aptalca Posted March 24, 2019 Share Posted March 24, 2019 16 minutes ago, comet424 said: ok so basiclly you mean its like windows mapping network Share Files aka Port 1194 share it as Drive G: aka 1200 and you do this in Bridge and in the GUI like this? i edit the the 1200 back to 1194 in the container you call it other way around Quote Link to comment
comet424 Posted March 24, 2019 Share Posted March 24, 2019 what goes the other way around the 1194 1200 if so then i have to change container back to 1200 and the GUI to 1194? is that what you mean Quote Link to comment
aptalca Posted March 24, 2019 Share Posted March 24, 2019 7 minutes ago, comet424 said: what goes the other way around the 1194 1200 if so then i have to change container back to 1200 and the GUI to 1194? is that what you mean you currently have the container set to 1200, host set to 1194 172.17.0.2 is the container IP, 192.168.1.8 is your host IP Quote Link to comment
aptalca Posted March 24, 2019 Share Posted March 24, 2019 PSA. It seems openvpn pushed another broken bin, tagged 2.7.3 I get the same error with it as I did with the previously pulled 2.7.2 While they/us try to figure it out, you can change your image to "linuxserver/openvpn-as:2.6.1-ls11" and it should work 1 7 Quote Link to comment
comet424 Posted March 24, 2019 Share Posted March 24, 2019 ok so the Container is the GUI and the HOST is the config settings when i Hit EDIT right so then i change host back to 1200 and also change the GUI login as ADmin and set it back to 1194 right? i had to re read 2 messages ago 5 times to try to think it in my head Quote Link to comment
comet424 Posted March 24, 2019 Share Posted March 24, 2019 guess ill have to re try this week.. my sisters internet is down again so she needs internet technican to test the lines or replace modem so i cant edit it now anyways... so ill retry again when internet is back frustrating i tell ya Quote Link to comment
Ryoko Posted March 25, 2019 Share Posted March 25, 2019 (edited) 3 hours ago, aptalca said: you can change your image to "linuxserver/openvpn-as:2.6.1-ls11" and it should work Sorry, quick question, how does one go about doing this? (also having the same issue as the previous "update") EDIT- I removed the image, then tried docker pull linuxserver/openvpn-as:2.6.1-ls11 Which seemed like it gave me the previous version (just fumbling about using google here). However, still have the same issue. EDIT 2- Removed that image, added the container again via the unRAID GUI, changed the repository to "linuxserver/openvpn-as:2.6.1-ls11", worked like a charm! Back up and running ^_^v Edited March 25, 2019 by ryoko227 added information Quote Link to comment
aptalca Posted March 25, 2019 Share Posted March 25, 2019 3 hours ago, ryoko227 said: Sorry, quick question, how does one go about doing this? (also having the same issue as the previous "update") EDIT- I removed the image, then tried docker pull linuxserver/openvpn-as:2.6.1-ls11 Which seemed like it gave me the previous version (just fumbling about using google here). However, still have the same issue. EDIT 2- Removed that image, added the container again via the unRAID GUI, changed the repository to "linuxserver/openvpn-as:2.6.1-ls11", worked like a charm! Back up and running ^_^v That's right, open the container settings and modify the repository entry (which is the docker image) 1 2 Quote Link to comment
Casper8790 Posted March 25, 2019 Share Posted March 25, 2019 Hello, I had installed the openvpn docker using Spaceinvader One's tutorial and everything was fine untill yesterday and can't find what is wrong... I saw some people had the same issue on this forum but the fix given is not working for me 😞 I am new to unraid or networking so my knowledge in all this is quite limited. Here is my problem and my setup : I Can not access WebUI, i get a "ERR_CONNECTION_REFUSED" message https://imgur.com/a/sfJmf7h https://pastebin.com/K8UDPtyx https://pastebin.com/xh4LhU7j https://imgur.com/a/zbqeCeG What i tried doing : - Remove container / delete appdata files / pull fresh app again - Install to a new /config folder - Redeploying container in bridge mode and switching to eth0 - appdata restore with CA Backup/Restore plugin Quote Link to comment
trurl Posted March 25, 2019 Share Posted March 25, 2019 2 hours ago, Casper8790 said: What i tried doing Did you try installing an earlier version as discussed in the posts just above yours? Quote Link to comment
Casper8790 Posted March 25, 2019 Share Posted March 25, 2019 (edited) 2 hours ago, trurl said: Did you try installing an earlier version as discussed in the posts just above yours? Ok did that but didn't work What i found though is that i could delete the openvpn-as template when selecting it in the Add Container window... Did that, pulled a fresh container and it worked again ! Now i just can't seem to delete that admin user... Im starting to think i should stop touching technology EDIT ----- Couldnt delete the admin user threw the GUI Found a fix in an earlier post... # docker exec -it openvpn-as deluser admin Edited March 25, 2019 by Casper8790 Quote Link to comment
Titopr21 Posted March 25, 2019 Share Posted March 25, 2019 On 3/22/2019 at 10:08 PM, comet424 said: im getting frustrated .. i cant delete 1194 i added a port to AS and still wont add port i googled docker ports and that article was usless it doesnt say anyhing how to erase 1194 and replace it with 1200 https://lime-technology.com/wp/docker-guide/ so im really getting frustrated i want 1194 erased and 1200 put in its place.. in host mode because Bridge mode doesnt work at all gui is disabled 12 you have bond instead of bond0 Quote Link to comment
comet424 Posted March 26, 2019 Share Posted March 26, 2019 (edited) ya i ment to tell you i had fixed that set it to bond0 after i sent pic sorry about that ok i re read things again i confused the 172.x.x. container and you said the host is my 192.168.1.8 is it supposed to go 192.168.1.8:1200 <-> 172.x.x.x:1194 or 192.168.1.8:1194 <->172.x.x.x:1200 or what is it supposed to look like i still dont have internet to my sisters server so i cant edit but what should it look like so i can edit it and do i leave the gui to 1200 udp or did i need to change it back to 1194.. i told her to contact her ISP to get a tech out but she being stubborn.. but if you could even edit my photo(s) and show what it should look like.. as im a visual learner nto so much a words learner.. with dislexia and learning disablity i learn better with pictures instead of trying to explain it if that is ok with you guys 🙂 Edited March 26, 2019 by comet424 Quote Link to comment
hundsboog Posted March 26, 2019 Share Posted March 26, 2019 On 3/24/2019 at 11:52 PM, aptalca said: PSA. It seems openvpn pushed another broken bin, tagged 2.7.3 I get the same error with it as I did with the previously pulled 2.7.2 While they/us try to figure it out, you can change your image to "linuxserver/openvpn-as:2.6.1-ls11" and it should work I had the same problem and this fixed it! Maybe we should stick it somewhere more prominent! Thanks to @aptalca 2 Quote Link to comment
Coolsaber57 Posted March 26, 2019 Share Posted March 26, 2019 On 3/24/2019 at 6:52 PM, aptalca said: PSA. It seems openvpn pushed another broken bin, tagged 2.7.3 I get the same error with it as I did with the previously pulled 2.7.2 While they/us try to figure it out, you can change your image to "linuxserver/openvpn-as:2.6.1-ls11" and it should work Thank you for the fix, it works! Quote Link to comment
Rex099 Posted March 26, 2019 Share Posted March 26, 2019 Ty for the info guys about the using old builds. I didn't know that was possible. Lear new stuff everyday. Quote Link to comment
jondak Posted March 27, 2019 Share Posted March 27, 2019 Thank you aptalca worked by pulling a older version: linuxserver/openvpn-as:2.6.1-ls11 Quote Link to comment
btack Posted March 27, 2019 Share Posted March 27, 2019 (edited) So I have been running linuxserver-as openvpn for well over a year without issue. updated this morning and now everything is messed up. I read about pulling an old version but that doesnt seem no fix anything can't launch the web UI just keep getting a refusal to connect and also can't connect remotely. tried installing 2.6.1-ls11 ls10 ls2 same issue with all of them. I have removed the image at a loss right now any help would be appreciated heading out of town tomorrow evening and would like to have this working by then. So deleting the config folder and the image and starting over worked. Thanks Brian Edited March 27, 2019 by btack Quote Link to comment
daemon1999 Posted March 27, 2019 Share Posted March 27, 2019 On 3/24/2019 at 5:52 PM, aptalca said: PSA. It seems openvpn pushed another broken bin, tagged 2.7.3 I get the same error with it as I did with the previously pulled 2.7.2 While they/us try to figure it out, you can change your image to "linuxserver/openvpn-as:2.6.1-ls11" and it should work This is why I love the unraid community. I wait to upgrade, and my issues are already addressed in the forums when I do. This fixed it for me. Thanks, @aptalca❤️ Quote Link to comment
daemon1999 Posted March 27, 2019 Share Posted March 27, 2019 2 hours ago, btack said: So I have been running linuxserver-as openvpn for well over a year without issue. updated this morning and now everything is messed up. I read about pulling an old version but that doesnt seem no fix anything can't launch the web UI just keep getting a refusal to connect and also can't connect remotely. tried installing 2.6.1-ls11 ls10 ls2 same issue with all of them. I have removed the image at a loss right now any help would be appreciated heading out of town tomorrow evening and would like to have this working by then. So deleting the config folder and the image and starting over worked. Thanks Brian Yeah remove your existing image. then go click add container on the docker page. click on the template and go down to your user templates... Then click on the openvpn one. Then go to the repository line and change it to linuxserver/openvpn-as:2.6.1-ls11 . That is literally all I had to do. 1 Quote Link to comment
markpeo Posted March 27, 2019 Share Posted March 27, 2019 No need to remove and re-add the docker image. Jst edit your docker, change the repository and then hit apply. Job Done. 1 Quote Link to comment
Everend Posted March 28, 2019 Share Posted March 28, 2019 So does this mean that I should NOT use CA Auto Update Applications to update the docker as the new version comes out? My VPN refused connection with Monday's update but changing the repository as noted above fixed it. Quote Link to comment
Teknoclown Posted March 28, 2019 Share Posted March 28, 2019 (edited) My VPN into my unRaid server worked perfectly fine for the last year. I could connect using the client and I had no issues. Recently, the connections has been failing, regardless of which client I use. I am currently overseas for the military and am unable to physically access my server. I am able to remotely log into my router. Additionally, I am able to SSH into my server's command line. All other services work (PLEX, Sonar, ETC). I can't administer my server without access. Forwarding ports on my router also works, as I can access SONAR and RADAR remotely using this method. I have port 1194 (UDP) forwarded to my servers internal IP address from the router. Additionally, I have port 943 (TCP) forwarded as well (I saw this on the OpenVPN help page). I an using No-IP and that seems to work correctly. Additionally my Router is configured with the appropriate no-IP info. The log file indicates "server Poll timeout, trying next remote entry" Additionally, when utilizing TunnelBlick and looking at the logs, I get the following errors: 2019-03-28 11:50:58 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) 2019-03-28 11:50:58 TLS Error: TLS handshake failed This access server was built using SpaceInvaderOne's video and worked quite well. I have the .OVPN config file and I get the same results regardless of which client I am using. Any help would be appreciated. Looking further into the Forums, it seems as if there was a bad build of OpenVPN-AS pushed. Is there anyway to change which repository is being used utilizing the command line? Dan Edited March 28, 2019 by Teknoclown Quote Link to comment
hundsboog Posted March 28, 2019 Share Posted March 28, 2019 5 hours ago, Everend said: So does this mean that I should NOT use CA Auto Update Applications to update the docker as the new version comes out? My VPN refused connection with Monday's update but changing the repository as noted above fixed it. I would not use this, when you need it with high priority. The VPN is for me a key component and woud exclude it from auto updating. Nevertheless should you stay informed about security issues of the vpn container and update it when you safely know, that the update is ok and properly working. Quote Link to comment
trurl Posted March 28, 2019 Share Posted March 28, 2019 3 hours ago, Teknoclown said: Looking further into the Forums, it seems as if there was a bad build of OpenVPN-AS pushed. Is there anyway to change which repository is being used utilizing the command line? I have merged your thread with the correct support thread. For future reference, you can always go directly to the correct support thread for any of your dockers by simply clicking on its icon and selecting Support. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.