Djoss Posted December 10, 2018 Author Share Posted December 10, 2018 7 hours ago, Its Andrew said: I just installed Handbrake and I keep getting the error "can not read or write the directory" Did you installed the container with default settings? What are you trying to do when you get this error? Quote Link to comment
theangelofspace15 Posted December 16, 2018 Share Posted December 16, 2018 is there a way to use h265 gpu HW? thanks. Quote Link to comment
Taddeusz Posted December 16, 2018 Share Posted December 16, 2018 4 minutes ago, theangelofspace15 said: is there a way to use h265 gpu HW? thanks. As far as I know you can only do this with Intel CPU's. The set up is the same as for Plex. You load the i915 driver and pass "--device /dev/dri" in extra parameters for the Docker application. Quote Link to comment
Raczo Posted December 21, 2018 Share Posted December 21, 2018 (edited) hello i get server disconnected (code: 1006) cant see anything i the ui exept for that error any idea hot to fix it? Edit: was a browser addons fault Edited December 21, 2018 by Raczo Quote Link to comment
NewDisplayName Posted December 22, 2018 Share Posted December 22, 2018 (edited) Normal it makes 1 file out of the input.. but this time, the first iso: GLib-GIO-Message: 11:05:17.603: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications. [autovideoconverter] Starting conversion of '/watch/Feuchtgebiete.2013.GERMAN.COMPLETE.BLURAY-RetailBD/ret-feuchtg-bd.iso' (5f6ae633c378e1323f99af6a71282d9d) using preset 'HQ 1080p30 Surround'... [autovideoconverter] 8 title(s) to process. [autovideoconverter] Processing title 7 (1/8)... it does again multiple files, how to stop that? (or will it combine at the end?) Edited December 22, 2018 by nuhll Quote Link to comment
Djoss Posted December 22, 2018 Author Share Posted December 22, 2018 5 hours ago, nuhll said: Normal it makes 1 file out of the input.. but this time, the first iso: GLib-GIO-Message: 11:05:17.603: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications. [autovideoconverter] Starting conversion of '/watch/Feuchtgebiete.2013.GERMAN.COMPLETE.BLURAY-RetailBD/ret-feuchtg-bd.iso' (5f6ae633c378e1323f99af6a71282d9d) using preset 'HQ 1080p30 Surround'... [autovideoconverter] 8 title(s) to process. [autovideoconverter] Processing title 7 (1/8)... it does again multiple files, how to stop that? (or will it combine at the end?) It's because you have an ISO as source. In the ISO, there are multiple videos. You can adjust the "AUTOMATED_CONVERSION_SOURCE_MIN_DURATION" environment variables to ignore videos other than the main movie. Quote Link to comment
NewDisplayName Posted December 22, 2018 Share Posted December 22, 2018 (edited) Whats a good setting for that? 60min? Do i add it inside the container as a variable? Edited December 22, 2018 by nuhll Quote Link to comment
cybrnook Posted December 22, 2018 Share Posted December 22, 2018 (edited) 14 minutes ago, nuhll said: Whats a good setting for that? 60min? Do i add it inside the container as a variable? You will never find a good balance. Many movies these days will have 10+ duplicate mpls titles all with the same length, just tracks are disordered. So while one of those 10+ tracks is the right one, you will still catch the others as well. Edited December 22, 2018 by cybrnook Quote Link to comment
NewDisplayName Posted December 25, 2018 Share Posted December 25, 2018 Any chance to make him correctly process multiple .VOB files.. he converts all of them seperate.. Quote Link to comment
Djoss Posted December 29, 2018 Author Share Posted December 29, 2018 On 12/25/2018 at 6:49 PM, nuhll said: Any chance to make him correctly process multiple .VOB files.. he converts all of them seperate.. Do you have them in a VIDEO_TS folder? Quote Link to comment
Djoss Posted December 29, 2018 Author Share Posted December 29, 2018 46 minutes ago, nuhll said: no You should provide the whole VIDEO_TS. Like this, HandBrake can process it as a whole disc instead of individual videos. Quote Link to comment
NewDisplayName Posted December 29, 2018 Share Posted December 29, 2018 im not doin anything manual. thats what was provided by automation. Quote Link to comment
CoZ Posted December 31, 2018 Share Posted December 31, 2018 (edited) So I'm doing my first test of this by moving a video file to the "Watch" folder, checked the UnRaid dashboard and can see my CPUs maxing out so I knew it must be working. However, when I load up the docker GUI, I see nothing. So, I guess, there is no way to see the ETA to completion when automatically transcoding videos? Is there some way to set up some sort of notification when the files are done transcoding? Edited December 31, 2018 by CoZ Quote Link to comment
munit85 Posted December 31, 2018 Share Posted December 31, 2018 58 minutes ago, CoZ said: So I'm doing my first test of this by moving a video file to the "Watch" folder, checked the UnRaid dashboard and can see my CPUs maxing out so I knew it must be working. However, when I load up the docker GUI, I see nothing. So, I guess, there is no way to see the ETA to completion when automatically transcoding videos? Is there some way to set up some sort of notification when the files are done transcoding? click on the docker and click logs. It will show you the completed percent as it works along. Quote Link to comment
FieldGenEJ Posted December 31, 2018 Share Posted December 31, 2018 59 minutes ago, CoZ said: So I'm doing my first test of this by moving a video file to the "Watch" folder, checked the UnRaid dashboard and can see my CPUs maxing out so I knew it must be working. However, when I load up the docker GUI, I see nothing. So, I guess, there is no way to see the ETA to completion when automatically transcoding videos? Is there some way to set up some sort of notification when the files are done transcoding? You are able to see the progress if you pull up the log for the docker container. Quote Link to comment
NewDisplayName Posted January 4, 2019 Share Posted January 4, 2019 I know i could limit the dockers cpus, but i dont want to do that. Is there a way to set the handbrake process to a lower priority like in windows? (or the docker itself?) Quote Link to comment
Squid Posted January 4, 2019 Share Posted January 4, 2019 2 hours ago, nuhll said: I know i could limit the dockers cpus, but i dont want to do that. Is there a way to set the handbrake process to a lower priority like in windows? (or the docker itself?) You can easily prioritize one container over another without limiting cores https://forums.unraid.net/topic/57181-real-docker-faq/?page=2#comment-566087 Quote Link to comment
NewDisplayName Posted January 4, 2019 Share Posted January 4, 2019 (edited) 10 minutes ago, Squid said: You can easily prioritize one container over another without limiting cores https://forums.unraid.net/topic/57181-real-docker-faq/?page=2#comment-566087 Its just crazy what you can do today... exactly what im looking for, tho didnt found via googling Oo i just found that cpu pinning. (which i know already) So if i understand it correct it does CPU / 1024 ? 1. If i set c=2 its the lowest number and thus the it would take 2 out of 1024 "CPU power". 2. When i wanna give plex a higher prio, i set it to 1024, which means 100% ?!?! (i dont need to do that tho, bc 1024 is standard, right?) 3. I do put it under extra arguments, right? 4. i guess theres no way to give unraid more power? Much thanks! Edited January 4, 2019 by nuhll Quote Link to comment
Squid Posted January 4, 2019 Share Posted January 4, 2019 2 minutes ago, nuhll said: If i set c=2 its the lowest number and thus the it would take 2 out of 1024 "CPU power". When i wanna give plex a higher prio, i set it to 1024, which means 100% ?!?! Set one to 2, and leave the other alone (defaults to 1024). When both containers require all the cpu, Plex will basically take it all, and only leave the tiny fraction available for handbrake. But, you also have to remember that all containers by default have a priority of 1024, so, assuming that Plex wants it all and another container wants it all, and handbrake wants it all at the same time then Plex and the other container will both split the CPU down the middle and leave a tiny fraction for handbrake. Quote Link to comment
NewDisplayName Posted January 4, 2019 Share Posted January 4, 2019 yeah, i edited my post after thinking about it...^^ I want that handbrake can take all it wants if nothing else needs something. Plex should always be highest prio, but i guess, sicne i never had problems - till handbrake - i dont need to change all the other dockers. Is there such a command for unraid processes? Quote Link to comment
NewDisplayName Posted January 5, 2019 Share Posted January 5, 2019 (edited) To imrove performance i enabled quick sync, and logfile shows its working: [00:40:34] CPU: Intel(R) Core(TM) i3-4370 CPU @ 3.80GHz [00:40:34] - Intel microarchitecture Haswell [00:40:34] - logical processor count: 4 [00:40:34] Intel Quick Sync Video support: yes Still, its about the same FPS and same CPU %... i selected h264 intel qsv. Anything else i need to do? Oo Or is it just that slow...? avg of about 10 fps. I played a little with QP and the speed preset.. didnt change too much Oo (i cant even really say if it change something) Can anyeone suggest good settings for h264 intel qsv, good speed, good quality..? But i guess speed is more important for me then quality. Edited January 6, 2019 by nuhll Quote Link to comment
NewDisplayName Posted January 6, 2019 Share Posted January 6, 2019 (edited) EDIT: I Found the problem... video -> level -> was set to auto -> i changed it to 2 and it works ... now 60-70fps... - up to 100 Anyway, could someone look over my settings or show how what they set it to? ----- obsolete... OKay, it seems like it didnt really took my settings even i saved them and it showed them correctly in GUI. Ive created now a new preset but i get the following error: [01:34:01] qsv_enc_init: using 'hardware (1) via VAAPI' implementation, API: 1.28 libva info: VAEncMiscParameterBufferQualityLevel.quality_level (4) out of range (max 2). ERROR: encqsv: MFXVideoENCODE_EncodeFrameAsync failed (-17) BufferQuality is set to 4 and it can max do 2. Where the f i find these settings? { "AlignAVStart": true, "AudioCopyMask": [ "copy:mp3", "copy:aac", "copy:ac3", "copy:dts" ], "AudioEncoderFallback": "fdk_aac", "AudioLanguageList": [ "deu", "eng" ], "AudioList": [ { "AudioBitrate": 160, "AudioCompressionLevel": -1.0, "AudioDitherMethod": "auto", "AudioEncoder": "fdk_aac", "AudioMixdown": "dpl2", "AudioNormalizeMixLevel": false, "AudioSamplerate": "auto", "AudioTrackDRCSlider": 0.0, "AudioTrackGainSlider": 0.0, "AudioTrackQuality": 1.0, "AudioTrackQualityEnable": false }, { "AudioBitrate": 640, "AudioCompressionLevel": -1.0, "AudioDitherMethod": "auto", "AudioEncoder": "copy:ac3", "AudioMixdown": "none", "AudioNormalizeMixLevel": false, "AudioSamplerate": "auto", "AudioTrackDRCSlider": 0.0, "AudioTrackGainSlider": 0.0, "AudioTrackQuality": -1.0, "AudioTrackQualityEnable": false } ], "AudioSecondaryEncoderMode": true, "AudioTrackSelectionBehavior": "all", "ChapterMarkers": true, "ChildrenArray": [], "Default": false, "FileFormat": "av_mp4", "Folder": false, "FolderOpen": false, "InlineParameterSets": false, "Mp4HttpOptimize": false, "Mp4iPodCompatible": false, "PictureAutoCrop": true, "PictureBottomCrop": 0, "PictureCombDetectCustom": "", "PictureCombDetectPreset": "default", "PictureDARWidth": 0, "PictureDeblock": 0, "PictureDeblockCustom": "qp=0:mode=2", "PictureDeinterlaceCustom": "", "PictureDeinterlaceFilter": "decomb", "PictureDeinterlacePreset": "default", "PictureDenoiseCustom": "", "PictureDenoiseFilter": "off", "PictureDenoisePreset": "", "PictureDenoiseTune": "none", "PictureDetelecine": "off", "PictureDetelecineCustom": "", "PictureForceHeight": 0, "PictureForceWidth": 0, "PictureHeight": 0, "PictureItuPAR": false, "PictureKeepRatio": true, "PictureLeftCrop": 0, "PictureLooseCrop": false, "PictureModulus": 2, "PicturePAR": "auto", "PicturePARHeight": 720, "PicturePARWidth": 853, "PictureRightCrop": 0, "PictureRotate": "disable=1", "PictureSharpenCustom": "", "PictureSharpenFilter": "off", "PictureSharpenPreset": "", "PictureSharpenTune": "", "PictureTopCrop": 0, "PictureWidth": 0, "PresetDescription": "High quality H.264 video (up to 1080p30), AAC stereo audio, and Dolby Digital (AC-3) surround audio, in an MP4 container.", "PresetName": "h264intelqsv", "SubtitleAddCC": false, "SubtitleAddForeignAudioSearch": true, "SubtitleAddForeignAudioSubtitle": true, "SubtitleBurnBDSub": true, "SubtitleBurnBehavior": "foreign", "SubtitleBurnDVDSub": true, "SubtitleLanguageList": [ "deu", "eng" ], "SubtitleTrackSelectionBehavior": "all", "Type": 1, "UsesPictureFilters": true, "UsesPictureSettings": 2, "VideoAvgBitrate": 9000, "VideoColorMatrixCode": 0, "VideoEncoder": "qsv_h264", "VideoFramerate": "auto", "VideoFramerateMode": "vfr", "VideoGrayScale": false, "VideoLevel": "auto", "VideoOptionExtra": "", "VideoPreset": "balanced", "VideoProfile": "main", "VideoQSVAsyncDepth": 4, "VideoQSVDecode": false, "VideoQualitySlider": 18.0, "VideoQualityType": 2, "VideoScaler": "swscale", "VideoTune": "", "VideoTurboTwoPass": false, "VideoTwoPass": true, "x264Option": "", "x264UseAdvancedOptions": false } I tried to set the only 4 to 2, which didnt helped (videoqsvasyndepth) Edited January 6, 2019 by nuhll Quote Link to comment
Djoss Posted January 6, 2019 Author Share Posted January 6, 2019 1 hour ago, nuhll said: EDIT: I Found the problem... video -> level -> was set to auto -> i changed it to 2 and it works ... now 60-70fps... - up to 100 Anyway, could someone look over my settings or show how what they set it to? ----- obsolete... OKay, it seems like it didnt really took my settings even i saved them and it showed them correctly in GUI. Ive created now a new preset but i get the following error: [01:34:01] qsv_enc_init: using 'hardware (1) via VAAPI' implementation, API: 1.28 libva info: VAEncMiscParameterBufferQualityLevel.quality_level (4) out of range (max 2). ERROR: encqsv: MFXVideoENCODE_EncodeFrameAsync failed (-17) BufferQuality is set to 4 and it can max do 2. Where the f i find these settings? { "AlignAVStart": true, "AudioCopyMask": [ "copy:mp3", "copy:aac", "copy:ac3", "copy:dts" ], "AudioEncoderFallback": "fdk_aac", "AudioLanguageList": [ "deu", "eng" ], "AudioList": [ { "AudioBitrate": 160, "AudioCompressionLevel": -1.0, "AudioDitherMethod": "auto", "AudioEncoder": "fdk_aac", "AudioMixdown": "dpl2", "AudioNormalizeMixLevel": false, "AudioSamplerate": "auto", "AudioTrackDRCSlider": 0.0, "AudioTrackGainSlider": 0.0, "AudioTrackQuality": 1.0, "AudioTrackQualityEnable": false }, { "AudioBitrate": 640, "AudioCompressionLevel": -1.0, "AudioDitherMethod": "auto", "AudioEncoder": "copy:ac3", "AudioMixdown": "none", "AudioNormalizeMixLevel": false, "AudioSamplerate": "auto", "AudioTrackDRCSlider": 0.0, "AudioTrackGainSlider": 0.0, "AudioTrackQuality": -1.0, "AudioTrackQualityEnable": false } ], "AudioSecondaryEncoderMode": true, "AudioTrackSelectionBehavior": "all", "ChapterMarkers": true, "ChildrenArray": [], "Default": false, "FileFormat": "av_mp4", "Folder": false, "FolderOpen": false, "InlineParameterSets": false, "Mp4HttpOptimize": false, "Mp4iPodCompatible": false, "PictureAutoCrop": true, "PictureBottomCrop": 0, "PictureCombDetectCustom": "", "PictureCombDetectPreset": "default", "PictureDARWidth": 0, "PictureDeblock": 0, "PictureDeblockCustom": "qp=0:mode=2", "PictureDeinterlaceCustom": "", "PictureDeinterlaceFilter": "decomb", "PictureDeinterlacePreset": "default", "PictureDenoiseCustom": "", "PictureDenoiseFilter": "off", "PictureDenoisePreset": "", "PictureDenoiseTune": "none", "PictureDetelecine": "off", "PictureDetelecineCustom": "", "PictureForceHeight": 0, "PictureForceWidth": 0, "PictureHeight": 0, "PictureItuPAR": false, "PictureKeepRatio": true, "PictureLeftCrop": 0, "PictureLooseCrop": false, "PictureModulus": 2, "PicturePAR": "auto", "PicturePARHeight": 720, "PicturePARWidth": 853, "PictureRightCrop": 0, "PictureRotate": "disable=1", "PictureSharpenCustom": "", "PictureSharpenFilter": "off", "PictureSharpenPreset": "", "PictureSharpenTune": "", "PictureTopCrop": 0, "PictureWidth": 0, "PresetDescription": "High quality H.264 video (up to 1080p30), AAC stereo audio, and Dolby Digital (AC-3) surround audio, in an MP4 container.", "PresetName": "h264intelqsv", "SubtitleAddCC": false, "SubtitleAddForeignAudioSearch": true, "SubtitleAddForeignAudioSubtitle": true, "SubtitleBurnBDSub": true, "SubtitleBurnBehavior": "foreign", "SubtitleBurnDVDSub": true, "SubtitleLanguageList": [ "deu", "eng" ], "SubtitleTrackSelectionBehavior": "all", "Type": 1, "UsesPictureFilters": true, "UsesPictureSettings": 2, "VideoAvgBitrate": 9000, "VideoColorMatrixCode": 0, "VideoEncoder": "qsv_h264", "VideoFramerate": "auto", "VideoFramerateMode": "vfr", "VideoGrayScale": false, "VideoLevel": "auto", "VideoOptionExtra": "", "VideoPreset": "balanced", "VideoProfile": "main", "VideoQSVAsyncDepth": 4, "VideoQSVDecode": false, "VideoQualitySlider": 18.0, "VideoQualityType": 2, "VideoScaler": "swscale", "VideoTune": "", "VideoTurboTwoPass": false, "VideoTwoPass": true, "x264Option": "", "x264UseAdvancedOptions": false } I tried to set the only 4 to 2, which didnt helped (videoqsvasyndepth) I think that VAEncMiscParameterBufferQualityLevel.quality_level is related to the "VideoPreset" setting. When you change the video encoder of a preset, try to just toggle the value of settings. I've seen issues where some values were not reset correctly for the new encoder. Quote Link to comment
NewDisplayName Posted January 6, 2019 Share Posted January 6, 2019 Just now, Djoss said: I think that VAEncMiscParameterBufferQualityLevel.quality_level is related to the "VideoPreset" setting. When you change the video encoder of a preset, try to just toggle the value of settings. I've seen issues where some values were not reset correctly for the new encoder. No, it was video -> level, this is standard to auto, if i set it to 2 it works... any recomm for settings? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.