kfc Posted October 6, 2019 Share Posted October 6, 2019 It seems like I have multiple transmission processes running in the docker. I dont know why this is happening, and I dont know where to start looking. Quote Link to comment
kfc Posted October 6, 2019 Share Posted October 6, 2019 (edited) It's just one running now after restart. Seems like it takes about a day for it to create a new one. Edit: deleting blocklist-update.sh solved the issue. Edited October 10, 2019 by kfc Quote Link to comment
Gyurci Posted October 21, 2019 Share Posted October 21, 2019 On 9/4/2019 at 1:56 AM, kpereira said: I'm having an issue where unraid is saying there's an update available for linuxserver/transmission:latest, but when I apply the update it's the same version that's already installed. After the "install" the update prompt goes away until I check for docker updates again, at which point I'm prompted to update again. I tried uninstalling and installing the docker via community apps, but the problem persists. Has anyone run into this or have any ideas to fix it? EDIT: I should also mention that this isn't happening for any of my other docker containers. I am also having the same issue! And also have another issue: my settings in the transmission ui is not persistent, for example if I set a speed limit schedule, I must re-set every time when I restart the container. Please give us some help about these issues. Quote Link to comment
emmcee Posted October 21, 2019 Share Posted October 21, 2019 1 hour ago, Gyurci said: I am also having the same issue! And also have another issue: my settings in the transmission ui is not persistent, for example if I set a speed limit schedule, I must re-set every time when I restart the container. Please give us some help about these issues. I’m fairly sure you need to edit settings.json. Not sure which one though. Possibly the one on the flash drive. Quote Link to comment
Gyurci Posted October 22, 2019 Share Posted October 22, 2019 23 hours ago, emmcee said: I’m fairly sure you need to edit settings.json. Not sure which one though. Possibly the one on the flash drive. There is no settings.json file on the flash drive. It is in the appdata/transmission folder, and if I look in that file, my settings are there, for example the ones for throttling download and upload speeds and scheduling them. I think there is not much to edit in the settings.json file, becouse my settings is already in there. And what about the update issue? It is constantly says, there is an update for the container, nevertheless I already applied the update. Quote Link to comment
Gyurci Posted October 25, 2019 Share Posted October 25, 2019 (edited) I'm trying to investigate the errors I mentioned earlier. In my syslog, there are these error lines about transmission: Oct 17 09:57:29 NAS kernel: transmission-da[24735]: segfault at 48 ip 000055b839ebe934 sp 00001530e6e90a48 error 4 in transmission-daemon[55b839e96000+4b000] Oct 20 13:23:35 NAS kernel: transmission-da[5810]: segfault at 48 ip 000055987f3e9934 sp 000014e5d87a2a48 error 4 in transmission-daemon[55987f3c1000+4b000] Oct 21 19:06:08 NAS kernel: transmission-da[4383]: segfault at 24000000 ip 0000557c9f39c93f sp 000014ba6191ba48 error 4 in transmission-daemon[557c9f374000+4b000] Oct 23 11:05:07 NAS kernel: transmission-da[13708]: segfault at 48 ip 0000560692121934 sp 0000150fea543a48 error 4 in transmission-daemon[5606920f9000+4b000] Oct 23 13:33:20 NAS kernel: transmission-da[21612]: segfault at 18 ip 000055baf05b4a71 sp 000014a17c8f47f0 error 6 in transmission-daemon[55baf0595000+4b000] Oct 24 08:28:03 NAS kernel: transmission-da[17826]: segfault at 0 ip 0000000000000000 sp 0000151b068b5a58 error 14 in Budapest[151b0686f000+1000] Oct 25 08:54:51 NAS kernel: transmission-da[31340]: segfault at 48 ip 0000561d50782934 sp 00001461a7dd9a48 error 4 in transmission-daemon[561d5075a000+4b000] Are these errors related to the errors I mentioned in the earlier posts in any way, or what is this? Also I created a dedicated watch folder alongside the already existing complete and incomplete folders in my downloads share, because my watch folder was my downloads share earlier. This looks like corrected the "settings reset bug" I think, because those are persistent since then (the settings of my download/upload speed restrictions and scheduling of them, etc). Edited October 25, 2019 by Gyurci Quote Link to comment
Gyurci Posted October 29, 2019 Share Posted October 29, 2019 Looks like most of my problems are gone. I stopped my array and then restarted it for another reason and since then there are no segfault errors in my log. The settings of transmission looks like persistent now. Only one error left: the transmission docker keeps saying that an update is available, but I can live with it... Maybe the next real update will correct this too. Quote Link to comment
Squid Posted October 29, 2019 Share Posted October 29, 2019 14 minutes ago, Gyurci said: the transmission docker keeps saying that an update is available Presumably, you're running unRaid 6.7.2. Installing the Auto Update Plugin (whether you even enable it or not) will patch the OS to fix that (due to a change on docker's servers). Or update to 6.8 Quote Link to comment
Gyurci Posted October 30, 2019 Share Posted October 30, 2019 20 hours ago, Squid said: Presumably, you're running unRaid 6.7.2. Installing the Auto Update Plugin (whether you even enable it or not) will patch the OS to fix that (due to a change on docker's servers). Or update to 6.8 Thanks for the reply, yes I'm using unRaid 6.7.2. I give a chance to the Auto Update Plugin and see if it helps. I do not want to upgrade to 6.8 yet, I will stay in the stable branch. Quote Link to comment
cbr600ds2 Posted December 11, 2019 Share Posted December 11, 2019 So - I'm seriously thinking that there's a setting I'm missing but maybe I'm going crazy. There's nothing being uploaded but I am getting downloads. Am I going crazy. What should I look to fix? 1 Quote Link to comment
CattDamon Posted December 16, 2019 Share Posted December 16, 2019 Is there any way to implement dark mode? I see that there are some .css around the web but am not entirely sure how to begin since we run in docker. Anyone played around with it? Quote Link to comment
comet424 Posted January 29, 2020 Share Posted January 29, 2020 hi I had to delete my docker and start over... but my transmission isn't working like it used to it would download my stuff in a incomplete folder and when done it move to a completed folder but its not doing that anymore... what do I have to do to fix it as I cant remember what I had set... right now its saving the completed downloads in the incomplete folder Quote Link to comment
shampoo Posted February 3, 2020 Share Posted February 3, 2020 Hi, I am having a newb problem. I am able to download and upload torrents. This works fine. However, I cannot figure out how to share the downloaded torrents via SMB. Here is what I have: There are actual torrents under /downloads/complete. But I can't seem to access these torrents via SMB.. Any ideas ? Thanks! Quote Link to comment
trurl Posted February 3, 2020 Share Posted February 3, 2020 Those are not mappings to user shares or indeed any actual storage. That path was created in RAM by your mapping. Have you read any of the Docker FAQ (pinned near the top of the Docker Engine subforum) or followed any guide to setting up a docker? Quote Link to comment
trurl Posted February 3, 2020 Share Posted February 3, 2020 I guess another possibility is you are not using this on Unraid but some other system, in which case you are on the wrong forum. Quote Link to comment
shampoo Posted February 3, 2020 Share Posted February 3, 2020 2 hours ago, trurl said: I guess another possibility is you are not using this on Unraid but some other system, in which case you are on the wrong forum. I am definitely running unraid. Thanks for the link for the FAQ. I need to read up on how to expose the docker container drive.. Quote Link to comment
comet424 Posted February 12, 2020 Share Posted February 12, 2020 how do you force transmission after a appdata backup when it reloads or when you stop/start service so the damn thing doesn't keep selecting on click enable temporary speed limits what setting in settings.json turns that off Quote Link to comment
Ockingshay Posted May 28, 2020 Share Posted May 28, 2020 Transmission has been updated to V3, but as it's so new it hasn't been whitelisted yet. Will this automatically update as part of the weekly Friday cycle? If yes, is there a way i can keep it at 2.93? many thanks Quote Link to comment
cbr600ds2 Posted June 16, 2020 Share Posted June 16, 2020 Transmission was working - I was running out of space on my cache drive so I bought a 1tb SSD and wanted to change the downloads so when it downloads it puts it on the 1tb SSD that is mounted via unassigned devices (SSD is mounted in rw/slave) but now I'm trying to check it but its not even connecting to tracker. would a copy of the settings.json file be better? Quote Link to comment
comet424 Posted June 16, 2020 Share Posted June 16, 2020 (edited) host path 2 container path is /downloads Host path is /mnt/disks/SATA_SSD.... Slave Read Write and host path 3 container path is /watch Host path is /mnt/disks/SATA_SSD/watch Slave Read Write and make sure to move all the torrents off your cache drive to your 1TB before restarting transmission as you make have to do the verify data in transmission it should work for you.. if your using a VPN like NordVPN they are experiencing issues and many of there servers are down so your transmission trackers wont be working Edited June 16, 2020 by comet424 Quote Link to comment
comet424 Posted June 16, 2020 Share Posted June 16, 2020 (edited) @cbr600ds2 this is the settings I do so /downloads is the root /downloads/incomplete is the files being downloaded /downloads/complete is the files completed... Edited June 16, 2020 by comet424 Quote Link to comment
cbr600ds2 Posted June 16, 2020 Share Posted June 16, 2020 (edited) @comet424 yeah that's how I have mine. Is it weird that the torrents I've downloaded from Rarbg didn't work through here but it worked through my normal computer? I did try my private tracker (which is the crux of this whole change by the way) and that works for downloading and uploading (I had to run a chmod command) *welp* I changed the watch path to the same drive and it downloaded just fine. That was weird. Edited June 16, 2020 by cbr600ds2 SOLVED Quote Link to comment
comet424 Posted June 16, 2020 Share Posted June 16, 2020 @cbr600ds2 ah that is weird.. least its working. I was going to say maybe your router isn't doing like Upnp or ports for the unraid but its open on your normal computer least you were able to solve it.. Quote Link to comment
cbr600ds2 Posted June 16, 2020 Share Posted June 16, 2020 @comet424 Yeah, appreciate that help! Quote Link to comment
NMGMarques Posted July 23, 2020 Share Posted July 23, 2020 When connecting from outside the lan, I can bring up the web ui but receive a popup box with transmission telling me: Connection Failed Could not connect to the server. You may need to reload the page to reconnect. Hitting the details button spits out the following: 421: Misdirected RequestTransmission received your request, but the hostname was unrecognized. To fix this, choose one of the following options:Enable password authentication, then any hostname is allowed. Add the hostname you want to use to the whitelist in settings. If you're editing settings.json, see the 'rpc-host-whitelist' and 'rpc-host-whitelist-enabled' entries. This requirement has been added to help prevent DNS Rebinding attacks. Leading me to think I may need to activate the password which was the intent all along anyway. Problem is I can't find a way to do it. Can someone offer any insight? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.