wgstarks Posted January 6, 2023 Share Posted January 6, 2023 17 minutes ago, chickpea said: I have been having an issue with radarr and sonarr the past couple weeks, Qbit has an annoying habit of resetting download locations to default on occasion when the docker is updated. I had to restore my download settings this morning after updating the docker. You should check your qbit settings and make sure the paths haven’t changed. They should all start with /data unless you are using a custom configuration. Quote Link to comment
chickpea Posted January 7, 2023 Share Posted January 7, 2023 1 hour ago, wgstarks said: You should check your qbit settings and make sure the paths haven’t changed. They should all start with /data unless you are using a custom configuration. I do not use qbit. Quote Link to comment
wgstarks Posted January 7, 2023 Share Posted January 7, 2023 8 minutes ago, chickpea said: I do not use qbit. My bad. Wasn’t paying enough attention to which thread I was in. This error usually occurs when a path isn’t configured properly and Sonarr/Radarr is looking in the wrong place for files. The file should be in /data but the error shows /downloads. Post the docker run for your download client. Be sure to redact users and passwords. Quote Link to comment
chickpea Posted January 7, 2023 Share Posted January 7, 2023 13 hours ago, wgstarks said: Post the docker run for your download client. Be sure to redact users and passwords. Here is the docker run. This started a couple weeks ago after upgrading binhex-sabnzbd and the web gui wouldn't load afterwards. I had to switch to linuxserver's version. Since then the permissions haven't worked. Quote Link to comment
wgstarks Posted January 7, 2023 Share Posted January 7, 2023 2 minutes ago, chickpea said: Here is the docker run. This started a couple weeks ago after upgrading binhex-sabnzbd and the web gui wouldn't load afterwards. I had to switch to linuxserver's version. Since then the permissions haven't worked. I had a feeling. The LSIO version of the docker uses /downloads rather than /data in the binhex dockers. That’s not going tho work. You’ll need to change that path so that it’s an exact match for the one configured in Sonarr/Radarr. Host and container paths both. /data:/mnt/user/downloads/ Quote Link to comment
wgstarks Posted January 7, 2023 Share Posted January 7, 2023 (edited) I’m not very familiar with Sabnzbd but fairly sure you’ll need to reconfigure your download settings in the app to /data also. Edited January 7, 2023 by wgstarks Quote Link to comment
wgstarks Posted January 7, 2023 Share Posted January 7, 2023 6 minutes ago, wgstarks said: I’m not very familiar with Sabnzbd but fairly sure you’ll need to reconfigure your download settings in the app to /data also. Actually, probably best to just add a new path for /data, rather than changing /downloads, and then change the download location inside the app. If it’s anything like qbit it’ll move any torrents you’ve already downloaded and Sonarr/Radarr will see them. Quote Link to comment
Jorgen Posted January 7, 2023 Share Posted January 7, 2023 Since the topic of mismatched docker path mappings comes up quite often with Radarr/Sonarr and download clients, maybe this diagram helps to visualize the three levels of folder config and how they interact? Important to realize is that the application running inside the docker container knows nothing about the Unraid shares. It can ONLY access folders you have specifically added as a container path in the docker config. Quote Link to comment
SimplifyAndAddCoffee Posted January 12, 2023 Share Posted January 12, 2023 I'm having an issue migrating Radarr to a new server. Whether I copy the config files manually, or use the built in backup/restore feature. I am trying to change the relative location of the root folder. e.g. OLD: path /mnt/user/media/=/media && root folder =/media/Movies NEW: path /mnt/user/media/Movies/=/media && root foldere =/media The problem I am having is that I cannot add or change the root folders. DEBG 'radarr' stdout output: [Warn] RadarrErrorPipeline: Invalid request Validation failed: -- Path: Folder is not writable by user nobody Quote Link to comment
wgstarks Posted January 12, 2023 Share Posted January 12, 2023 30 minutes ago, SimplifyAndAddCoffee said: The problem I am having is that I cannot add or change the root folders. Post your docker run command. Quote Link to comment
SimplifyAndAddCoffee Posted January 12, 2023 Share Posted January 12, 2023 7 hours ago, wgstarks said: Post your docker run command. I got this working after running Docker Safe New Perms under Tools. Quote Link to comment
sfleck Posted January 18, 2023 Share Posted January 18, 2023 (edited) On 2/2/2022 at 9:02 AM, binhex said: rm -R /mnt/user/appdata/binhex-radarr/radarr.db I found this command to wipe the radarr.db, but what is the command to rename radarr.db to radarr.db.old ? new to linux mv /mnt/user/appdata/binhex-radarr/radarr.db radarr.db.old Edited January 18, 2023 by sfleck Quote Link to comment
wgstarks Posted January 18, 2023 Share Posted January 18, 2023 4 minutes ago, sfleck said: I found this command to wipe the radarr.db, but what is the command to rename radarr.db to radarr.db.old ? new to linux You can just rename it manually. It’s in the appdata folder. Install the Dynamix File Manager plugin if you haven’t already. Navigate to the file and click the + sign. Rename will be one of the options. Quote Link to comment
sfleck Posted January 18, 2023 Share Posted January 18, 2023 that worked! thanks wgstarks ! Quote Link to comment
scettles Posted February 5, 2023 Share Posted February 5, 2023 havent updated radarr in a while... went ahead and updated it and now it wont start.... ErrorWarningSystemArrayLogin Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-01-31 17:15:03.995137 [info] Host is running unRAID 2023-01-31 17:15:04.011321 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-01-31 17:15:04.031736 [info] OS_ARCH defined as 'x86-64' 2023-01-31 17:15:04.050843 [info] PUID defined as '99' 2023-01-31 17:15:04.085158 [info] PGID defined as '100' 2023-01-31 17:15:04.121973 [info] UMASK defined as '000' 2023-01-31 17:15:04.140172 [info] Permissions already set for '/config' 2023-01-31 17:15:04.162637 [info] Deleting files in /tmp (non recursive)... 2023-01-31 17:15:04.188784 [info] Starting Supervisor... 2023-01-31 17:15:04,459 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-01-31 17:15:04,460 INFO Set uid to user 0 succeeded 2023-01-31 17:15:04,462 INFO supervisord started with pid 7 2023-01-31 17:15:05,464 INFO spawned: 'radarr' with pid 65 2023-01-31 17:15:05,464 INFO reaped unknown pid 8 (exit status 0) 2023-01-31 17:15:05,491 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:05,491 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639640112 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:05,492 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640064 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:05,492 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:05,492 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:06,494 INFO spawned: 'radarr' with pid 68 2023-01-31 17:15:06,503 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:06,504 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639635504 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:06,504 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640160 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:06,504 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:06,504 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:08,507 INFO spawned: 'radarr' with pid 71 2023-01-31 17:15:08,516 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:08,517 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639640112 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:08,517 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640400 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:08,517 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:08,517 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:11,521 INFO spawned: 'radarr' with pid 74 2023-01-31 17:15:11,530 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:11,530 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639635504 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:11,530 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640592 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:11,531 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:11,531 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:12,532 INFO gave up: radarr entered FATAL state, too many start retries too quickly 2023-01-31 17:17:01,642 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-02-05 15:07:56.162100 [info] Host is running unRAID 2023-02-05 15:07:56.178095 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-02-05 15:07:56.198493 [info] OS_ARCH defined as 'x86-64' 2023-02-05 15:07:56.218041 [info] PUID defined as '99' 2023-02-05 15:07:56.239871 [info] PGID defined as '100' 2023-02-05 15:07:56.270740 [info] UMASK defined as '000' 2023-02-05 15:07:56.288584 [info] Permissions already set for '/config' 2023-02-05 15:07:56.312023 [info] Deleting files in /tmp (non recursive)... 2023-02-05 15:07:56.333478 [info] Starting Supervisor... 2023-02-05 15:07:56,613 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-02-05 15:07:56,613 INFO Set uid to user 0 succeeded 2023-02-05 15:07:56,615 INFO supervisord started with pid 6 2023-02-05 15:07:57,617 INFO spawned: 'radarr' with pid 57 2023-02-05 15:07:57,617 INFO reaped unknown pid 7 (exit status 0) 2023-02-05 15:07:57,647 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:07:57,647 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333923664 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:07:57,647 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923616 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:07:57,648 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:07:57,648 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:07:58,650 INFO spawned: 'radarr' with pid 60 2023-02-05 15:07:58,661 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:07:58,662 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333919056 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:07:58,662 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923712 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:07:58,662 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:07:58,662 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:00,665 INFO spawned: 'radarr' with pid 63 2023-02-05 15:08:00,675 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:08:00,675 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333923664 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:08:00,675 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923952 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:08:00,675 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:08:00,676 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:03,680 INFO spawned: 'radarr' with pid 66 2023-02-05 15:08:03,689 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:08:03,690 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333919056 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:08:03,690 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333924144 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:08:03,690 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:08:03,690 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:04,691 INFO gave up: radarr entered FATAL state, too many start retries too quickly 2023-02-05 15:08:39,728 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-02-05 15:13:11.297434 [info] Host is running unRAID 2023-02-05 15:13:11.313413 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-02-05 15:13:11.332552 [info] OS_ARCH defined as 'x86-64' 2023-02-05 15:13:11.351054 [info] PUID defined as '99' 2023-02-05 15:13:11.372144 [info] PGID defined as '100' 2023-02-05 15:13:11.400372 [info] UMASK defined as '000' 2023-02-05 15:13:11.418225 [info] Permissions already set for '/config' 2023-02-05 15:13:11.440405 [info] Deleting files in /tmp (non recursive)... 2023-02-05 15:13:11.461558 [info] Starting Supervisor... 2023-02-05 15:13:11,656 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-02-05 15:13:11,656 INFO Set uid to user 0 succeeded 2023-02-05 15:13:11,657 INFO supervisord started with pid 6 2023-02-05 15:13:12,659 INFO spawned: 'radarr' with pid 57 2023-02-05 15:13:12,659 INFO reaped unknown pid 7 (exit status 0) 2023-02-05 15:13:12,668 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:12,669 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679227856 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:12,669 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679227808 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:12,669 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:12,669 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:13,671 INFO spawned: 'radarr' with pid 60 2023-02-05 15:13:13,681 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:13,681 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679223248 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:13,681 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679227904 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:13,681 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:13,682 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:15,684 INFO spawned: 'radarr' with pid 63 2023-02-05 15:13:15,693 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:15,694 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679227856 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:15,694 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679228144 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:15,694 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:15,694 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:18,698 INFO spawned: 'radarr' with pid 66 2023-02-05 15:13:18,708 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:18,708 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679223248 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:18,708 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679228336 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:18,708 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:18,708 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:19,709 INFO gave up: radarr entered FATAL state, too many start retries too quickly Quote Link to comment
razorweb Posted February 6, 2023 Share Posted February 6, 2023 2 hours ago, scettles said: havent updated radarr in a while... went ahead and updated it and now it wont start.... ErrorWarningSystemArrayLogin Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-01-31 17:15:03.995137 [info] Host is running unRAID 2023-01-31 17:15:04.011321 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-01-31 17:15:04.031736 [info] OS_ARCH defined as 'x86-64' 2023-01-31 17:15:04.050843 [info] PUID defined as '99' 2023-01-31 17:15:04.085158 [info] PGID defined as '100' 2023-01-31 17:15:04.121973 [info] UMASK defined as '000' 2023-01-31 17:15:04.140172 [info] Permissions already set for '/config' 2023-01-31 17:15:04.162637 [info] Deleting files in /tmp (non recursive)... 2023-01-31 17:15:04.188784 [info] Starting Supervisor... 2023-01-31 17:15:04,459 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-01-31 17:15:04,460 INFO Set uid to user 0 succeeded 2023-01-31 17:15:04,462 INFO supervisord started with pid 7 2023-01-31 17:15:05,464 INFO spawned: 'radarr' with pid 65 2023-01-31 17:15:05,464 INFO reaped unknown pid 8 (exit status 0) 2023-01-31 17:15:05,491 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:05,491 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639640112 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:05,492 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640064 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:05,492 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:05,492 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:06,494 INFO spawned: 'radarr' with pid 68 2023-01-31 17:15:06,503 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:06,504 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639635504 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:06,504 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640160 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:06,504 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:06,504 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:08,507 INFO spawned: 'radarr' with pid 71 2023-01-31 17:15:08,516 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:08,517 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639640112 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:08,517 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640400 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:08,517 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:08,517 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:11,521 INFO spawned: 'radarr' with pid 74 2023-01-31 17:15:11,530 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-01-31 17:15:11,530 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23292639635504 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stdout)> 2023-01-31 17:15:11,530 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23292639640592 for <Subprocess at 23292639635408 with name radarr in state STARTING> (stderr)> 2023-01-31 17:15:11,531 INFO exited: radarr (exit status 137; not expected) 2023-01-31 17:15:11,531 DEBG received SIGCHLD indicating a child quit 2023-01-31 17:15:12,532 INFO gave up: radarr entered FATAL state, too many start retries too quickly 2023-01-31 17:17:01,642 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-02-05 15:07:56.162100 [info] Host is running unRAID 2023-02-05 15:07:56.178095 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-02-05 15:07:56.198493 [info] OS_ARCH defined as 'x86-64' 2023-02-05 15:07:56.218041 [info] PUID defined as '99' 2023-02-05 15:07:56.239871 [info] PGID defined as '100' 2023-02-05 15:07:56.270740 [info] UMASK defined as '000' 2023-02-05 15:07:56.288584 [info] Permissions already set for '/config' 2023-02-05 15:07:56.312023 [info] Deleting files in /tmp (non recursive)... 2023-02-05 15:07:56.333478 [info] Starting Supervisor... 2023-02-05 15:07:56,613 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-02-05 15:07:56,613 INFO Set uid to user 0 succeeded 2023-02-05 15:07:56,615 INFO supervisord started with pid 6 2023-02-05 15:07:57,617 INFO spawned: 'radarr' with pid 57 2023-02-05 15:07:57,617 INFO reaped unknown pid 7 (exit status 0) 2023-02-05 15:07:57,647 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:07:57,647 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333923664 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:07:57,647 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923616 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:07:57,648 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:07:57,648 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:07:58,650 INFO spawned: 'radarr' with pid 60 2023-02-05 15:07:58,661 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:07:58,662 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333919056 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:07:58,662 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923712 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:07:58,662 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:07:58,662 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:00,665 INFO spawned: 'radarr' with pid 63 2023-02-05 15:08:00,675 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:08:00,675 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333923664 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:08:00,675 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333923952 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:08:00,675 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:08:00,676 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:03,680 INFO spawned: 'radarr' with pid 66 2023-02-05 15:08:03,689 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:08:03,690 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22591333919056 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stdout)> 2023-02-05 15:08:03,690 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22591333924144 for <Subprocess at 22591333918960 with name radarr in state STARTING> (stderr)> 2023-02-05 15:08:03,690 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:08:03,690 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:08:04,691 INFO gave up: radarr entered FATAL state, too many start retries too quickly 2023-02-05 15:08:39,728 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-02-05 15:13:11.297434 [info] Host is running unRAID 2023-02-05 15:13:11.313413 [info] System information Linux 6e6956a8654d 5.8.18-Unraid #1 SMP Mon Nov 2 07:15:12 PST 2020 x86_64 GNU/Linux 2023-02-05 15:13:11.332552 [info] OS_ARCH defined as 'x86-64' 2023-02-05 15:13:11.351054 [info] PUID defined as '99' 2023-02-05 15:13:11.372144 [info] PGID defined as '100' 2023-02-05 15:13:11.400372 [info] UMASK defined as '000' 2023-02-05 15:13:11.418225 [info] Permissions already set for '/config' 2023-02-05 15:13:11.440405 [info] Deleting files in /tmp (non recursive)... 2023-02-05 15:13:11.461558 [info] Starting Supervisor... 2023-02-05 15:13:11,656 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing 2023-02-05 15:13:11,656 INFO Set uid to user 0 succeeded 2023-02-05 15:13:11,657 INFO supervisord started with pid 6 2023-02-05 15:13:12,659 INFO spawned: 'radarr' with pid 57 2023-02-05 15:13:12,659 INFO reaped unknown pid 7 (exit status 0) 2023-02-05 15:13:12,668 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:12,669 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679227856 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:12,669 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679227808 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:12,669 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:12,669 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:13,671 INFO spawned: 'radarr' with pid 60 2023-02-05 15:13:13,681 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:13,681 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679223248 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:13,681 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679227904 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:13,681 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:13,682 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:15,684 INFO spawned: 'radarr' with pid 63 2023-02-05 15:13:15,693 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:15,694 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679227856 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:15,694 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679228144 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:15,694 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:15,694 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:18,698 INFO spawned: 'radarr' with pid 66 2023-02-05 15:13:18,708 DEBG 'radarr' stderr output: Failed to create CoreCLR, HRESULT: 0x80070008 2023-02-05 15:13:18,708 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22836679223248 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stdout)> 2023-02-05 15:13:18,708 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22836679228336 for <Subprocess at 22836679223152 with name radarr in state STARTING> (stderr)> 2023-02-05 15:13:18,708 INFO exited: radarr (exit status 137; not expected) 2023-02-05 15:13:18,708 DEBG received SIGCHLD indicating a child quit 2023-02-05 15:13:19,709 INFO gave up: radarr entered FATAL state, too many start retries too quickly Same error here. Quote Link to comment
binhex Posted February 6, 2023 Author Share Posted February 6, 2023 9 hours ago, scettles said: Failed to create CoreCLR, HRESULT: 0x80070008 7 hours ago, razorweb said: Same error here. i would assume you both are running older docker engine, if you are running unraid then update to the latest stable release, if you are running anything else then update docker engine to the latest version. Quote Link to comment
mbutler76 Posted February 11, 2023 Share Posted February 11, 2023 I am having an issue connecting to NZBfinder. I can connect using my API key on my personal laptop, but trying to do so from a docker container on UnRaid gives me the following error "Unable to connect to indexer, check the log for more details" Here is what the logs say, I'm not seeing anything useful, but maybe someone else would. I would have to guess it has something to do with my networking somewhere. I don't have any of my *arr running behind a VPN on UnRaid 2023-02-25 04:23:46.8|Error|X509CertificateValidationService|Certificate validation for nzbfinder.ws failed. RemoteCertificateChainErrors 2023-02-25 04:23:46.8|Warn|Newznab|Unable to connect to indexer [v1.1.3.2521] System.Net.Http.HttpRequestException: The SSL connection could not be established, see inner exception. ---> System.Security.Authentication.AuthenticationException: The remote certificate was rejected by the provided RemoteCertificateValidationCallback. at System.Net.Security.SslStream.SendAuthResetSignal(ProtocolToken message, ExceptionDispatchInfo exception) at System.Net.Security.SslStream.CompleteHandshake(SslAuthenticationOptions sslAuthenticationOptions) at System.Net.Security.SslStream.ForceAuthenticationAsync[TIOAdapter](TIOAdapter adapter, Boolean receiveFirst, Byte[] reAuthenticationData, Boolean isApm) at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.ConnectAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.CreateHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.AddHttp11ConnectionAsync(HttpRequestMessage request) at System.Threading.Tasks.TaskCompletionSourceWithCancellation`1.WaitWithCancellationAsync(CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.GetHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithVersionDetectionAndRetryAsync(HttpRequestMessage request, Boolean async, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.AuthenticationHelper.SendWithAuthAsync(HttpRequestMessage request, Uri authUri, Boolean async, ICredentials credentials, Boolean preAuthenticate, Boolean isProxyAuth, Boolean doRequestAuth, HttpConnectionPool pool, CancellationToken cancellationToken) at System.Net.Http.DiagnosticsHandler.SendAsyncCore(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.DecompressionHandler.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpClient.<SendAsync>g__Core|83_0(HttpRequestMessage request, HttpCompletionOption completionOption, CancellationTokenSource cts, Boolean disposeCts, CancellationTokenSource pendingRequestsCts, CancellationToken originalCancellationToken) at NzbDrone.Common.Http.Dispatchers.ManagedHttpDispatcher.GetResponseAsync(HttpRequest request, CookieContainer cookies) in D:\a\1\s\src\NzbDrone.Common\Http\Dispatchers\ManagedHttpDispatcher.cs:line 108 at NzbDrone.Common.Http.HttpClient.ExecuteRequestAsync(HttpRequest request, CookieContainer cookieContainer) in D:\a\1\s\src\NzbDrone.Common\Http\HttpClient.cs:line 170 at NzbDrone.Common.Http.HttpClient.ExecuteAsync(HttpRequest request) in D:\a\1\s\src\NzbDrone.Common\Http\HttpClient.cs:line 70 at NzbDrone.Common.Http.HttpClient.Execute(HttpRequest request) in D:\a\1\s\src\NzbDrone.Common\Http\HttpClient.cs:line 136 at NzbDrone.Core.Indexers.IndexerHttpClient.ExecuteProxied(HttpRequest request, ProviderDefinition definition) in D:\a\1\s\src\NzbDrone.Core\Indexers\IndexerHttpClient.cs:line 50 at NzbDrone.Core.Indexers.Newznab.NewznabCapabilitiesProvider.FetchCapabilities(NewznabSettings indexerSettings, ProviderDefinition definition) in D:\a\1\s\src\NzbDrone.Core\Indexers\Definitions\Newznab\NewznabCapabilitiesProvider.cs:line 61 at NzbDrone.Core.Indexers.Newznab.NewznabCapabilitiesProvider.<>c__DisplayClass4_0.<GetCapabilities>b__0() in D:\a\1\s\src\NzbDrone.Core\Indexers\Definitions\Newznab\NewznabCapabilitiesProvider.cs:line 37 at NzbDrone.Common.Cache.Cached`1.Get(String key, Func`1 function, Nullable`1 lifeTime) in D:\a\1\s\src\NzbDrone.Common\Cache\Cached.cs:line 104 at NzbDrone.Core.Indexers.Newznab.NewznabCapabilitiesProvider.GetCapabilities(NewznabSettings indexerSettings, ProviderDefinition definition) in D:\a\1\s\src\NzbDrone.Core\Indexers\Definitions\Newznab\NewznabCapabilitiesProvider.cs:line 39 at NzbDrone.Core.Indexers.Newznab.Newznab.get_PageSize() in D:\a\1\s\src\NzbDrone.Core\Indexers\Definitions\Newznab\Newznab.cs:line 32 at NzbDrone.Core.Indexers.Newznab.Newznab.GetRequestGenerator() in D:\a\1\s\src\NzbDrone.Core\Indexers\Definitions\Newznab\Newznab.cs:line 36 at NzbDrone.Core.Indexers.HttpIndexerBase`1.TestConnection() in D:\a\1\s\src\NzbDrone.Core\Indexers\HttpIndexerBase.cs:line 508 2023-02-25 04:23:46.8|Error|Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware|An unhandled exception has occurred while executing the request. [v1.1.3.2521] FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log for more details at Prowlarr.Api.V1.ProviderControllerBase`3.VerifyValidationResult(ValidationResult validationResult, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 209 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderResource providerResource) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 146 at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.SyncObjectResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeActionMethodAsync() at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task) 2023-02-25 04:23:46.9|Warn|ProwlarrErrorPipeline|FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log for more details [v1.1.3.2521] FluentValidation.ValidationException: Validation failed: -- : Unable to connect to indexer, check the log for more details at Prowlarr.Api.V1.ProviderControllerBase`3.VerifyValidationResult(ValidationResult validationResult, Boolean includeWarnings) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 209 at Prowlarr.Api.V1.ProviderControllerBase`3.Test(TProviderResource providerResource) in D:\a\1\s\src\Prowlarr.Api.V1\ProviderControllerBase.cs:line 146 at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.SyncObjectResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeActionMethodAsync() at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeNextActionFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.InvokeInnerFilterAsync() --- End of stack trace from previous location --- at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|20_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Prowlarr.Http.Middleware.BufferingMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\BufferingMiddleware.cs:line 28 at Prowlarr.Http.Middleware.IfModifiedMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\IfModifiedMiddleware.cs:line 41 at Prowlarr.Http.Middleware.CacheHeaderMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\CacheHeaderMiddleware.cs:line 33 at Prowlarr.Http.Middleware.UrlBaseMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\UrlBaseMiddleware.cs:line 27 at Prowlarr.Http.Middleware.VersionMiddleware.InvokeAsync(HttpContext context) in D:\a\1\s\src\Prowlarr.Http\Middleware\VersionMiddleware.cs:line 28 at Microsoft.AspNetCore.ResponseCompression.ResponseCompressionMiddleware.InvokeCore(HttpContext context) at Microsoft.AspNetCore.Authorization.Policy.AuthorizationMiddlewareResultHandler.HandleAsync(RequestDelegate next, HttpContext context, AuthorizationPolicy policy, PolicyAuthorizationResult authorizeResult) at Microsoft.AspNetCore.Authorization.AuthorizationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Microsoft.AspNetCore.Diagnostics.ExceptionHandlerMiddleware.<Invoke>g__Awaited|6_0(ExceptionHandlerMiddleware middleware, HttpContext context, Task task) 2023-02-25 04:23:46.9|Warn|ProwlarrErrorPipeline|Invalid request Validation failed: -- : Unable to connect to indexer, check the log for more details Quote Link to comment
ati Posted February 12, 2023 Share Posted February 12, 2023 On 2/6/2023 at 5:06 AM, binhex said: i would assume you both are running older docker engine, if you are running unraid then update to the latest stable release, if you are running anything else then update docker engine to the latest version. Is there anyway to update Docker without updating unRAID? I after a few attempts at upgrading that produced undesirable issues I have rolled back. If not, what is the latest version of the container I can run? Quote Link to comment
razorweb Posted February 13, 2023 Share Posted February 13, 2023 On 2/12/2023 at 10:34 AM, ati said: Is there anyway to update Docker without updating unRAID? I after a few attempts at upgrading that produced undesirable issues I have rolled back. If not, what is the latest version of the container I can run? So I’ll tell you what worked and didn’t work for me: 1. Tried to uninstall and reinstall binhex-radarr. Unsuccessful. 2. Updated Unraid to latest version after making a backup. I had the same stability fears as you due to bad prior experience but so far latest release is stable. But the upgrade, alone, was unsuccessful. 3. Using the instructions in the faq, attempted db recovery with the gui db recovery tool. This was unsuccessful at first. 4. Installed a fresh install of Linuxserver.io’s radarr, and dumped the recovered db in there. Presto - success! I don’t know why it worked, just that it worked. You could potentially try this before updating unraid. Good luck. Quote Link to comment
hahler2 Posted February 18, 2023 Share Posted February 18, 2023 So recently I've noticed that radarr is not importing downloaded movies properly. It will send the request to qbittorent and download them, but then it's not importing them once the download is complete. Sonarr is working perfectly. I noticed there are some errors in my logs, but not sure how to fix them. text error warn system array login [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1058 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 188 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 151 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 137 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 141 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in D:\a\1\s\src\NzbDrone.Core\Jobs\Scheduler.cs:line 42 at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread) 2023-02-18 15:43:03,896 DEBG 'radarr' stdout output: [Error] TaskExtensions: Task Error [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1058 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 188 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 151 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 137 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 141 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in D:\a\1\s\src\NzbDrone.Core\Jobs\Scheduler.cs:line 42 at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread) 2023-02-18 15:43:33,898 DEBG 'radarr' stdout output: [Error] TaskExtensions: Task Error [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1058 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 188 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 151 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 137 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 141 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in D:\a\1\s\src\NzbDrone.Core\Jobs\Scheduler.cs:line 42 at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread) 2023-02-18 15:44:03,899 DEBG 'radarr' stdout output: [Error] TaskExtensions: Task Error [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1075 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1058 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 188 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in D:\a\1\s\src\NzbDrone.Core\Datastore\BasicRepository.cs:line 151 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 137 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in D:\a\1\s\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:line 141 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in D:\a\1\s\src\NzbDrone.Core\Jobs\Scheduler.cs:line 42 at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread) How do I fix this? Quote Link to comment
hahler2 Posted February 18, 2023 Share Posted February 18, 2023 I may have fixed it. I found the directions for fixing a corrupt database. Everything is updating now. Will see if that fixes the errors and lets new movies download properly. Quote Link to comment
DeepSee Posted February 21, 2023 Share Posted February 21, 2023 On 1/5/2023 at 8:14 AM, King908 said: Figured it out, had to change some of the nameservers in deluge vpn. Removed the 209.X IP's I started having this issue about two weeks ago when I updated deluge. What do you mean by removing the 209.x IPs? I am having this issue and the only way to keep radar working is to not use proxy. Quote Link to comment
Apollopayne35 Posted March 24, 2023 Share Posted March 24, 2023 Hi all, I was using Basic ( pop up login page ) and when I change it to Forms ( login page ). I type my user name and password and then I get this error? I restored the config.xml file which fixes Radarr, but it back on Basic login. I setup Hotio Radarr as a test and Forms works fine. Is there a way to fix this? Couldn't find any solution online. Quote Link to comment
johnzimm Posted April 10, 2023 Share Posted April 10, 2023 (edited) "Search failed, please try again later." I can't seem to get passed this problem when I try to import my library into Radarr. Anyone know how to fix this? radarr.txt Edited April 15, 2023 by johnzimm Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.