn't seen this or something? I used Unbalance plugin to move some files from the full disk to one that had some space left on it. Edited March 23, 2019 by mgladwin added more info Quote Link to comment
trurl Posted March 23, 2019 Share Posted March 23, 2019 6 hours ago, mgladwin said: Hey all, just started getting this error in NZBGet, nothing has changed as far as config is concerned and a container restart wont fix it. Ive checked permissions while ssh'ed into the container and all seems OK. Not sure what to look at next?? EDIT: So last week I had a disk fill up and NZBGet couldn't write to the disk due to no space left. I have now given all disks some more space but maybe NZBGet hasn't seen this or something? I used Unbalance plugin to move some files from the full disk to one that had some space left on it. Post your diagnostics and docker run command. https://forums.unraid.net/topic/37579-need-help-read-me-first/ https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 Quote Link to comment
mgladwin Posted March 23, 2019 Share Posted March 23, 2019 10 hours ago, trurl said: Post your diagnostics and docker run command. https://forums.unraid.net/topic/37579-need-help-read-me-first/ https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='NZBGet' --net='bridge' -e TZ="Australia/Adelaide" -e HOST_OS="Unraid" -e 'PUID'='99' -e 'PGID'='100' -p '6789:6789/tcp' -v '/mnt/cache/appdata/nzbget/':'/config':'rw' -v '/mnt/user/MEDIA/DOWNLOADS/':'/downloads':'rw' -v '/mnt/cache/appdata/nzbget/ppscripts':'/scripts':'rw' -v '/mnt/user/MEDIA/DOWNLOADS/completed/music/':'/music-downloads':'rw' 'linuxserver/nzbget' tower-diagnostics-20190324-0749.zip Quote Link to comment
Squid Posted March 23, 2019 Share Posted March 23, 2019 4 minutes ago, mgladwin said: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='NZBGet' --net='bridge' -e TZ="Australia/Adelaide" -e HOST_OS="Unraid" -e 'PUID'='99' -e 'PGID'='100' -p '6789:6789/tcp' -v '/mnt/cache/appdata/nzbget/':'/config':'rw' -v '/mnt/user/MEDIA/DOWNLOADS/':'/downloads':'rw' -v '/mnt/cache/appdata/nzbget/ppscripts':'/scripts':'rw' -v '/mnt/user/MEDIA/DOWNLOADS/completed/music/':'/music-downloads':'rw' 'linuxserver/nzbget' tower-diagnostics-20190324-0749.zip Your cache drive is fully allocated Device size: 111.79GiB Device allocated: 111.79GiB Device unallocated: 56.00KiB (as an aside, I'm not a fan of btrfs for cache drives if you don't have a cache pool) To fix: https://forums.unraid.net/topic/62230-out-of-space-errors-on-cache-drive/?tab=comments#comment-610551 Quote Link to comment
mgladwin Posted March 23, 2019 Share Posted March 23, 2019 (edited) 2 hours ago, Squid said: Your cache drive is fully allocated Device size: 111.79GiB Device allocated: 111.79GiB Device unallocated: 56.00KiB (as an aside, I'm not a fan of btrfs for cache drives if you don't have a cache pool) To fix: https://forums.unraid.net/topic/62230-out-of-space-errors-on-cache-drive/?tab=comments#comment-610551 Thanks Squid. Didn't even know this was a thing. Running the balance command now and will report back if i have any further issues. Thanks for the tip about btrfs as well. @SquidSo ran balance command using:- btrfs balance start -dusage=75 /mnt/cache and got output of:- Done, had to relocate 86 out of 115 chunks Checked using:- btrfs fi df -h /mnt/cache/ and got:- Data, single: total=45.00GiB, used=44.83GiB System, single: total=4.00MiB, used=16.00KiB Metadata, single: total=1.01GiB, used=521.22MiB GlobalReserve, single: total=70.16MiB, used=0.00B But ia m still having same issue after an NZBGet container restart. UPDATE: For some reason it is now working! Thanks all. Edited March 23, 2019 by mgladwin more info Quote Link to comment
WannabeMKII Posted May 4, 2019 Share Posted May 4, 2019 (edited) I'm after some help, as my scripts have dropped from nzbget, but I've not knowingly changed anything. Attached are images showing the settings and hoping someone can point me in the right direction? The main one I'd like to get working in the email notification. Many thanks. Docker config; nzbget path; UNRAID path; Edited May 4, 2019 by WannabeMKII Image sorting. Quote Link to comment
WannabeMKII Posted May 6, 2019 Share Posted May 6, 2019 1 On 5/4/2019 at 11:57 AM, WannabeMKII said: I'm after some help, as my scripts have dropped from nzbget, but I've not knowingly changed anything. Attached are images showing the settings and hoping someone can point me in the right direction? The main one I'd like to get working in the email notification. Many thanks. Can anyone help point me in the right direction? Thanks. Quote Link to comment
CHBMB Posted May 6, 2019 Share Posted May 6, 2019 1 hour ago, WannabeMKII said: Can anyone help point me in the right direction? Thanks. What's the output of docker exec -it nzbget ls -la /config/scripts/ Quote Link to comment
WannabeMKII Posted May 6, 2019 Share Posted May 6, 2019 1 minute ago, CHBMB said: What's the output of docker exec -it nzbget ls -la /config/scripts/ Thanks for the response; root@*****:~# docker exec -it nzbget ls -la /config/scripts/ total 372 drwxr-xr-x 1 abc abc 106 May 4 11:50 . drwxrwxrwx 1 abc abc 76 Feb 20 2018 .. -rwxrwxrwx 1 abc abc 78620 Sep 1 2017 Completion.py -rw-rw-rw- 1 abc abc 65536 Feb 20 2018 DeleteSamples.py -rw-rwxr--+ 1 abc abc 127037 May 4 11:50 EMail.py drwxr-xr-x 1 abc abc 4096 Oct 29 2017 Subliminal -rw-rw-rw- 1 abc abc 90119 Oct 29 2017 Subliminal.py Quote Link to comment
CHBMB Posted May 6, 2019 Share Posted May 6, 2019 (edited) Well they're there..... Not sure if they need to be executable though, which they're not, other than Completion.py docker exec -it nzbget chmod +x /config/scripts/*.py Edited May 6, 2019 by CHBMB Quote Link to comment
WannabeMKII Posted May 6, 2019 Share Posted May 6, 2019 1 minute ago, CHBMB said: Well they're there..... Not sure if they need to be executable though, which they're not. docker exec -it nzbget chmod +x /config/scripts/*.py I've just run that too; root@*****:~# docker exec -it nzbget chmod +x /config/scripts/*.py chmod: cannot access '/config/scripts/*.py': No such file or directory What is strange is they've been working fine for a good couple of years, then they just dropped off? Quote Link to comment
CHBMB Posted May 6, 2019 Share Posted May 6, 2019 3 minutes ago, WannabeMKII said: I've just run that too; root@*****:~# docker exec -it nzbget chmod +x /config/scripts/*.py chmod: cannot access '/config/scripts/*.py': No such file or directory What is strange is they've been working fine for a good couple of years, then they just dropped off? Zip the scripts up and paste them here and I'll have a quick play around. Quote Link to comment
WannabeMKII Posted May 6, 2019 Share Posted May 6, 2019 3 minutes ago, CHBMB said: Zip the scripts up and paste them here and I'll have a quick play around. Perfect, thanks! Archive.zip Quote Link to comment
CHBMB Posted May 6, 2019 Share Posted May 6, 2019 2 minutes ago, WannabeMKII said: Perfect, thanks! Archive.zip 71.95 kB · 0 downloads Change the scripts directory to /config/scripts ${AppDir} refers to /app/nzbget Quote Link to comment
WannabeMKII Posted May 6, 2019 Share Posted May 6, 2019 9 minutes ago, CHBMB said: Change the scripts directory to /config/scripts ${AppDir} refers to /app/nzbget Ah ha perfect, that's bought 'subliminal' and 'completion' up, but not 'email' or 'deletesamples? Why would that happen? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.