knex666 Posted April 16, 2019 Author Share Posted April 16, 2019 if you can tell me a way how to do that and where you found that i´ll try to get this to work. Quote Link to comment
torch2k Posted April 17, 2019 Share Posted April 17, 2019 does this support dual pane file browsing? would love to use this for moving files around. Quote Link to comment
knex666 Posted April 19, 2019 Author Share Posted April 19, 2019 On 4/17/2019 at 7:36 PM, torch2k said: does this support dual pane file browsing? would love to use this for moving files around. Thats not was FileBrowser was made for. Have a look at Krusader docker. Quote Link to comment
ceyo14 Posted May 16, 2019 Share Posted May 16, 2019 This seems to have stopped working with 6.7.0, I have deleted everything and reinstalled and still not working. states: standard_init_linux.go:207: exec user process caused "no such file or directory" Quote Link to comment
leejbarker Posted May 16, 2019 Share Posted May 16, 2019 9 minutes ago, ceyo14 said: This seems to have stopped working with 6.7.0, I have deleted everything and reinstalled and still not working. states: standard_init_linux.go:207: exec user process caused "no such file or directory" It did this to me.... I noticed there was an update for File Browser, updated that and now it works fine. Quote Link to comment
ceyo14 Posted May 16, 2019 Share Posted May 16, 2019 (edited) As I mentioned. I reinstalled after deleting everything and still won't start... Edited May 16, 2019 by ceyo14 Quote Link to comment
rallos_hoo Posted May 16, 2019 Share Posted May 16, 2019 53 minutes ago, ceyo14 said: As I mentioned. I reinstalled after deleting everything and still won't start... Same issue with you. can any one do us a favor? Quote Link to comment
leejbarker Posted May 17, 2019 Share Posted May 17, 2019 Actually, mine has stopped working again! It definitely stopped and started working again though, so not sure what's going on here. Quote Link to comment
alturismo Posted May 17, 2019 Share Posted May 17, 2019 (edited) its the latest docker updates, every 2nd is working ... the last one 9 hours ago is working again. you can also just use a tag wich works for you ... just as note Edited May 17, 2019 by alturismo updates with tags Quote Link to comment
leejbarker Posted May 17, 2019 Share Posted May 17, 2019 27 minutes ago, alturismo said: its the latest docker updates, every 2nd is working ... the last one 9 hours ago is working again. you can also just use a tag wich works for you ... just as note Agreed, working again Quote Link to comment
knex666 Posted May 18, 2019 Author Share Posted May 18, 2019 Sorry, think this is due to auto compilation. I am trying my best to get everything working again. Dont have a clue now. Cheers Quote Link to comment
Aerodb Posted May 30, 2019 Share Posted May 30, 2019 So the admin/admin isn't working for me and im pretty sure its because that i must have changed the password a while back... anyone know how to reset back to default password? Quote Link to comment
knex666 Posted May 31, 2019 Author Share Posted May 31, 2019 14 hours ago, Aerodb said: So the admin/admin isn't working for me and im pretty sure its because that i must have changed the password a while back... anyone know how to reset back to default password? Think you have to remove the database to setup FileBrowser new. Quote Link to comment
golli53 Posted July 25, 2019 Share Posted July 25, 2019 Getting "no such device" and immediate exit with every version - have tried all the way back to 2.07 Quote Link to comment
knex666 Posted August 4, 2019 Author Share Posted August 4, 2019 On 7/26/2019 at 12:18 AM, golli53 said: Getting "no such device" and immediate exit with every version - have tried all the way back to 2.07 Where do you get this error, while building/starting the container. Can you post a screenshot plz. Cheers Quote Link to comment
unMaxe Posted August 5, 2019 Share Posted August 5, 2019 Works fine but now i try to set up https. Is this possible to combinine with "letsencrypt"-docker (which have reverse proxy included). I tried to setup in /letsencrypt/nginx/proxy-confs but sadly there are no sample .conf for FileBrowser. Maybe someone have allready config this method? Quote Link to comment
knex666 Posted August 6, 2019 Author Share Posted August 6, 2019 19 hours ago, unMaxe said: Works fine but now i try to set up https. Is this possible to combinine with "letsencrypt"-docker (which have reverse proxy included). I tried to setup in /letsencrypt/nginx/proxy-confs but sadly there are no sample .conf for FileBrowser. Maybe someone have allready config this method? I am using letsencrypt as well: maybe you could go like this: 1.st you need a subdomain like filebrowser.yourdomain.com (yourdomain.com/filebrowser will not work) 2.nd put a proxy pass in your / configuration for your subdomain 3.rd have fun! location / { proxy_pass http://192.168.1.24:8123/; proxy_buffering off; proxy_http_version 1.1; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $http_connection; access_log off; } 1 Quote Link to comment
alturismo Posted August 7, 2019 Share Posted August 7, 2019 or to use as subfolder (i had to dig a little to find) take a look at your filebrowser.json sample here to use as my.domain.com/files in filebrowser.json "baseURL": "/files", nginx location ^~ /files/ { auth_basic off; allow all; # Allow all to see content include /config/nginx/proxy.conf; proxy_pass http://192.168.1.2:40080/files/; proxy_buffering off; access_log off; } Quote Link to comment
NeoJoris Posted December 3, 2019 Share Posted December 3, 2019 On 8/6/2019 at 6:50 PM, knex666 said: I am using letsencrypt as well: maybe you could go like this: 1.st you need a subdomain like filebrowser.yourdomain.com (yourdomain.com/filebrowser will not work) 2.nd put a proxy pass in your / configuration for your subdomain 3.rd have fun! location / { proxy_pass http://192.168.1.24:8123/; proxy_buffering off; proxy_http_version 1.1; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $http_connection; access_log off; } Can you post this full .conf? I added that to mine, but it doesn't seem to work. ("Welcome to our server" message) My other reverse proxy's are working thanks Quote Link to comment
mikeydk Posted January 12, 2020 Share Posted January 12, 2020 I am having some problems getting this to run. I took the filebrowser.json and put it in /mnt/user/appdata/filebrowser/filebrowser.json But when I start the docker and tries to access the webui, I just get 3 dots fading from left to right. Log file contain this 2020/01/12 16:35:14 Using config file: /.filebrowser.json 2020/01/12 16:35:14 Listening on [::]:80 No matter what port I set in the json file, it continue to listen to port 80 too. Opening console I am getting a fast flash of an error containing something with $PATH. It is flashing so fast I can't read it. Quote Link to comment
mikeydk Posted January 12, 2020 Share Posted January 12, 2020 (edited) I got it working. To get it to work I had to change Network Type to Bridge, and then add a port. After doing this the WebUI option no longer direct to the right address, but typing the address in manually works. Scrap that... F5 and it is back to the 3 dots again. Edited January 12, 2020 by mikeydk Quote Link to comment
knex666 Posted January 12, 2020 Author Share Posted January 12, 2020 So If you are shure you put in the config to the right place the only think that comes in my mind Now is the Network Adapter. Try br0 with an IP of your subnet. Host can work as well bridge will be proxy through unraid that can cause a Problem. Good luck! Quote Link to comment
windiz Posted January 13, 2020 Share Posted January 13, 2020 (edited) Hi everyone! I'm new at the forum but I have 9 years experience of Unraid. Sorry for my bad English. FileBrowser container seems great! Basic functionality seems to be working 100%. Although I would like to add reCaptcha authentication on login. Documentation says that this can be added with this command: filebrowser config set --auth.method=json --recaptcha.key site-key --recaptcha.secret private-key I tried to run this command on Unraid terminal but it always returns timeout: root@192:~# docker exec -ti FileBrowser /filebrowser config set --auth.method=json --recaptcha.key site-key --recaptcha.secret private-key 2020/01/13 05:53:22 timeout I get timeout from also from other commands if trying to change config. I can't even print current config using "config cat" command. Version command seems to be working: root@192:~# docker exec -ti FileBrowser /filebrowser version File Browser v2.1.0/6ce44f7 I found this thread with same problem: https://github.com/filebrowser/filebrowser/issues/627 There is comment: "You can only either be serving File Browser or execute commands. You can't change the database while its running." So I think that to change config with commands it is needed to stop the Filebrowser first and then start it again. However I think that this can't be done since this docker container hasn't got bash/shell? My config: Host path 1 (shares): Container Path: /srv /mnt/user/filebrowser_share/ Host path 2 (database.db): /mnt/user/appdata/filebrowser/ Container Path: /db/ Config (additional mapping for .filebrowser.json): /mnt/user/appdata/filebrowser_config/.filebrowser.json Container Path: /.filebrowser.json Any help appreciated! Thanks also for great work with this docker container. Edited January 13, 2020 by windiz 1 Quote Link to comment
alturismo Posted January 13, 2020 Share Posted January 13, 2020 looks like its due the latest update from the source and now its closed ... reverting back to and all is good, sadly the dark theme came in 2.1 Quote Link to comment
tonyuh Posted March 7, 2020 Share Posted March 7, 2020 Great docker! I have a little question regarding multiple paths for a user, I want each user to be able to access a shared folder and a private folder. I see 2 possible way of doing it, first the scope way, is it possible to have multiple scopes? I tried comma and semicolon separated but they don't work. Second way is from the rules section, but I can't figure out how to use it. I tried "allow" and put path with and without "/" and nothing seems to be happenning (nothing is filtered out). Can anyone point me in the right direction please! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.