vmonjo Posted June 10, 2023 Share Posted June 10, 2023 Hi, Here you have: nvidia-smi -q -x -g 0 | grep clocks_ <clocks_event_reasons> <clocks_event_reason_gpu_idle>Not Active</clocks_event_reason_gpu_idle> <clocks_event_reason_applications_clocks_setting>Not Active</clocks_event_reason_applications_clocks_setting> <clocks_event_reason_sw_power_cap>Not Active</clocks_event_reason_sw_power_cap> <clocks_event_reason_hw_slowdown>Not Active</clocks_event_reason_hw_slowdown> <clocks_event_reason_hw_thermal_slowdown>Not Active</clocks_event_reason_hw_thermal_slowdown> <clocks_event_reason_hw_power_brake_slowdown>Not Active</clocks_event_reason_hw_power_brake_slowdown> <clocks_event_reason_sync_boost>Not Active</clocks_event_reason_sync_boost> <clocks_event_reason_sw_thermal_slowdown>Not Active</clocks_event_reason_sw_thermal_slowdown> <clocks_event_reason_display_clocks_setting>Not Active</clocks_event_reason_display_clocks_setting> </clocks_event_reasons> Quote Link to comment
SimonF Posted June 10, 2023 Share Posted June 10, 2023 43 minutes ago, vmonjo said: Hi, Here you have: nvidia-smi -q -x -g 0 | grep clocks_ <clocks_event_reasons> <clocks_event_reason_gpu_idle>Not Active</clocks_event_reason_gpu_idle> <clocks_event_reason_applications_clocks_setting>Not Active</clocks_event_reason_applications_clocks_setting> <clocks_event_reason_sw_power_cap>Not Active</clocks_event_reason_sw_power_cap> <clocks_event_reason_hw_slowdown>Not Active</clocks_event_reason_hw_slowdown> <clocks_event_reason_hw_thermal_slowdown>Not Active</clocks_event_reason_hw_thermal_slowdown> <clocks_event_reason_hw_power_brake_slowdown>Not Active</clocks_event_reason_hw_power_brake_slowdown> <clocks_event_reason_sync_boost>Not Active</clocks_event_reason_sync_boost> <clocks_event_reason_sw_thermal_slowdown>Not Active</clocks_event_reason_sw_thermal_slowdown> <clocks_event_reason_display_clocks_setting>Not Active</clocks_event_reason_display_clocks_setting> </clocks_event_reasons> Just release 2023.06.10 with fixes. Quote Link to comment
SimonF Posted June 10, 2023 Share Posted June 10, 2023 On 6/2/2023 at 5:31 PM, ezek1el3000 said: nvidia_smi_log.txt 42.23 kB · 3 downloads 2023.06.10 should fix this for you. Quote Link to comment
doctortt Posted June 13, 2023 Share Posted June 13, 2023 On 6/9/2023 at 7:41 AM, SimonF said: There was an issue with cookie name that stores the location not being unique. I have created a fix in 2023.06.09 Thanks. I can confirm that this issue has been resolved in the latest version of the plug-in. Quote Link to comment
Zeragonii Posted June 16, 2023 Share Posted June 16, 2023 Hi, how soon can we expect an update for this to be compatible with 6.12 out the box? Thanks for your fantastic work! Quote Link to comment
dopeytree Posted June 16, 2023 Share Posted June 16, 2023 30 minutes ago, Zeragonii said: Hi, how soon can we expect an update for this to be compatible with 6.12 out the box? Thanks for your fantastic work! 6.12 - There is another plugin called 'GPU STATISTICS' install that and remove 'GPU Stat' 1 1 Quote Link to comment
SimonF Posted June 16, 2023 Share Posted June 16, 2023 2 hours ago, Zeragonii said: Hi, how soon can we expect an update for this to be compatible with 6.12 out the box? Thanks for your fantastic work! Install my version from app store 2 1 Quote Link to comment
Zeragonii Posted June 16, 2023 Share Posted June 16, 2023 6 hours ago, SimonF said: Install my version from app store Yeah I'm a total moron, I was typing in "gpustat" wondering why it wasnt showing up. Typed in "gpu statistics" and hey presto.. Thanks hahaha! Quote Link to comment
SimonF Posted June 16, 2023 Share Posted June 16, 2023 30 minutes ago, Zeragonii said: Yeah I'm a total moron, I was typing in "gpustat" wondering why it wasnt showing up. Typed in "gpu statistics" and hey presto.. Thanks hahaha! Glad you have it working now. Quote Link to comment
ezek1el3000 Posted June 16, 2023 Share Posted June 16, 2023 On 6/10/2023 at 2:46 PM, SimonF said: 2023.06.10 should fix this for you. Thank you ! Quote Link to comment
craigr Posted June 17, 2023 Share Posted June 17, 2023 (edited) Thanks for this cool plugin. I just updated it yesterday to the newest version. Minor issue(s), The Power Draw graph is always at 100% no matter the amount of power being used by the Intel GPU. The numbers in watts change next to the graph, but the graph always stays at 100%. Also, the Blitter Load never seems to change. Is that measurable on my system? SuperMicro X11SCZ-F, Xeon E-2288G, with unRAID 6.12.0. GPU Statistics 2023.06.10. root@unRAID:~# timeout -k .500 .400 intel_gpu_top -J -s 250 { "period": { "duration": 14.276773, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 0.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 75.122702, "unit": "W" }, "imc-bandwidth": { "reads": 5214.525316, "writes": 1257.441683, "unit": "MiB/s" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } { "period": { "duration": 262.660651, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 11.421581, "unit": "irq/s" }, "rc6": { "value": 0.000000, "unit": "%" }, "power": { "GPU": 0.004647, "Package": 37.973180, "unit": "W" }, "imc-bandwidth": { "reads": 5000.416753, "writes": 611.634141, "unit": "MiB/s" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } }root@unRAID:~# root@unRAID:~# cd /usr/local/emhttp/plugins/gpustat/ && php ./gpustatus.php Array ( [code] => 200 [message] => Configuration file contains invalid settings. [extra] => ) root@unRAID:/usr/local/emhttp/plugins/gpustat# MULTIGPU = "00:02.0" TEMPFORMAT = "C" UIREFRESH = 1 UIREFRESHINT = 1000 DISPCLOCKS = 1 DISPPCIUTIL = 1 DISPPWRDRAW = 1 DISPPWRSTATE = 1 DISPMEMUTIL = 0 DISPTEMP = 0 DISPFAN = 0 DISPENCDEC = 0 DISPTHROTTLE = 0 DISPSESSIONS = 0 DISP3DRENDER = 1 DISPBLITTER = 1 DISPVIDEO = 1 DISPVIDENH = 1 DISPINTERRUPT = 1 DISPPWRDRWSEL = "GPU" DISPEVENT = 0 DISPVERTEX = 0 DISPTEXTURE = 0 DISPSHADEREXP = 0 DISPSEQUENCER = 0 DISPSHADERINTER = 0 DISPSCANCON = 0 DISPPRIMASSEM = 0 DISPDEPTHBLK = 0 DISPCOLORBLK = 0 DISPGFXTRANS = 0 MULTIGPUJSON = "%7B%2200%3A02.0%22%3A%7B%22id%22%3A%2200%3A02.0%22%2C%22model%22%3A%22Coffee+Lake-S+GT2+%5BUHD+Graphics+P630%5D%22%2C%22vendor%22%3A%22intel%22%2C%22guid%22%3A%220000%3A00%3A02.0%22%7D%7D" Thanks again! Edited June 17, 2023 by craigr Quote Link to comment
SimonF Posted June 17, 2023 Share Posted June 17, 2023 11 minutes ago, craigr said: root@unRAID:~# cd /usr/local/emhttp/plugins/gpustat/ && php ./gpustatus.php Array ( [code] => 200 [message] => Configuration file contains invalid settings. [extra] => ) root@unRAID:/usr/local/emhttp/plugins/gpustat# You need to look at gpustatusmulti.php for > 6.12 I do create a json file in /tmp/ with the values being passed to the panel. Will look at the bar. root@computenode:/mnt/user/appdata/tasmotapm-unraid# cat /tmp/gpu* Time = Sat, 17 Jun 2023 07:14:46 +0100 {"00:02.0":{"clock":0,"fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"0W","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"0%","vendor":"Intel","name":"AlderLake-S GT1","3drender":"0%","blitter":"0%","interrupts":0,"powerutil":"0%","video":"0%","videnh":"0%","panel":1},"09:00.0":{"clock":"324","fan":"30%","memclock":"324","memutil":"0%","memused":"1","power":"8W","powermax":"87","rxutil":"N\/A","txutil":"N\/A","temp":"37 \u00b0C","tempmax":"101 \u00b0C","util":"0%","vendor":"NVIDIA","name":"Quadro K4000","clockmax":"810","memclockmax":"2808","memtotal":"3018","encutil":"0%","decutil":"0%","pciemax":250,"perfstate":"P8","throttled":"Yes","thrtlrsn":" (gpu_idle)","pciegen":1,"pciegenmax":2,"pciewidth":1,"pciewidthmax":16,"sessions":0,"uuid":"GPU-ef6c0299-f1bc-7b5c-5291-7cd1a012f8bd","plexusing":false,"plexmem":0,"plexcount":0,"jellyfinusing":false,"jellyfinmem":0,"jellyfincount":0,"handbrakeusing":false,"handbrakemem":0,"handbrakecount":0,"embyusing":false,"embymem":0,"embycount":0,"tdarrusing":false,"tdarrmem":0,"tdarrcount":0,"unmanicusing":false,"unmanicmem":0,"unmaniccount":0,"dizquetvusing":false,"dizquetvmem":0,"dizquetvcount":0,"ersatztvusing":false,"ersatztvmem":0,"ersatztvcount":0,"fileflowsusing":false,"fileflowsmem":0,"fileflowscount":0,"frigateusing":false,"frigatemem":0,"frigatecount":0,"deepstackusing":false,"deepstackmem":0,"deepstackcount":0,"nsfminerusing":false,"nsfminermem":0,"nsfminercount":0,"shinobiprousing":false,"shinobipromem":0,"shinobiprocount":0,"foldinghomeusing":false,"foldinghomemem":0,"foldinghomecount":0,"appssupp":["plex","jellyfin","handbrake","emby","tdarr","unmanic","dizquetv","ersatztv","fileflows","frigate","deepstack","nsfminer","shinobipro","foldinghome"],"panel":2},"0d:00.0":{"clock":0.5,"fan":0,"memclock":0.1,"memutil":"1.2%","memused":47.51,"power":"N\/A","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"43 \u00b0C","tempmax":105,"util":"0%","vendor":"AMD","name":"Radeon RX 6400\/6500 XT\/6500M","event":"0%","vertex":"0%","texture":"0%","shaderexp":"0%","sequencer":"0%","shaderinter":"0%","scancon":"0%","primassem":"0%","depthblk":"0%","colorblk":"0%","gfxtrans":"0.1%","transused":11.57,"memclockutil":"9.6%","clockutil":"21.6%","tempunit":"C","fanmax":5550,"voltage":0.7,"voltageunit":"V","panel":3}} root@computenode:/mnt/user/appdata/tasmotapm-unraid# My bar is zero as below. 1 Quote Link to comment
craigr Posted June 17, 2023 Share Posted June 17, 2023 9 hours ago, SimonF said: You need to look at gpustatusmulti.php for > 6.12 I do create a json file in /tmp/ with the values being passed to the panel. Will look at the bar. root@computenode:/mnt/user/appdata/tasmotapm-unraid# cat /tmp/gpu* I don't seem to have a tasmotapm-unraid directory or a gpustatusmulti.php file?!? Quote Link to comment
SimonF Posted June 17, 2023 Share Posted June 17, 2023 25 minutes ago, craigr said: I don't seem to have a tasmotapm-unraid directory or a gpustatusmulti.php file?!? plugins are in /usr/local/emhttp/plugins/ 1 Quote Link to comment
craigr Posted June 18, 2023 Share Posted June 18, 2023 10 hours ago, SimonF said: plugins are in /usr/local/emhttp/plugins/ const ES = ' '; include 'lib/Main.php'; include 'lib/Nvidia.php'; include 'lib/Intel.php'; include 'lib/AMD.php'; include 'lib/Error.php'; use gpustat\lib\AMD; use gpustat\lib\Main; use gpustat\lib\Nvidia; use gpustat\lib\Intel; use gpustat\lib\Error; if (!isset($gpustat_cfg)) { $gpustat_cfg = Main::getSettings(); } // $gpustat_inventory should be set if called from settings page code if (isset($gpustat_inventory) && $gpustat_inventory) { $gpustat_cfg['inventory'] = true; // Settings page looks for $gpustat_data specifically -- inventory all supported GPU types $gpustat_data = array_merge((new Nvidia($gpustat_cfg))->getInventorym(), (new Intel($gpustat_cfg))->getInventory(), (new AMD($gpustat_cfg))->getInventorym()); } else { $array=json_decode($_GET['gpus'],true) ; $data = array() ; foreach ($array as $gpu) { $gpustat_cfg["VENDOR"] = $gpu['vendor'] ; $gpustat_cfg["GPUID"] = $gpu['guid'] ; switch ($gpu['vendor']) { case 'amd': $return=(new AMD($gpustat_cfg))->getStatistics(); $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; case 'intel': $return=(new Intel($gpustat_cfg))->getStatistics(); $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; case 'nvidia': $return = (new Nvidia($gpustat_cfg))->getStatistics() ; $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; default: print_r(Error::get(Error::CONFIG_SETTINGS_NOT_VALID)); } } $json=json_encode($data) ; #Test data #$json='{"00:02.0":{"clock":100,"fan":50,"memclock":500,"memutil":55,"memused":55,"power":"100W","powermax":500,"rxutil":50,"txutil":60,"temp":50,"tempmax":200,"util":"40%","vendor":"Intel","name":"AlderLake-S GT1","3drender":"50%","blitter":"50%","interrupts":100,"powerutil":"10%","video":"20%","videnh":"30%","pa> header('Content-Type: application/json'); header('Content-Length:' . ES . strlen($json)); echo $json; file_put_contents("/tmp/gpujson","Time = ".date(DATE_RFC2822)."\n") ; file_put_contents("/tmp/gpujson",$json."\n",FILE_APPEND) ; } Quote Link to comment
SimonF Posted June 18, 2023 Share Posted June 18, 2023 1 hour ago, craigr said: const ES = ' '; include 'lib/Main.php'; include 'lib/Nvidia.php'; include 'lib/Intel.php'; include 'lib/AMD.php'; include 'lib/Error.php'; use gpustat\lib\AMD; use gpustat\lib\Main; use gpustat\lib\Nvidia; use gpustat\lib\Intel; use gpustat\lib\Error; if (!isset($gpustat_cfg)) { $gpustat_cfg = Main::getSettings(); } // $gpustat_inventory should be set if called from settings page code if (isset($gpustat_inventory) && $gpustat_inventory) { $gpustat_cfg['inventory'] = true; // Settings page looks for $gpustat_data specifically -- inventory all supported GPU types $gpustat_data = array_merge((new Nvidia($gpustat_cfg))->getInventorym(), (new Intel($gpustat_cfg))->getInventory(), (new AMD($gpustat_cfg))->getInventorym()); } else { $array=json_decode($_GET['gpus'],true) ; $data = array() ; foreach ($array as $gpu) { $gpustat_cfg["VENDOR"] = $gpu['vendor'] ; $gpustat_cfg["GPUID"] = $gpu['guid'] ; switch ($gpu['vendor']) { case 'amd': $return=(new AMD($gpustat_cfg))->getStatistics(); $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; case 'intel': $return=(new Intel($gpustat_cfg))->getStatistics(); $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; case 'nvidia': $return = (new Nvidia($gpustat_cfg))->getStatistics() ; $decode = json_decode($return,true); $decode["panel"] = $gpu['panel'] ; $data[$gpu["id"]] = $decode; break; default: print_r(Error::get(Error::CONFIG_SETTINGS_NOT_VALID)); } } $json=json_encode($data) ; #Test data #$json='{"00:02.0":{"clock":100,"fan":50,"memclock":500,"memutil":55,"memused":55,"power":"100W","powermax":500,"rxutil":50,"txutil":60,"temp":50,"tempmax":200,"util":"40%","vendor":"Intel","name":"AlderLake-S GT1","3drender":"50%","blitter":"50%","interrupts":100,"powerutil":"10%","video":"20%","videnh":"30%","pa> header('Content-Type: application/json'); header('Content-Length:' . ES . strlen($json)); echo $json; file_put_contents("/tmp/gpujson","Time = ".date(DATE_RFC2822)."\n") ; file_put_contents("/tmp/gpujson",$json."\n",FILE_APPEND) ; } cat you provide the output of cat /tmp/gpujson Quote Link to comment
craigr Posted June 18, 2023 Share Posted June 18, 2023 (edited) root@unRAID:/usr/local/emhttp/plugins/gpustat# cat /tmp/gpujson Time = Sat, 17 Jun 2023 23:02:17 -0500 {"00:02.0":{"clock":0,"fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"0W","powermax":"N\/A","rxutil":"6930.42 MB\/s","txutil":"2624.87 MB\/s","temp":"N\/A","tempmax":"N\/A","util":"0%","vendor":"Intel","name":"Coffee Lake-S GT2 [UHD Graphics P630]","3drender":"0%","blitter":"0%","interrupts":4,"powerutil":"0%","video":"0%","videnh":"0%","panel":1}} root@unRAID:/usr/local/emhttp/plugins/gpustat# Nothing running at the time. Edited June 18, 2023 by craigr Quote Link to comment
craigr Posted June 18, 2023 Share Posted June 18, 2023 root@unRAID:/usr/local/emhttp/plugins/gpustat# cat /tmp/gpujson Time = Sun, 18 Jun 2023 01:07:32 -0500 {"00:02.0":{"clock":1086,"fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"8.7W","powermax":"N\/A","rxutil":"17841.73 MB\/s","txutil":"5069.22 MB\/s","temp":"N\/A","tempmax":"N\/A","util":"68%","vendor":"Intel","name":"Coffee Lake-S GT2 [UHD Graphics P630]","3drender":"68%","blitter":"0%","interrupts":3098,"powerutil":"100%","video":"80%","videnh":"64%","panel":1}} Few transcodes running. Quote Link to comment
craigr Posted June 19, 2023 Share Posted June 19, 2023 My power draw bar graph is suddenly working correctly. Nothing that I know of has changed. I have not even rebooted the server. Quote Link to comment
craigr Posted June 19, 2023 Share Posted June 19, 2023 Spoke too soon. I tried a transcode and no matter how much power draw (0.1 - 10 w) the bar stayed at 100%. Now with zero draw it's at 100% again. Quote Link to comment
SimonF Posted June 19, 2023 Share Posted June 19, 2023 On 6/18/2023 at 7:09 AM, craigr said: root@unRAID:/usr/local/emhttp/plugins/gpustat# cat /tmp/gpujson Time = Sun, 18 Jun 2023 01:07:32 -0500 {"00:02.0":{"clock":1086,"fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"8.7W","powermax":"N\/A","rxutil":"17841.73 MB\/s","txutil":"5069.22 MB\/s","temp":"N\/A","tempmax":"N\/A","util":"68%","vendor":"Intel","name":"Coffee Lake-S GT2 [UHD Graphics P630]","3drender":"68%","blitter":"0%","interrupts":3098,"powerutil":"100%","video":"80%","videnh":"64%","panel":1}} Few transcodes running. Playing with your values I get 100% bar. change "powerutil":"100%" to 70% the bar is updated. This value On 6/17/2023 at 7:31 AM, craigr said: "rc6": { "value": 0.000000, "unit": "%" }, Is the percentage usage // According to the sparse documentation, rc6 is a percentage of how little the GPU is requesting power if ($this->settings['DISPPWRSTATE']) { if (isset($data['rc6']['value'])) { $this->pageData['powerutil'] = $this->roundFloat(100 - $data['rc6']['value'], 2) . "%"; } } 1 Quote Link to comment
craigr Posted June 21, 2023 Share Posted June 21, 2023 I'll give it a go when I get back from my business trip Thursday. Thank you. Quote Link to comment
craigr Posted June 21, 2023 Share Posted June 21, 2023 On 6/19/2023 at 12:36 PM, SimonF said: Playing with your values I get 100% bar. change "powerutil":"100%" to 70% the bar is updated. Wait. Sorry, but won't that only persist until reboot? Quote Link to comment
ich777 Posted June 21, 2023 Share Posted June 21, 2023 On 6/19/2023 at 9:17 AM, craigr said: Spoke too soon. I tried a transcode and no matter how much power draw (0.1 - 10 w) the bar stayed at 100%. Now with zero draw it's at 100% again. & @SimonF this is a common issue and is not related to the GPU Statistics plugin, this is actually caused by intel_gpu_top Just issue intel_gpu_top from a terminal and you should see that it reports 0% even if no load is on the GPU (this is when it doesn't work correctly). I've already reported that multiple times over on the Intel-GPU-Tools Gitlab but they can't reproduce this issue. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.